From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
hsw_enable_pc8()/hsw_disable_pc8() are more less equivalent to
the display core init/unit functions of later platforms. Relocate
the hsw/bdw code into intel_runtime_pm.c so that it sits next to
its cousins.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 222 +----------------------
drivers/gpu/drm/i915/intel_display.h | 4 +
drivers/gpu/drm/i915/intel_drv.h | 2 -
drivers/gpu/drm/i915/intel_runtime_pm.c | 223 ++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_runtime_pm.h | 2 +
5 files changed, 230 insertions(+), 223 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d81ec80e34f6..a351c8e219ba 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8725,7 +8725,7 @@ static void lpt_enable_clkout_dp(struct drm_i915_private *dev_priv,
}
/* Sequence to disable CLKOUT_DP */
-static void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv)
+void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv)
{
u32 reg, tmp;
@@ -9482,226 +9482,6 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
return ret;
}
-
-static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
-{
- struct drm_device *dev = &dev_priv->drm;
- struct intel_crtc *crtc;
-
- for_each_intel_crtc(dev, crtc)
- I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
- pipe_name(crtc->pipe));
-
- I915_STATE_WARN(I915_READ(HSW_PWR_WELL_CTL2),
- "Display power well on\n");
- I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
- I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
- I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
- I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON, "Panel power on\n");
- I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
- "CPU PWM1 enabled\n");
- if (IS_HASWELL(dev_priv))
- I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
- "CPU PWM2 enabled\n");
- I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
- "PCH PWM1 enabled\n");
- I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
- "Utility pin enabled\n");
- I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
-
- /*
- * In theory we can still leave IRQs enabled, as long as only the HPD
- * interrupts remain enabled. We used to check for that, but since it's
- * gen-specific and since we only disable LCPLL after we fully disable
- * the interrupts, the check below should be enough.
- */
- I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
-}
-
-static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv)
-{
- if (IS_HASWELL(dev_priv))
- return I915_READ(D_COMP_HSW);
- else
- return I915_READ(D_COMP_BDW);
-}
-
-static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val)
-{
- if (IS_HASWELL(dev_priv)) {
- if (sandybridge_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP,
- val))
- DRM_DEBUG_KMS("Failed to write to D_COMP\n");
- } else {
- I915_WRITE(D_COMP_BDW, val);
- POSTING_READ(D_COMP_BDW);
- }
-}
-
-/*
- * This function implements pieces of two sequences from BSpec:
- * - Sequence for display software to disable LCPLL
- * - Sequence for display software to allow package C8+
- * The steps implemented here are just the steps that actually touch the LCPLL
- * register. Callers should take care of disabling all the display engine
- * functions, doing the mode unset, fixing interrupts, etc.
- */
-static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
- bool switch_to_fclk, bool allow_power_down)
-{
- u32 val;
-
- assert_can_disable_lcpll(dev_priv);
-
- val = I915_READ(LCPLL_CTL);
-
- if (switch_to_fclk) {
- val |= LCPLL_CD_SOURCE_FCLK;
- I915_WRITE(LCPLL_CTL, val);
-
- if (wait_for_us(I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE, 1))
- DRM_ERROR("Switching to FCLK failed\n");
-
- val = I915_READ(LCPLL_CTL);
- }
-
- val |= LCPLL_PLL_DISABLE;
- I915_WRITE(LCPLL_CTL, val);
- POSTING_READ(LCPLL_CTL);
-
- if (intel_wait_for_register(&dev_priv->uncore,
- LCPLL_CTL, LCPLL_PLL_LOCK, 0, 1))
- DRM_ERROR("LCPLL still locked\n");
-
- val = hsw_read_dcomp(dev_priv);
- val |= D_COMP_COMP_DISABLE;
- hsw_write_dcomp(dev_priv, val);
- ndelay(100);
-
- if (wait_for((hsw_read_dcomp(dev_priv) & D_COMP_RCOMP_IN_PROGRESS) == 0,
- 1))
- DRM_ERROR("D_COMP RCOMP still in progress\n");
-
- if (allow_power_down) {
- val = I915_READ(LCPLL_CTL);
- val |= LCPLL_POWER_DOWN_ALLOW;
- I915_WRITE(LCPLL_CTL, val);
- POSTING_READ(LCPLL_CTL);
- }
-}
-
-/*
- * Fully restores LCPLL, disallowing power down and switching back to LCPLL
- * source.
- */
-static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- val = I915_READ(LCPLL_CTL);
-
- if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
- LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
- return;
-
- /*
- * Make sure we're not on PC8 state before disabling PC8, otherwise
- * we'll hang the machine. To prevent PC8 state, just enable force_wake.
- */
- intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
-
- if (val & LCPLL_POWER_DOWN_ALLOW) {
- val &= ~LCPLL_POWER_DOWN_ALLOW;
- I915_WRITE(LCPLL_CTL, val);
- POSTING_READ(LCPLL_CTL);
- }
-
- val = hsw_read_dcomp(dev_priv);
- val |= D_COMP_COMP_FORCE;
- val &= ~D_COMP_COMP_DISABLE;
- hsw_write_dcomp(dev_priv, val);
-
- val = I915_READ(LCPLL_CTL);
- val &= ~LCPLL_PLL_DISABLE;
- I915_WRITE(LCPLL_CTL, val);
-
- if (intel_wait_for_register(&dev_priv->uncore,
- LCPLL_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK,
- 5))
- DRM_ERROR("LCPLL not locked yet\n");
-
- if (val & LCPLL_CD_SOURCE_FCLK) {
- val = I915_READ(LCPLL_CTL);
- val &= ~LCPLL_CD_SOURCE_FCLK;
- I915_WRITE(LCPLL_CTL, val);
-
- if (wait_for_us((I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
- DRM_ERROR("Switching back to LCPLL failed\n");
- }
-
- intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
-
- intel_update_cdclk(dev_priv);
- intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
-}
-
-/*
- * Package states C8 and deeper are really deep PC states that can only be
- * reached when all the devices on the system allow it, so even if the graphics
- * device allows PC8+, it doesn't mean the system will actually get to these
- * states. Our driver only allows PC8+ when going into runtime PM.
- *
- * The requirements for PC8+ are that all the outputs are disabled, the power
- * well is disabled and most interrupts are disabled, and these are also
- * requirements for runtime PM. When these conditions are met, we manually do
- * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
- * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
- * hang the machine.
- *
- * When we really reach PC8 or deeper states (not just when we allow it) we lose
- * the state of some registers, so when we come back from PC8+ we need to
- * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
- * need to take care of the registers kept by RC6. Notice that this happens even
- * if we don't put the device in PCI D3 state (which is what currently happens
- * because of the runtime PM support).
- *
- * For more, read "Display Sequences for Package C8" on the hardware
- * documentation.
- */
-void hsw_enable_pc8(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- DRM_DEBUG_KMS("Enabling package C8+\n");
-
- if (HAS_PCH_LPT_LP(dev_priv)) {
- val = I915_READ(SOUTH_DSPCLK_GATE_D);
- val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
- I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
- }
-
- lpt_disable_clkout_dp(dev_priv);
- hsw_disable_lcpll(dev_priv, true, true);
-}
-
-void hsw_disable_pc8(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- DRM_DEBUG_KMS("Disabling package C8+\n");
-
- hsw_restore_lcpll(dev_priv);
- lpt_init_pch_refclk(dev_priv);
-
- if (HAS_PCH_LPT_LP(dev_priv)) {
- val = I915_READ(SOUTH_DSPCLK_GATE_D);
- val |= PCH_LP_PARTITION_LEVEL_DISABLE;
- I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
- }
-}
-
static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
diff --git a/drivers/gpu/drm/i915/intel_display.h b/drivers/gpu/drm/i915/intel_display.h
index 2220588e86ac..1b6f5a71184d 100644
--- a/drivers/gpu/drm/i915/intel_display.h
+++ b/drivers/gpu/drm/i915/intel_display.h
@@ -28,6 +28,8 @@
#include <drm/drm_util.h>
#include <drm/i915_drm.h>
+struct drm_i915_private;
+
enum i915_gpio {
GPIOA,
GPIOB,
@@ -432,4 +434,6 @@ void intel_link_compute_m_n(u16 bpp, int nlanes,
struct intel_link_m_n *m_n,
bool constant_n);
bool is_ccs_modifier(u64 modifier);
+void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
+
#endif
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 4049e03d2c0d..247893ed1543 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1571,8 +1571,6 @@ void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
void intel_prepare_reset(struct drm_i915_private *dev_priv);
void intel_finish_reset(struct drm_i915_private *dev_priv);
-void hsw_enable_pc8(struct drm_i915_private *dev_priv);
-void hsw_disable_pc8(struct drm_i915_private *dev_priv);
unsigned int skl_cdclk_get_vco(unsigned int freq);
void intel_dp_get_m_n(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index b1fd2ae99199..b8fadd1b685c 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -3642,6 +3642,229 @@ static void hsw_assert_cdclk(struct drm_i915_private *dev_priv)
DRM_ERROR("LCPLL is disabled\n");
}
+static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = &dev_priv->drm;
+ struct intel_crtc *crtc;
+
+ for_each_intel_crtc(dev, crtc)
+ I915_STATE_WARN(crtc->active, "CRTC for pipe %c enabled\n",
+ pipe_name(crtc->pipe));
+
+ I915_STATE_WARN(I915_READ(HSW_PWR_WELL_CTL2),
+ "Display power well on\n");
+ I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE,
+ "SPLL enabled\n");
+ I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE,
+ "WRPLL1 enabled\n");
+ I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE,
+ "WRPLL2 enabled\n");
+ I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON,
+ "Panel power on\n");
+ I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
+ "CPU PWM1 enabled\n");
+ if (IS_HASWELL(dev_priv))
+ I915_STATE_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
+ "CPU PWM2 enabled\n");
+ I915_STATE_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
+ "PCH PWM1 enabled\n");
+ I915_STATE_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ "Utility pin enabled\n");
+ I915_STATE_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE,
+ "PCH GTC enabled\n");
+
+ /*
+ * In theory we can still leave IRQs enabled, as long as only the HPD
+ * interrupts remain enabled. We used to check for that, but since it's
+ * gen-specific and since we only disable LCPLL after we fully disable
+ * the interrupts, the check below should be enough.
+ */
+ I915_STATE_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
+}
+
+static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv)
+{
+ if (IS_HASWELL(dev_priv))
+ return I915_READ(D_COMP_HSW);
+ else
+ return I915_READ(D_COMP_BDW);
+}
+
+static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val)
+{
+ if (IS_HASWELL(dev_priv)) {
+ if (sandybridge_pcode_write(dev_priv,
+ GEN6_PCODE_WRITE_D_COMP, val))
+ DRM_DEBUG_KMS("Failed to write to D_COMP\n");
+ } else {
+ I915_WRITE(D_COMP_BDW, val);
+ POSTING_READ(D_COMP_BDW);
+ }
+}
+
+/*
+ * This function implements pieces of two sequences from BSpec:
+ * - Sequence for display software to disable LCPLL
+ * - Sequence for display software to allow package C8+
+ * The steps implemented here are just the steps that actually touch the LCPLL
+ * register. Callers should take care of disabling all the display engine
+ * functions, doing the mode unset, fixing interrupts, etc.
+ */
+static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
+ bool switch_to_fclk, bool allow_power_down)
+{
+ u32 val;
+
+ assert_can_disable_lcpll(dev_priv);
+
+ val = I915_READ(LCPLL_CTL);
+
+ if (switch_to_fclk) {
+ val |= LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ DRM_ERROR("Switching to FCLK failed\n");
+
+ val = I915_READ(LCPLL_CTL);
+ }
+
+ val |= LCPLL_PLL_DISABLE;
+ I915_WRITE(LCPLL_CTL, val);
+ POSTING_READ(LCPLL_CTL);
+
+ if (intel_wait_for_register(&dev_priv->uncore, LCPLL_CTL,
+ LCPLL_PLL_LOCK, 0, 1))
+ DRM_ERROR("LCPLL still locked\n");
+
+ val = hsw_read_dcomp(dev_priv);
+ val |= D_COMP_COMP_DISABLE;
+ hsw_write_dcomp(dev_priv, val);
+ ndelay(100);
+
+ if (wait_for((hsw_read_dcomp(dev_priv) &
+ D_COMP_RCOMP_IN_PROGRESS) == 0, 1))
+ DRM_ERROR("D_COMP RCOMP still in progress\n");
+
+ if (allow_power_down) {
+ val = I915_READ(LCPLL_CTL);
+ val |= LCPLL_POWER_DOWN_ALLOW;
+ I915_WRITE(LCPLL_CTL, val);
+ POSTING_READ(LCPLL_CTL);
+ }
+}
+
+/*
+ * Fully restores LCPLL, disallowing power down and switching back to LCPLL
+ * source.
+ */
+static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ val = I915_READ(LCPLL_CTL);
+
+ if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK |
+ LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK)
+ return;
+
+ /*
+ * Make sure we're not on PC8 state before disabling PC8, otherwise
+ * we'll hang the machine. To prevent PC8 state, just enable force_wake.
+ */
+ intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
+
+ if (val & LCPLL_POWER_DOWN_ALLOW) {
+ val &= ~LCPLL_POWER_DOWN_ALLOW;
+ I915_WRITE(LCPLL_CTL, val);
+ POSTING_READ(LCPLL_CTL);
+ }
+
+ val = hsw_read_dcomp(dev_priv);
+ val |= D_COMP_COMP_FORCE;
+ val &= ~D_COMP_COMP_DISABLE;
+ hsw_write_dcomp(dev_priv, val);
+
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_PLL_DISABLE;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (intel_wait_for_register(&dev_priv->uncore, LCPLL_CTL,
+ LCPLL_PLL_LOCK, LCPLL_PLL_LOCK, 5))
+ DRM_ERROR("LCPLL not locked yet\n");
+
+ if (val & LCPLL_CD_SOURCE_FCLK) {
+ val = I915_READ(LCPLL_CTL);
+ val &= ~LCPLL_CD_SOURCE_FCLK;
+ I915_WRITE(LCPLL_CTL, val);
+
+ if (wait_for_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ DRM_ERROR("Switching back to LCPLL failed\n");
+ }
+
+ intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
+
+ intel_update_cdclk(dev_priv);
+ intel_dump_cdclk_state(&dev_priv->cdclk.hw, "Current CDCLK");
+}
+
+/*
+ * Package states C8 and deeper are really deep PC states that can only be
+ * reached when all the devices on the system allow it, so even if the graphics
+ * device allows PC8+, it doesn't mean the system will actually get to these
+ * states. Our driver only allows PC8+ when going into runtime PM.
+ *
+ * The requirements for PC8+ are that all the outputs are disabled, the power
+ * well is disabled and most interrupts are disabled, and these are also
+ * requirements for runtime PM. When these conditions are met, we manually do
+ * the other conditions: disable the interrupts, clocks and switch LCPLL refclk
+ * to Fclk. If we're in PC8+ and we get an non-hotplug interrupt, we can hard
+ * hang the machine.
+ *
+ * When we really reach PC8 or deeper states (not just when we allow it) we lose
+ * the state of some registers, so when we come back from PC8+ we need to
+ * restore this state. We don't get into PC8+ if we're not in RC6, so we don't
+ * need to take care of the registers kept by RC6. Notice that this happens even
+ * if we don't put the device in PCI D3 state (which is what currently happens
+ * because of the runtime PM support).
+ *
+ * For more, read "Display Sequences for Package C8" on the hardware
+ * documentation.
+ */
+void hsw_enable_pc8(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ DRM_DEBUG_KMS("Enabling package C8+\n");
+
+ if (HAS_PCH_LPT_LP(dev_priv)) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val &= ~PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+
+ lpt_disable_clkout_dp(dev_priv);
+ hsw_disable_lcpll(dev_priv, true, true);
+}
+
+void hsw_disable_pc8(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ DRM_DEBUG_KMS("Disabling package C8+\n");
+
+ hsw_restore_lcpll(dev_priv);
+ intel_init_pch_refclk(dev_priv);
+
+ if (HAS_PCH_LPT_LP(dev_priv)) {
+ val = I915_READ(SOUTH_DSPCLK_GATE_D);
+ val |= PCH_LP_PARTITION_LEVEL_DISABLE;
+ I915_WRITE(SOUTH_DSPCLK_GATE_D, val);
+ }
+}
+
static void intel_pch_reset_handshake(struct drm_i915_private *dev_priv,
bool enable)
{
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.h b/drivers/gpu/drm/i915/intel_runtime_pm.h
index 69227756de3e..e30b38632bd2 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.h
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.h
@@ -37,6 +37,8 @@ void intel_power_domains_disable(struct drm_i915_private *dev_priv);
void intel_power_domains_suspend(struct drm_i915_private *dev_priv,
enum i915_drm_suspend_mode);
void intel_power_domains_resume(struct drm_i915_private *dev_priv);
+void hsw_enable_pc8(struct drm_i915_private *dev_priv);
+void hsw_disable_pc8(struct drm_i915_private *dev_priv);
void bxt_display_core_init(struct drm_i915_private *dev_priv, bool resume);
void bxt_display_core_uninit(struct drm_i915_private *dev_priv);
void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
