On 2018.11.19 20:54:30 +0200, Imre Deak wrote:
> On Mon, Nov 19, 2018 at 05:29:26PM +0200, Ville Syrjälä wrote:
> > On Mon, Nov 19, 2018 at 04:41:07PM +0200, Imre Deak wrote:
> > > Depending on the transcoder enum values to translate from transcoder
> > > to pipe/transcoder register addresses can easily break if we add a new
> > > transcoder. So remove the dependency by using named initializers.
> > >
> > > Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/i915_pci.c | 52 ++++++++++++++++++++++++++++++-----------
> > > 1 file changed, 38 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
> > > index 983ae7fd8217..1b81d7cb209e 100644
> > > --- a/drivers/gpu/drm/i915/i915_pci.c
> > > +++ b/drivers/gpu/drm/i915/i915_pci.c
> > > @@ -33,16 +33,30 @@
> > > #define GEN(x) .gen = (x), .gen_mask = BIT((x) - 1)
> > >
> > > #define GEN_DEFAULT_PIPEOFFSETS \
> > > - .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > > - PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
> > > - .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > > - TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }
> > > + .pipe_offsets = { \
> > > + [TRANSCODER_A] = PIPE_A_OFFSET, \
> > > + [TRANSCODER_B] = PIPE_B_OFFSET, \
> > > + [TRANSCODER_C] = PIPE_C_OFFSET, \
> > > + [TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
> >
> > Hmm. We do define this as int pipe_offsets[I915_MAX_TRANSCODERS], and
> > PIPECONF/TRANSCONF is per-transcoder so I suppose using TRANSCODER_foo
> > here make sense.
> >
> > Couple of things that came to mind while thinking about this:
> > - pipe_offsets[] & co. could probably be u32 since we don't
> > need negative values
>
> Ok, can follow up with that.
>
> > - _PIPE_EDP could be removed, which would maybe shrink a few
> > arrays based on I915_MAX_PIPES
>
> Agreed. Looks like all the users are in gvt:
>
> - PIPECONF(_PIPE_EDP) should use PIPECONF(TRANSCODER_EDP) instead. The
> current code would also break if we added a new transcoder.
yeah, agreed.
> - AFAICS
> PIPEDSL(_PIPE_EDP)
> PIPESTAT(_PIPE_EDP)
> PIPE_FRMCOUNT_G4X(_PIPE_EDP)
> PIPE_FLIPCOUNT_G4X(_PIPE_EDP)
> are bogus, since these registers don't exist.
>
Thanks for pointing this out, looks they were added in very beginning,
will remove those after double check.
thanks
> Adding gvt folks for these.
>
> >
> > Patch is
> > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > > + }, \
> > > + .trans_offsets = { \
> > > + [TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > > + [TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > > + [TRANSCODER_C] = TRANSCODER_C_OFFSET, \
> > > + [TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
> > > + }
> > >
> > > #define GEN_CHV_PIPEOFFSETS \
> > > - .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > > - CHV_PIPE_C_OFFSET }, \
> > > - .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > > - CHV_TRANSCODER_C_OFFSET }
> > > + .pipe_offsets = { \
> > > + [TRANSCODER_A] = PIPE_A_OFFSET, \
> > > + [TRANSCODER_B] = PIPE_B_OFFSET, \
> > > + [TRANSCODER_C] = CHV_PIPE_C_OFFSET, \
> > > + }, \
> > > + .trans_offsets = { \
> > > + [TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > > + [TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > > + [TRANSCODER_C] = CHV_TRANSCODER_C_OFFSET, \
> > > + }
> > >
> > > #define CURSOR_OFFSETS \
> > > .cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
> > > @@ -592,12 +606,22 @@ static const struct intel_device_info intel_cannonlake_info = {
> > >
> > > #define GEN11_FEATURES \
> > > GEN10_FEATURES, \
> > > - .pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > > - PIPE_C_OFFSET, PIPE_EDP_OFFSET, \
> > > - PIPE_DSI0_OFFSET, PIPE_DSI1_OFFSET }, \
> > > - .trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > > - TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET, \
> > > - TRANSCODER_DSI0_OFFSET, TRANSCODER_DSI1_OFFSET}, \
> > > + .pipe_offsets = { \
> > > + [TRANSCODER_A] = PIPE_A_OFFSET, \
> > > + [TRANSCODER_B] = PIPE_B_OFFSET, \
> > > + [TRANSCODER_C] = PIPE_C_OFFSET, \
> > > + [TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
> > > + [TRANSCODER_DSI_0] = PIPE_DSI0_OFFSET, \
> > > + [TRANSCODER_DSI_1] = PIPE_DSI1_OFFSET, \
> > > + }, \
> > > + .trans_offsets = { \
> > > + [TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > > + [TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > > + [TRANSCODER_C] = TRANSCODER_C_OFFSET, \
> > > + [TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
> > > + [TRANSCODER_DSI_0] = TRANSCODER_DSI0_OFFSET, \
> > > + [TRANSCODER_DSI_1] = TRANSCODER_DSI1_OFFSET, \
> > > + }, \
> > > GEN(11), \
> > > .ddb_size = 2048, \
> > > .has_logical_ring_elsq = 1
> > > --
> > > 2.13.2
> >
> > --
> > Ville Syrjälä
> > Intel
--
Open Source Technology Center, Intel ltd.
$gpg --keyserver wwwkeys.pgp.net --recv-keys 4D781827
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
