Re: [v6 4/6] drm/i915/icl: Enable ICL Pipe CSC block

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 16, 2019 at 09:51:35PM +0530, Uma Shankar wrote:
> Enable ICL pipe csc hardware. CSC block is enabled
> in CSC_MODE register instead of PLANE_COLOR_CTL.
> 
> ToDO: Extend the ABI to accept 32 bit coefficient values
> instead of 16bit for future platforms.
> 
> v2: Addressed Maarten's review comments.
> 
> v3: Addressed Matt's review comments. Removed rmw patterns
> as suggested by Matt.
> 
> v4: Addressed Matt's review comments.
> 
> v5: Addressed Ville's review comments.
> 
> v6: Separated pipe output csc programming from regular csc.
> 
> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h    | 9 ++++++---
>  drivers/gpu/drm/i915/intel_color.c | 7 ++++++-
>  2 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a84200f..3c3a902 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9861,10 +9861,13 @@ enum skl_power_gate {
>  #define _PIPE_A_CSC_COEFF_BU	0x4901c
>  #define _PIPE_A_CSC_COEFF_RV_GV	0x49020
>  #define _PIPE_A_CSC_COEFF_BV	0x49024
> +
>  #define _PIPE_A_CSC_MODE	0x49028
> -#define   CSC_BLACK_SCREEN_OFFSET	(1 << 2)
> -#define   CSC_POSITION_BEFORE_GAMMA	(1 << 1)
> -#define   CSC_MODE_YUV_TO_RGB		(1 << 0)
> +#define  ICL_CSC_ENABLE			(1 << 31)
> +#define  CSC_BLACK_SCREEN_OFFSET	(1 << 2)
> +#define  CSC_POSITION_BEFORE_GAMMA	(1 << 1)
> +#define  CSC_MODE_YUV_TO_RGB		(1 << 0)
> +
>  #define _PIPE_A_CSC_PREOFF_HI	0x49030
>  #define _PIPE_A_CSC_PREOFF_ME	0x49034
>  #define _PIPE_A_CSC_PREOFF_LO	0x49038
> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> index 494891c..9b8d2de 100644
> --- a/drivers/gpu/drm/i915/intel_color.c
> +++ b/drivers/gpu/drm/i915/intel_color.c
> @@ -134,6 +134,7 @@ static void ilk_load_ycbcr_conversion_matrix(struct intel_crtc *crtc)
>  	I915_WRITE(PIPE_CSC_POSTOFF_HI(pipe), POSTOFF_RGB_TO_YUV_HI);
>  	I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), POSTOFF_RGB_TO_YUV_ME);
>  	I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), POSTOFF_RGB_TO_YUV_LO);
> +
>  	I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>  }

Seems like an unintentional change?

Otherwise, this looks good now that the output csc for rgb->yuv is moved
to the next patch.

Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>

>  
> @@ -242,7 +243,10 @@ static void ilk_load_csc_matrix(struct intel_crtc_state *crtc_state)
>  		I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
>  		I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
>  
> -		I915_WRITE(PIPE_CSC_MODE(pipe), 0);
> +		if (INTEL_GEN(dev_priv) >= 11)
> +			I915_WRITE(PIPE_CSC_MODE(pipe), ICL_CSC_ENABLE);
> +		else
> +			I915_WRITE(PIPE_CSC_MODE(pipe), 0);
>  	} else {
>  		uint32_t mode = CSC_MODE_YUV_TO_RGB;
>  
> @@ -692,6 +696,7 @@ void intel_color_init(struct intel_crtc *crtc)
>  		dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>  		dev_priv->display.load_luts = glk_load_luts;
>  	} else if (IS_ICELAKE(dev_priv)) {
> +		dev_priv->display.load_csc_matrix = ilk_load_csc_matrix;
>  		dev_priv->display.load_luts = icl_load_luts;
>  	} else {
>  		dev_priv->display.load_luts = i9xx_load_luts;
> -- 
> 1.9.1
> 

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux