Re: [PATCH 3/8] drm/i915: Rewrite mst suspend/resume in terms of encoders

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 06, 2018 at 01:42:35PM +0300, Ville Syrjälä wrote:
> On Thu, Jul 05, 2018 at 02:29:59PM -0700, Rodrigo Vivi wrote:
> > On Thu, Jul 05, 2018 at 07:43:52PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > 
> > > Rather than looping over all the ports and picking the encoder based on
> > > the port, let's just loop over all the encoders instead. Gets rid of
> > > some irq_port[] usage, which is a bit of an eye sore.
> > > 
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/i915_drv.c  |  4 ++--
> > >  drivers/gpu/drm/i915/intel_dp.c  | 41 +++++++++++++++++++++++-----------------
> > >  drivers/gpu/drm/i915/intel_drv.h |  4 ++--
> > >  3 files changed, 28 insertions(+), 21 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> > > index 0db3c83cce29..1f2449d9206d 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.c
> > > +++ b/drivers/gpu/drm/i915/i915_drv.c
> > > @@ -1577,7 +1577,7 @@ static int i915_drm_suspend(struct drm_device *dev)
> > >  
> > >  	intel_display_suspend(dev);
> > >  
> > > -	intel_dp_mst_suspend(dev);
> > > +	intel_dp_mst_suspend(dev_priv);
> > >  
> > >  	intel_runtime_pm_disable_interrupts(dev_priv);
> > >  	intel_hpd_cancel_work(dev_priv);
> > > @@ -1742,7 +1742,7 @@ static int i915_drm_resume(struct drm_device *dev)
> > >  		dev_priv->display.hpd_irq_setup(dev_priv);
> > >  	spin_unlock_irq(&dev_priv->irq_lock);
> > >  
> > > -	intel_dp_mst_resume(dev);
> > > +	intel_dp_mst_resume(dev_priv);
> > >  
> > >  	intel_display_resume(dev);
> > >  
> > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > > index e95f1181e302..e9bc0f9f5e54 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > > @@ -6490,37 +6490,44 @@ bool intel_dp_init(struct drm_i915_private *dev_priv,
> > >  	return false;
> > >  }
> > >  
> > > -void intel_dp_mst_suspend(struct drm_device *dev)
> > > +void intel_dp_mst_suspend(struct drm_i915_private *dev_priv)
> > >  {
> > > -	struct drm_i915_private *dev_priv = to_i915(dev);
> > > -	int i;
> > > +	struct intel_encoder *encoder;
> > > +
> > > +	for_each_intel_encoder(&dev_priv->drm, encoder) {
> > > +		struct intel_dp *intel_dp;
> > > +
> > > +		if (encoder->type != INTEL_OUTPUT_DDI)
> > 
> > INTEL_OUTPUT_DP not possible at this point?
> 
> No MST on pre-DDI platforms, and encoder->type for DDI platforms is
> either DDI or EDP but never DP.

Oh! indeed, thanks

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>


> 
> > 
> > > +			continue;
> > >  
> > > -	/* disable MST */
> > > -	for (i = 0; i < I915_MAX_PORTS; i++) {
> > > -		struct intel_digital_port *intel_dig_port = dev_priv->hotplug.irq_port[i];
> > > +		intel_dp = enc_to_intel_dp(&encoder->base);
> > >  
> > > -		if (!intel_dig_port || !intel_dig_port->dp.can_mst)
> > > +		if (!intel_dp->can_mst)
> > >  			continue;
> > >  
> > > -		if (intel_dig_port->dp.is_mst)
> > > -			drm_dp_mst_topology_mgr_suspend(&intel_dig_port->dp.mst_mgr);
> > > +		if (intel_dp->is_mst)
> > > +			drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr);
> > >  	}
> > >  }
> > >  
> > > -void intel_dp_mst_resume(struct drm_device *dev)
> > > +void intel_dp_mst_resume(struct drm_i915_private *dev_priv)
> > >  {
> > > -	struct drm_i915_private *dev_priv = to_i915(dev);
> > > -	int i;
> > > +	struct intel_encoder *encoder;
> > >  
> > > -	for (i = 0; i < I915_MAX_PORTS; i++) {
> > > -		struct intel_digital_port *intel_dig_port = dev_priv->hotplug.irq_port[i];
> > > +	for_each_intel_encoder(&dev_priv->drm, encoder) {
> > > +		struct intel_dp *intel_dp;
> > >  		int ret;
> > >  
> > > -		if (!intel_dig_port || !intel_dig_port->dp.can_mst)
> > > +		if (encoder->type != INTEL_OUTPUT_DDI)
> > > +			continue;
> > > +
> > > +		intel_dp = enc_to_intel_dp(&encoder->base);
> > > +
> > > +		if (!intel_dp->can_mst)
> > >  			continue;
> > >  
> > > -		ret = drm_dp_mst_topology_mgr_resume(&intel_dig_port->dp.mst_mgr);
> > > +		ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr);
> > >  		if (ret)
> > > -			intel_dp_check_mst_status(&intel_dig_port->dp);
> > > +			intel_dp_check_mst_status(intel_dp);
> > >  	}
> > >  }
> > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > > index 077189ed9e46..dc11106b2081 100644
> > > --- a/drivers/gpu/drm/i915/intel_drv.h
> > > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > > @@ -1700,8 +1700,8 @@ void intel_edp_backlight_off(const struct drm_connector_state *conn_state);
> > >  void intel_edp_panel_vdd_on(struct intel_dp *intel_dp);
> > >  void intel_edp_panel_on(struct intel_dp *intel_dp);
> > >  void intel_edp_panel_off(struct intel_dp *intel_dp);
> > > -void intel_dp_mst_suspend(struct drm_device *dev);
> > > -void intel_dp_mst_resume(struct drm_device *dev);
> > > +void intel_dp_mst_suspend(struct drm_i915_private *dev_priv);
> > > +void intel_dp_mst_resume(struct drm_i915_private *dev_priv);
> > >  int intel_dp_max_link_rate(struct intel_dp *intel_dp);
> > >  int intel_dp_max_lane_count(struct intel_dp *intel_dp);
> > >  int intel_dp_rate_select(struct intel_dp *intel_dp, int rate);
> > > -- 
> > > 2.16.4
> > > 
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux