Re: [PATCH 1/3] drm/i915/gen9_bc: Work around DMC bug zeroing power well requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 09, 2018 at 05:04:40PM +0200, Ville Syrjälä wrote:
> On Fri, Nov 09, 2018 at 04:58:20PM +0200, Imre Deak wrote:
> > A DMC bug on GEN9 big core machines fails to restore the driver's
> > request bits for the PW1 and MISC_IO power wells after a DC5/6
> > entry->exit sequence. As a consequence the driver's subsequent check for
> > the enabled status of these power wells will fail, as the check
> > considers the power wells being enabled only if both the status and
> > request bits are set. To work around this borrow the request bits from
> > BIOS's own request register in which DMC forces on the request bits when
> > exiting from DC5/6.
> > 
> > This fixes a problem reported by Ramalingam, where HDCP init failed,
> > since PW1 reported itself as being disabled, while in reality it was
> > enabled.
> > 
> > Reported-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> > Cc: Ramalingam C <ramalingam.c@xxxxxxxxx>
> > Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_runtime_pm.c | 16 +++++++++++++++-
> >  1 file changed, 15 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index f945db6ea420..9c49b876055d 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -493,11 +493,25 @@ static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
> >  				   struct i915_power_well *power_well)
> >  {
> >  	const struct i915_power_well_regs *regs = power_well->desc->hsw.regs;
> > +	enum i915_power_well_id id = power_well->desc->id;
> >  	int pw_idx = power_well->desc->hsw.idx;
> >  	u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) |
> >  		   HSW_PWR_WELL_CTL_STATE(pw_idx);
> > +	u32 val;
> > +
> > +	val = I915_READ(regs->driver);
> > +
> > +	/*
> > +	 * On GEN9 big core due to a DMC bug the driver's request bits for PW1
> > +	 * and the MISC_IO PW will be not restored, so check instead for the
> > +	 * BIOS's own request bits, which are forced-on for these power wells
> > +	 * when exiting DC5/6.
> > +	 */
> > +	if (IS_GEN9(dev_priv) && !IS_GEN9_LP(dev_priv) &&
> 
> IS_GEN9_BC() ?

Yep, should've known there must be a macro for this already :/  

> 
> Apart from that
> Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> 
> > +	    (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO))
> > +		val |= I915_READ(regs->bios);
> >  
> > -	return (I915_READ(regs->driver) & mask) == mask;
> > +	return (val & mask) == mask;
> >  }
> >  
> >  static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
> > -- 
> > 2.13.2
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux