Re: [PATCH 1/3] drm/i915: Make pipe/transcoder offsets not depend on enum values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Nov 19, 2018 at 05:29:26PM +0200, Ville Syrjälä wrote:
> On Mon, Nov 19, 2018 at 04:41:07PM +0200, Imre Deak wrote:
> > Depending on the transcoder enum values to translate from transcoder
> > to pipe/transcoder register addresses can easily break if we add a new
> > transcoder. So remove the dependency by using named initializers.
> > 
> > Suggested-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/i915_pci.c | 52 ++++++++++++++++++++++++++++++-----------
> >  1 file changed, 38 insertions(+), 14 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
> > index 983ae7fd8217..1b81d7cb209e 100644
> > --- a/drivers/gpu/drm/i915/i915_pci.c
> > +++ b/drivers/gpu/drm/i915/i915_pci.c
> > @@ -33,16 +33,30 @@
> >  #define GEN(x) .gen = (x), .gen_mask = BIT((x) - 1)
> >  
> >  #define GEN_DEFAULT_PIPEOFFSETS \
> > -	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > -			  PIPE_C_OFFSET, PIPE_EDP_OFFSET }, \
> > -	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > -			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET }
> > +	.pipe_offsets = { \
> > +		[TRANSCODER_A] = PIPE_A_OFFSET,	\
> > +		[TRANSCODER_B] = PIPE_B_OFFSET, \
> > +		[TRANSCODER_C] = PIPE_C_OFFSET, \
> > +		[TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
> 
> Hmm. We do define this as int pipe_offsets[I915_MAX_TRANSCODERS], and
> PIPECONF/TRANSCONF is per-transcoder so I suppose using TRANSCODER_foo
> here make sense.
> 
> Couple of things that came to mind while thinking about this:
> - pipe_offsets[] & co. could probably be u32 since we don't
>   need negative values

Ok, can follow up with that.

> - _PIPE_EDP could be removed, which would maybe shrink a few
>   arrays based on I915_MAX_PIPES

Agreed. Looks like all the users are in gvt:

- PIPECONF(_PIPE_EDP) should use PIPECONF(TRANSCODER_EDP) instead. The
  current code would also break if we added a new transcoder.
- AFAICS
	PIPEDSL(_PIPE_EDP)
	PIPESTAT(_PIPE_EDP)
	PIPE_FRMCOUNT_G4X(_PIPE_EDP)
	PIPE_FLIPCOUNT_G4X(_PIPE_EDP)
  are bogus, since these registers don't exist.

Adding gvt folks for these.

> 
> Patch is
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> > +	}, \
> > +	.trans_offsets = { \
> > +		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > +		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > +		[TRANSCODER_C] = TRANSCODER_C_OFFSET, \
> > +		[TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
> > +	}
> >  
> >  #define GEN_CHV_PIPEOFFSETS \
> > -	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > -			  CHV_PIPE_C_OFFSET }, \
> > -	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > -			   CHV_TRANSCODER_C_OFFSET }
> > +	.pipe_offsets = { \
> > +		[TRANSCODER_A] = PIPE_A_OFFSET, \
> > +		[TRANSCODER_B] = PIPE_B_OFFSET, \
> > +		[TRANSCODER_C] = CHV_PIPE_C_OFFSET, \
> > +	}, \
> > +	.trans_offsets = { \
> > +		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > +		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > +		[TRANSCODER_C] = CHV_TRANSCODER_C_OFFSET, \
> > +	}
> >  
> >  #define CURSOR_OFFSETS \
> >  	.cursor_offsets = { CURSOR_A_OFFSET, CURSOR_B_OFFSET, CHV_CURSOR_C_OFFSET }
> > @@ -592,12 +606,22 @@ static const struct intel_device_info intel_cannonlake_info = {
> >  
> >  #define GEN11_FEATURES \
> >  	GEN10_FEATURES, \
> > -	.pipe_offsets = { PIPE_A_OFFSET, PIPE_B_OFFSET, \
> > -			  PIPE_C_OFFSET, PIPE_EDP_OFFSET, \
> > -			  PIPE_DSI0_OFFSET, PIPE_DSI1_OFFSET }, \
> > -	.trans_offsets = { TRANSCODER_A_OFFSET, TRANSCODER_B_OFFSET, \
> > -			   TRANSCODER_C_OFFSET, TRANSCODER_EDP_OFFSET, \
> > -			   TRANSCODER_DSI0_OFFSET, TRANSCODER_DSI1_OFFSET}, \
> > +	.pipe_offsets = { \
> > +		[TRANSCODER_A] = PIPE_A_OFFSET, \
> > +		[TRANSCODER_B] = PIPE_B_OFFSET, \
> > +		[TRANSCODER_C] = PIPE_C_OFFSET, \
> > +		[TRANSCODER_EDP] = PIPE_EDP_OFFSET, \
> > +		[TRANSCODER_DSI_0] = PIPE_DSI0_OFFSET, \
> > +		[TRANSCODER_DSI_1] = PIPE_DSI1_OFFSET, \
> > +	}, \
> > +	.trans_offsets = { \
> > +		[TRANSCODER_A] = TRANSCODER_A_OFFSET, \
> > +		[TRANSCODER_B] = TRANSCODER_B_OFFSET, \
> > +		[TRANSCODER_C] = TRANSCODER_C_OFFSET, \
> > +		[TRANSCODER_EDP] = TRANSCODER_EDP_OFFSET, \
> > +		[TRANSCODER_DSI_0] = TRANSCODER_DSI0_OFFSET, \
> > +		[TRANSCODER_DSI_1] = TRANSCODER_DSI1_OFFSET, \
> > +	}, \
> >  	GEN(11), \
> >  	.ddb_size = 2048, \
> >  	.has_logical_ring_elsq = 1
> > -- 
> > 2.13.2
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux