Re: [RFC v4 1/6] drm/i915/dp: Add a config function for YCBCR420 outputs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 06, 2019 at 09:30:57PM +0200, Gwan-gyeong Mun wrote:
> This patch checks a support of YCBCR420 outputs on an encoder level.
> If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
> output, else it continues with RGB output mode.
> It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
> a pipe scaler as RGB to YCbCr 4:4:4.
> 
> v2:
>   Addressed review comments from Ville.
>   Style fixed with few naming.
>   %s/config/crtc_state/
>   %s/intel_crtc/crtc/
>   If lscon is active, it makes not to call intel_dp_ycbcr420_config()
>   to avoid to clobber of lspcon_ycbcr420_config() routine.
>   And it move the 420_only check into the intel_dp_ycbcr420_config().
> 
> v3: Fix uninitialized return value and it is reported by Dan Carpenter.
> 
> Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_dp.c | 39 ++++++++++++++++++++++++++++++++-
>  1 file changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index e1a051c0fbfe..882afba6e0f1 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -2104,6 +2104,38 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>  	return 0;
>  }
>  
> +static int
> +intel_dp_ycbcr420_config(struct drm_connector *connector,
> +			 struct intel_crtc_state *crtc_state)
> +{
> +	const struct drm_display_info *info = &connector->display_info;
> +	const struct drm_display_mode *adjusted_mode =
> +		&crtc_state->base.adjusted_mode;
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +	int ret;
> +
> +	if (drm_mode_is_420_only(info, adjusted_mode) &&
> +	    connector->ycbcr_420_allowed) {

I would invert this into an early return. That way we avoid the
extra indentation for the rest of the function.

> +		crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
> +
> +		/* YCBCR 420 output conversion needs a scaler */
> +		ret = skl_update_scaler_crtc(crtc_state);
> +		if (ret) {
> +			DRM_DEBUG_KMS("Scaler allocation for output failed\n");
> +			goto err;
> +		}
> +
> +		intel_pch_panel_fitting(crtc, crtc_state,
> +					DRM_MODE_SCALE_FULLSCREEN);
> +	}
> +
> +	return 0;
> +
> +err:
> +	DRM_ERROR("Can't support YCBCR420 output\n");

Remove the error print. That is user triggerable which means
no errors prints allowed. And we already have the debug print.

> +	return ret;
> +}
> +
>  int
>  intel_dp_compute_config(struct intel_encoder *encoder,
>  			struct intel_crtc_state *pipe_config,
> @@ -2120,7 +2152,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  		to_intel_digital_connector_state(conn_state);
>  	bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
>  					   DP_DPCD_QUIRK_CONSTANT_N);
> -	int ret;
> +	int ret = 0;
>  
>  	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
>  		pipe_config->has_pch_encoder = true;
> @@ -2128,6 +2160,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	if (lspcon->active)
>  		lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
> +	else
> +		ret = intel_dp_ycbcr420_config(&intel_connector->base, pipe_config);
> +
> +	if (ret)
> +		return ret;
>  
>  	pipe_config->has_drrs = false;
>  	if (IS_G4X(dev_priv) || port == PORT_A)
> -- 
> 2.21.0

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux