On 10/15/2018 7:57 PM, Jani Nikula wrote:
From: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.
v2: Use newly defined bitfields for data and clock lane
v3 by Jani:
- Rebase on dphy abstraction
- Reduce local variables
- Remove unrelated comment changes (Ville)
- Use the same style for range checks as VLV (Ville)
- Assign, don't OR dphy_reg contents
v3 changes looks fine to me.
Regards,
Madhav
Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/i915/icl_dsi.c | 18 ++++++
drivers/gpu/drm/i915/intel_dsi.h | 3 +
drivers/gpu/drm/i915/intel_dsi_vbt.c | 110 ++++++++++++++++++++++++++++++++++-
3 files changed, 130 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index ff5b285ca495..9602b6532028 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -291,6 +291,24 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
tmp |= intel_dsi->init_count;
I915_WRITE(ICL_DSI_T_INIT_MASTER(port), tmp);
}
+
+ /* Program DPHY clock lanes timings */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(DPHY_CLK_TIMING_PARAM(port), intel_dsi->dphy_reg);
+
+ /* shadow register inside display core */
+ I915_WRITE(DSI_CLK_TIMING_PARAM(port), intel_dsi->dphy_reg);
+ }
+
+ /* Program DPHY data lanes timings */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ I915_WRITE(DPHY_DATA_TIMING_PARAM(port),
+ intel_dsi->dphy_data_lane_reg);
+
+ /* shadow register inside display core */
+ I915_WRITE(DSI_DATA_TIMING_PARAM(port),
+ intel_dsi->dphy_data_lane_reg);
+ }
}
static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index d7c0c599b52d..12b758ebefce 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -85,6 +85,9 @@ struct intel_dsi {
u32 port_bits;
u32 bw_timer;
u32 dphy_reg;
+
+ /* data lanes dphy timing */
+ u32 dphy_data_lane_reg;
u32 video_frmt_cfg_bits;
u16 lp_byte_clk;
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 5e16b4c5f531..3035422aa0d6 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -510,6 +510,111 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi)
return 1;
}
+#define ICL_PREPARE_CNT_MAX 0x7
+#define ICL_CLK_ZERO_CNT_MAX 0xf
+#define ICL_TRAIL_CNT_MAX 0x7
+#define ICL_TCLK_PRE_CNT_MAX 0x3
+#define ICL_TCLK_POST_CNT_MAX 0x7
+#define ICL_HS_ZERO_CNT_MAX 0xf
+#define ICL_EXIT_ZERO_CNT_MAX 0x7
+
+static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+ u32 tlpx_ns;
+ u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
+ u32 ths_prepare_ns, tclk_trail_ns;
+ u32 hs_zero_cnt;
+ u32 tclk_pre_cnt, tclk_post_cnt;
+
+ tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
+
+ tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
+ ths_prepare_ns = max(mipi_config->ths_prepare,
+ mipi_config->tclk_prepare);
+
+ /*
+ * prepare cnt in escape clocks
+ * this field represents a hexadecimal value with a precision
+ * of 1.2 – i.e. the most significant bit is the integer
+ * and the least significant 2 bits are fraction bits.
+ * so, the field can represent a range of 0.25 to 1.75
+ */
+ prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * 4, tlpx_ns);
+ if (prepare_cnt > ICL_PREPARE_CNT_MAX) {
+ DRM_DEBUG_KMS("prepare_cnt out of range (%d)\n", prepare_cnt);
+ prepare_cnt = ICL_PREPARE_CNT_MAX;
+ }
+
+ /* clk zero count in escape clocks */
+ clk_zero_cnt = DIV_ROUND_UP(mipi_config->tclk_prepare_clkzero -
+ ths_prepare_ns, tlpx_ns);
+ if (clk_zero_cnt > ICL_CLK_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("clk_zero_cnt out of range (%d)\n", clk_zero_cnt);
+ clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
+ }
+
+ /* trail cnt in escape clocks*/
+ trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
+ if (trail_cnt > ICL_TRAIL_CNT_MAX) {
+ DRM_DEBUG_KMS("trail_cnt out of range (%d)\n", trail_cnt);
+ trail_cnt = ICL_TRAIL_CNT_MAX;
+ }
+
+ /* tclk pre count in escape clocks */
+ tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
+ if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
+ DRM_DEBUG_KMS("tclk_pre_cnt out of range (%d)\n", tclk_pre_cnt);
+ tclk_pre_cnt = ICL_TCLK_PRE_CNT_MAX;
+ }
+
+ /* tclk post count in escape clocks */
+ tclk_post_cnt = DIV_ROUND_UP(mipi_config->tclk_post, tlpx_ns);
+ if (tclk_post_cnt > ICL_TCLK_POST_CNT_MAX) {
+ DRM_DEBUG_KMS("tclk_post_cnt out of range (%d)\n", tclk_post_cnt);
+ tclk_post_cnt = ICL_TCLK_POST_CNT_MAX;
+ }
+
+ /* hs zero cnt in escape clocks */
+ hs_zero_cnt = DIV_ROUND_UP(mipi_config->ths_prepare_hszero -
+ ths_prepare_ns, tlpx_ns);
+ if (hs_zero_cnt > ICL_HS_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("hs_zero_cnt out of range (%d)\n", hs_zero_cnt);
+ hs_zero_cnt = ICL_HS_ZERO_CNT_MAX;
+ }
+
+ /* hs exit zero cnt in escape clocks */
+ exit_zero_cnt = DIV_ROUND_UP(mipi_config->ths_exit, tlpx_ns);
+ if (exit_zero_cnt > ICL_EXIT_ZERO_CNT_MAX) {
+ DRM_DEBUG_KMS("exit_zero_cnt out of range (%d)\n", exit_zero_cnt);
+ exit_zero_cnt = ICL_EXIT_ZERO_CNT_MAX;
+ }
+
+ /* clock lane dphy timings */
+ intel_dsi->dphy_reg = (CLK_PREPARE_OVERRIDE |
+ CLK_PREPARE(prepare_cnt) |
+ CLK_ZERO_OVERRIDE |
+ CLK_ZERO(clk_zero_cnt) |
+ CLK_PRE_OVERRIDE |
+ CLK_PRE(tclk_pre_cnt) |
+ CLK_POST_OVERRIDE |
+ CLK_POST(tclk_post_cnt) |
+ CLK_TRAIL_OVERRIDE |
+ CLK_TRAIL(trail_cnt));
+
+ /* data lanes dphy timings */
+ intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
+ HS_PREPARE(prepare_cnt) |
+ HS_ZERO_OVERRIDE |
+ HS_ZERO(hs_zero_cnt) |
+ HS_TRAIL_OVERRIDE |
+ HS_TRAIL(trail_cnt) |
+ HS_EXIT_OVERRIDE |
+ HS_EXIT(exit_zero_cnt));
+}
+
static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
@@ -743,7 +848,10 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
intel_dsi->burst_mode_ratio = burst_mode_ratio;
- vlv_dphy_param_init(intel_dsi);
+ if (IS_ICELAKE(dev_priv))
+ icl_dphy_param_init(intel_dsi);
+ else
+ vlv_dphy_param_init(intel_dsi);
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx