Re: [PATCH 1/7] drm/i915/psr: Update PSR2 SU corruption workaround comment

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 03, 2019 at 05:39:40PM -0700, Runyan, Arthur J wrote:
> I update the Bspec as general programming.  SRD_CTL TP2 TP3 Select - "This bit impacts PSR2. Clear it before enabling PSR2 and do not set it while PSR2 is enabled."
> I haven't seen the hardware bug report come through yet to establish the wa number.

Thanks


Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>


> 
> > -----Original Message-----
> > From: Vivi, Rodrigo
> > Sent: Wednesday, 3 April, 2019 5:22 PM
> > To: Souza, Jose <jose.souza@xxxxxxxxx>; Runyan, Arthur J
> > <arthur.j.runyan@xxxxxxxxx>
> > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Pandiyan, Dhinakaran
> > <dhinakaran.pandiyan@xxxxxxxxx>
> > Subject: Re: [PATCH 1/7] drm/i915/psr: Update PSR2 SU corruption workaround
> > comment
> > 
> > On Wed, Apr 03, 2019 at 04:35:33PM -0700, José Roberto de Souza wrote:
> > > Turn out it is not a DMC bug it is actually a HW one, so this
> > > workaround will be needed for current gens, lets update the comment
> > > and remove the FIXME.
> > 
> > Do we have a Wa #number for this? p[art of workaround page
> > or just part of programming sequence?
> > 
> > >
> > > BSpec: 7723
> > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/intel_psr.c | 6 ++----
> > >  1 file changed, 2 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > b/drivers/gpu/drm/i915/intel_psr.c
> > > index ec874d802d48..c80bb3003a7d 100644
> > > --- a/drivers/gpu/drm/i915/intel_psr.c
> > > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > > @@ -531,10 +531,8 @@ static void hsw_activate_psr2(struct intel_dp
> > *intel_dp)
> > >  		val |= EDP_PSR2_TP2_TIME_2500us;
> > >
> > >  	/*
> > > -	 * FIXME: There is probably a issue in DMC
> > firmwares(icl_dmc_ver1_07.bin
> > > -	 * and kbl_dmc_ver1_04.bin at least) that causes PSR2 SU to fail after
> > > -	 * exiting DC6 if EDP_PSR_TP1_TP3_SEL is kept in PSR_CTL, so for now
> > > -	 * lets workaround the issue by cleaning PSR_CTL before enable PSR2.
> > > +	 * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is
> > > +	 * recommending keep this bit unset while PSR2 is enabled.
> > >  	 */
> > >  	I915_WRITE(EDP_PSR_CTL, 0);
> > >
> > > --
> > > 2.21.0
> > >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux