On Mon, Jul 09, 2018 at 09:22:21AM -0700, Lucas De Marchi wrote:
> Instead of defining all registers twice, define just a PCH_GPIO_BASE
> that has the same address as PCH_GPIO_A and use that to calculate all
> the others. This also brings VLV and !HAS_GMCH_DISPLAY in line, doing
> the same thing.
>
> This also rewrites the GMBUS[05] registers since they depend on
> gpio_mmio_base.
>
> v2: Fix GMBUS registers to be relative to gpio base; create GPIO()
> macro to return a particular gpio address and move the enum out of
> i915_reg.h (suggested by Jani)
>
> Signed-off-by: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/gvt/handlers.c | 2 +-
> drivers/gpu/drm/i915/i915_reg.h | 53 +++++++++++++++--------------
> drivers/gpu/drm/i915/intel_drv.h | 16 +++++++++
> drivers/gpu/drm/i915/intel_i2c.c | 16 ++++-----
> 4 files changed, 52 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
> index e39492aaff6c..e25a74fe753b 100644
> --- a/drivers/gpu/drm/i915/gvt/handlers.c
> +++ b/drivers/gpu/drm/i915/gvt/handlers.c
> @@ -2084,7 +2084,7 @@ static int init_generic_mmio_info(struct intel_gvt *gvt)
>
> MMIO_F(PCH_GMBUS0, 4 * 4, 0, 0, 0, D_ALL, gmbus_mmio_read,
> gmbus_mmio_write);
> - MMIO_F(PCH_GPIOA, 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
> + MMIO_F(_MMIO(PCH_GPIO_BASE), 6 * 4, F_UNALIGN, 0, 0, D_ALL, NULL, NULL);
> MMIO_F(_MMIO(0xe4f00), 0x28, 0, 0, 0, D_ALL, NULL, NULL);
>
> MMIO_F(_MMIO(_PCH_DPB_AUX_CH_CTL), 6 * 4, 0, 0, 0, D_PRE_SKL, NULL,
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 0424e45f88db..f8f71d577613 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3088,18 +3088,11 @@ enum i915_power_well_id {
> /*
> * GPIO regs
> */
> -#define GPIOA _MMIO(0x5010)
> -#define GPIOB _MMIO(0x5014)
> -#define GPIOC _MMIO(0x5018)
> -#define GPIOD _MMIO(0x501c)
> -#define GPIOE _MMIO(0x5020)
> -#define GPIOF _MMIO(0x5024)
> -#define GPIOG _MMIO(0x5028)
> -#define GPIOH _MMIO(0x502c)
> -#define GPIOJ _MMIO(0x5034)
> -#define GPIOK _MMIO(0x5038)
> -#define GPIOL _MMIO(0x503C)
> -#define GPIOM _MMIO(0x5040)
> +#define GPIO_OFFSET 0x5010u
> +#define PCH_GPIO_BASE (0xc0000u + GPIO_OFFSET)
> +#define VLV_GPIO_BASE (VLV_DISPLAY_BASE + GPIO_OFFSET)
This is a rather peculiar choice of baseline address. I'd either go with
0x5000u or 0x0000u (which avoids the need to change all the gmbus macros).
Only needs a slight adjustment to your GPIO macro, but avoids the rather
onerous - GPIO_OFFSET + GMBUS_OFFSET you have below. That one kinda
indicates your offset is all confused.
Anyway, just a drive-by comment, I was looking for some other gmbus patch.
-Daniel
> +#define GPIO(gpio) _MMIO(dev_priv->gpio_mmio_base + 4 * (gpio))
> +
> # define GPIO_CLOCK_DIR_MASK (1 << 0)
> # define GPIO_CLOCK_DIR_IN (0 << 1)
> # define GPIO_CLOCK_DIR_OUT (1 << 1)
> @@ -3115,7 +3108,11 @@ enum i915_power_well_id {
> # define GPIO_DATA_VAL_IN (1 << 12)
> # define GPIO_DATA_PULLUP_DISABLE (1 << 13)
>
> -#define GMBUS0 _MMIO(dev_priv->gpio_mmio_base + 0x5100) /* clock/port select */
> +#define GMBUS_OFFSET 0x5100u
> +
> +/* clock/port select */
> +#define GMBUS0 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET)
> #define GMBUS_AKSV_SELECT (1 << 11)
> #define GMBUS_RATE_100KHZ (0 << 8)
> #define GMBUS_RATE_50KHZ (1 << 8)
> @@ -3141,7 +3138,10 @@ enum i915_power_well_id {
> #define GMBUS_PIN_12_TC4_ICP 12
>
> #define GMBUS_NUM_PINS 13 /* including 0 */
> -#define GMBUS1 _MMIO(dev_priv->gpio_mmio_base + 0x5104) /* command/status */
> +
> +/* command/status */
> +#define GMBUS1 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET + 0x4)
> #define GMBUS_SW_CLR_INT (1 << 31)
> #define GMBUS_SW_RDY (1 << 30)
> #define GMBUS_ENT (1 << 29) /* enable timeout */
> @@ -3155,7 +3155,10 @@ enum i915_power_well_id {
> #define GMBUS_SLAVE_ADDR_SHIFT 1
> #define GMBUS_SLAVE_READ (1 << 0)
> #define GMBUS_SLAVE_WRITE (0 << 0)
> -#define GMBUS2 _MMIO(dev_priv->gpio_mmio_base + 0x5108) /* status */
> +
> +/* status */
> +#define GMBUS2 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET + 0x8)
> #define GMBUS_INUSE (1 << 15)
> #define GMBUS_HW_WAIT_PHASE (1 << 14)
> #define GMBUS_STALL_TIMEOUT (1 << 13)
> @@ -3163,14 +3166,21 @@ enum i915_power_well_id {
> #define GMBUS_HW_RDY (1 << 11)
> #define GMBUS_SATOER (1 << 10)
> #define GMBUS_ACTIVE (1 << 9)
> -#define GMBUS3 _MMIO(dev_priv->gpio_mmio_base + 0x510c) /* data buffer bytes 3-0 */
> -#define GMBUS4 _MMIO(dev_priv->gpio_mmio_base + 0x5110) /* interrupt mask (Pineview+) */
> +
> +/* data buffer bytes 3-0 */
> +#define GMBUS3 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET + 0xc)
> +/* interrupt mask (Pineview+) */
> +#define GMBUS4 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET + 0x10)
> #define GMBUS_SLAVE_TIMEOUT_EN (1 << 4)
> #define GMBUS_NAK_EN (1 << 3)
> #define GMBUS_IDLE_EN (1 << 2)
> #define GMBUS_HW_WAIT_EN (1 << 1)
> #define GMBUS_HW_RDY_EN (1 << 0)
> -#define GMBUS5 _MMIO(dev_priv->gpio_mmio_base + 0x5120) /* byte index */
> +/* byte index */
> +#define GMBUS5 _MMIO(dev_priv->gpio_mmio_base - GPIO_OFFSET \
> + + GMBUS_OFFSET + 0x20)
> #define GMBUS_2BYTE_INDEX_EN (1 << 31)
>
> /*
> @@ -7668,13 +7678,6 @@ enum {
> #define ICP_TC_HPD_LONG_DETECT(tc_port) (2 << (tc_port) * 4)
> #define ICP_TC_HPD_SHORT_DETECT(tc_port) (1 << (tc_port) * 4)
>
> -#define PCH_GPIOA _MMIO(0xc5010)
> -#define PCH_GPIOB _MMIO(0xc5014)
> -#define PCH_GPIOC _MMIO(0xc5018)
> -#define PCH_GPIOD _MMIO(0xc501c)
> -#define PCH_GPIOE _MMIO(0xc5020)
> -#define PCH_GPIOF _MMIO(0xc5024)
> -
> #define PCH_GMBUS0 _MMIO(0xc5100)
> #define PCH_GMBUS1 _MMIO(0xc5104)
> #define PCH_GMBUS2 _MMIO(0xc5108)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 61e715ddd0d5..dedf87c58a95 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -152,6 +152,22 @@
> * Display related stuff
> */
>
> +enum i915_gpio {
> + GPIOA = 0,
> + GPIOB,
> + GPIOC,
> + GPIOD,
> + GPIOE,
> + GPIOF,
> + GPIOG,
> + GPIOH,
> + __GPIOI_UNUSED,
> + GPIOJ,
> + GPIOK,
> + GPIOL,
> + GPIOM,
> +};
> +
> /* store information about an Ixxx DVO */
> /* The i830->i865 use multiple DVOs with multiple i2cs */
> /* the i915, i945 have a single sDVO i2c bus - which is different */
> diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
> index 97606c1be70d..f1c0b974daa6 100644
> --- a/drivers/gpu/drm/i915/intel_i2c.c
> +++ b/drivers/gpu/drm/i915/intel_i2c.c
> @@ -37,7 +37,7 @@
>
> struct gmbus_pin {
> const char *name;
> - i915_reg_t reg;
> + enum i915_gpio gpio;
> };
>
> /* Map gmbus pin pairs to names and registers. */
> @@ -121,8 +121,7 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
> else
> size = ARRAY_SIZE(gmbus_pins);
>
> - return pin < size &&
> - i915_mmio_reg_valid(get_gmbus_pin(dev_priv, pin)->reg);
> + return pin < size && get_gmbus_pin(dev_priv, pin)->name;
> }
>
> /* Intel GPIO access functions */
> @@ -292,8 +291,7 @@ intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
>
> algo = &bus->bit_algo;
>
> - bus->gpio_reg = _MMIO(dev_priv->gpio_mmio_base +
> - i915_mmio_reg_offset(get_gmbus_pin(dev_priv, pin)->reg));
> + bus->gpio_reg = GPIO(get_gmbus_pin(dev_priv, pin)->gpio);
> bus->adapter.algo_data = algo;
> algo->setsda = set_data;
> algo->setscl = set_clock;
> @@ -775,11 +773,11 @@ int intel_setup_gmbus(struct drm_i915_private *dev_priv)
> return 0;
>
> if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> - dev_priv->gpio_mmio_base = VLV_DISPLAY_BASE;
> + dev_priv->gpio_mmio_base = VLV_GPIO_BASE;
> else if (!HAS_GMCH_DISPLAY(dev_priv))
> - dev_priv->gpio_mmio_base =
> - i915_mmio_reg_offset(PCH_GPIOA) -
> - i915_mmio_reg_offset(GPIOA);
> + dev_priv->gpio_mmio_base = PCH_GPIO_BASE;
> + else
> + dev_priv->gpio_mmio_base = GPIO_OFFSET;
>
> mutex_init(&dev_priv->gmbus_mutex);
> init_waitqueue_head(&dev_priv->gmbus_wait_queue);
> --
> 2.17.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
