This patch checks a support of YCBCR420 outputs on an encoder level.
If the input mode is YCBCR420-only mode then it prepares DP as an YCBCR420
output, else it continues with RGB output mode.
It set output_format to INTEL_OUTPUT_FORMAT_YCBCR420 in order to using
a pipe scaler as RGB to YCbCr 4:4:4.
v2:
Addressed review comments from Ville.
Style fixed with few naming.
%s/config/crtc_state/
%s/intel_crtc/crtc/
If lscon is active, it makes not to call intel_dp_ycbcr420_config()
to avoid to clobber of lspcon_ycbcr420_config() routine.
And it move the 420_only check into the intel_dp_ycbcr420_config().
v3: Fix uninitialized return value and it is reported by Dan Carpenter.
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@xxxxxxxxx>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 39 ++++++++++++++++++++++++++++++++-
1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e1a051c0fbfe..882afba6e0f1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2104,6 +2104,38 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
return 0;
}
+static int
+intel_dp_ycbcr420_config(struct drm_connector *connector,
+ struct intel_crtc_state *crtc_state)
+{
+ const struct drm_display_info *info = &connector->display_info;
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->base.adjusted_mode;
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
+ int ret;
+
+ if (drm_mode_is_420_only(info, adjusted_mode) &&
+ connector->ycbcr_420_allowed) {
+ crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+
+ /* YCBCR 420 output conversion needs a scaler */
+ ret = skl_update_scaler_crtc(crtc_state);
+ if (ret) {
+ DRM_DEBUG_KMS("Scaler allocation for output failed\n");
+ goto err;
+ }
+
+ intel_pch_panel_fitting(crtc, crtc_state,
+ DRM_MODE_SCALE_FULLSCREEN);
+ }
+
+ return 0;
+
+err:
+ DRM_ERROR("Can't support YCBCR420 output\n");
+ return ret;
+}
+
int
intel_dp_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
@@ -2120,7 +2152,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
to_intel_digital_connector_state(conn_state);
bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
DP_DPCD_QUIRK_CONSTANT_N);
- int ret;
+ int ret = 0;
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && port != PORT_A)
pipe_config->has_pch_encoder = true;
@@ -2128,6 +2160,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
if (lspcon->active)
lspcon_ycbcr420_config(&intel_connector->base, pipe_config);
+ else
+ ret = intel_dp_ycbcr420_config(&intel_connector->base, pipe_config);
+
+ if (ret)
+ return ret;
pipe_config->has_drrs = false;
if (IS_G4X(dev_priv) || port == PORT_A)
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
