> -----Original Message-----
> From: Nikula, Jani
> Sent: Tuesday, April 30, 2019 3:03 PM
> To: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; intel-
> gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Syrjala, Ville <ville.syrjala@xxxxxxxxx>; Shankar, Uma
> <uma.shankar@xxxxxxxxx>; Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>
> Subject: Re: [v2 2/3] drm/i915: Fix pipe config mismatch for bpp, output format
>
> On Tue, 30 Apr 2019, Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx> wrote:
> > Read back the pixel fomrat register and get the bpp.
> >
> > v2: Read the PIPE_MISC register (Jani).
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/icl_dsi.c | 3 +++
> > drivers/gpu/drm/i915/intel_dsi.h | 1 +
> > drivers/gpu/drm/i915/vlv_dsi.c | 2 +-
> > 3 files changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/icl_dsi.c
> > b/drivers/gpu/drm/i915/icl_dsi.c index dbb2712..5cc58b2 100644
> > --- a/drivers/gpu/drm/i915/icl_dsi.c
> > +++ b/drivers/gpu/drm/i915/icl_dsi.c
> > @@ -1226,6 +1226,7 @@ static void gen11_dsi_get_config(struct
> > intel_encoder *encoder, {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > + struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
> >
> > /* FIXME: adapt icl_ddi_clock_get() for DSI and use that? */
> > pipe_config->port_clock =
> > @@ -1233,6 +1234,7 @@ static void gen11_dsi_get_config(struct
> intel_encoder *encoder,
> > pipe_config->base.adjusted_mode.crtc_clock = intel_dsi->pclk;
> > gen11_dsi_get_timings(encoder, pipe_config);
> > pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
> > + pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
> > }
> >
> > static int gen11_dsi_compute_config(struct intel_encoder *encoder, @@
> > -1248,6 +1250,7 @@ static int gen11_dsi_compute_config(struct
> intel_encoder *encoder,
> > struct drm_display_mode *adjusted_mode =
> > &pipe_config->base.adjusted_mode;
> >
> > + pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > intel_fixed_panel_mode(fixed_mode, adjusted_mode);
> > intel_pch_panel_fitting(crtc, pipe_config,
> > conn_state->scaling_mode);
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.h
> > b/drivers/gpu/drm/i915/intel_dsi.h
> > index 705a609..cb9e3b9 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.h
> > +++ b/drivers/gpu/drm/i915/intel_dsi.h
> > @@ -166,6 +166,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct
> > drm_connector *connector, struct intel_dsi_host *intel_dsi_host_init(struct
> intel_dsi *intel_dsi,
> > const struct mipi_dsi_host_ops
> *funcs,
> > enum port port);
> > +int bdw_get_pipemisc_bpp(struct intel_crtc *crtc);
>
> Until now this was internal to vlv_dsi.c and it was fine. Now, I think I'd move this
> to intel_display.c alongside haswell_set_pipemisc.
Ok, so I ll move thjs to intel_display.c and call it from haswell_get_pipe_config for is_dsi and gen >= 9
Thanks,
Vandita
>
> Ville already has patches to rename haswell_set_pipemisc to bdw_set_pipemisc.
>
> BR,
> Jani.
>
>
> >
> > /* vlv_dsi_pll.c */
> > int vlv_dsi_pll_compute(struct intel_encoder *encoder, diff --git
> > a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
> > index b4c6583..790ada8 100644
> > --- a/drivers/gpu/drm/i915/vlv_dsi.c
> > +++ b/drivers/gpu/drm/i915/vlv_dsi.c
> > @@ -260,7 +260,7 @@ static void band_gap_reset(struct drm_i915_private
> *dev_priv)
> > vlv_flisdsi_put(dev_priv);
> > }
> >
> > -static int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
> > +int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
> > {
> > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > u32 tmp;
>
> --
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
