[v2 6/6] drm/i915/tgl/dsi: Enable blanking packets during BLLP for video mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Blanking packet bit will control whether the transcoder allows the link
to enter the LP state during BLLP regions (assuming there is enough time),
or whether it will keep the link in the HS state with a Blanking Packet

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 5 +++++
 drivers/gpu/drm/i915/i915_reg.h        | 1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index eaf2779b89b8..ae33639d48ba 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -685,6 +685,11 @@ gen11_dsi_configure_transcoder(struct intel_encoder *encoder,
 			break;
 		}
 
+		if (INTEL_GEN(dev_priv) >= 12) {
+			if (is_vid_mode(intel_dsi))
+				tmp |= BLANKING_PACKET_ENABLE;
+		}
+
 		/* program DSI operation mode */
 		if (is_vid_mode(intel_dsi)) {
 			tmp &= ~OP_MODE_MASK;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d2b76121d863..1a847f443ef7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -10979,6 +10979,7 @@ enum skl_power_gate {
 #define  CALIBRATION_DISABLED		(0x0 << 4)
 #define  CALIBRATION_ENABLED_INITIAL_ONLY	(0x2 << 4)
 #define  CALIBRATION_ENABLED_INITIAL_PERIODIC	(0x3 << 4)
+#define  BLANKING_PACKET_ENABLE		(1 << 2)
 #define  S3D_ORIENTATION_LANDSCAPE	(1 << 1)
 #define  EOTP_DISABLED			(1 << 0)
 
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux