On Tue, 2018-06-26 at 10:26 +0200, Daniel Vetter wrote:
> On Mon, Jun 25, 2018 at 10:57:23PM -0700, Tarun Vyas wrote:
> >
> > This is a lockless version of the exisiting psr_wait_for_idle().
> > We want to wait for PSR to idle out inside intel_pipe_update_start.
> > At the time of a pipe update, we should never race with any psr
> > enable or disable code, which is a part of crtc enable/disable. So,
> > we can live w/o taking any psr locks at all.
> > The follow up patch will use this lockless wait inside pipe_update_
> > start to wait for PSR to idle out before checking for vblank
> > evasion.
> What's the upside of the lockless wait? The patch seems to be
> entirely
> missing the motivation for the change. "Make it lockless" isn't a
> good
> justification on itself, there needs to be data about overhead or
> stalls
> included if that's the reason for doing this change.
>
Acquiring the PSR mutex means potential stalls due to PSR work having
already acquired it. The idea was to keep PSR changes in
pipe_update_start() less invasive latency wise.
But yeah, the commit has to add the explanation.
> >
> > Even if psr is never enabled, psr2_enabled will be false and this
> > function will wait for PSR1 to idle out, which should just return
> > immediately, so a very short (~1-2 usec) wait for cases where PSR
> > is disabled.
> >
> > v2: Add comment to explain the 25msec timeout (DK)
> >
> > v3: Rename psr_wait_for_idle to __psr_wait_for_idle_locked to avoid
> > naming conflicts and propagate err (if any) to the caller
> > (Chris)
> >
> > v5: Form a series with the next patch
> >
> > Signed-off-by: Tarun Vyas <tarun.vyas@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_drv.h | 1 +
> > drivers/gpu/drm/i915/intel_psr.c | 25 +++++++++++++++++++++++--
> > 2 files changed, 24 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index 578346b8d7e2..9cb2b8afdd3e 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1920,6 +1920,7 @@ void intel_psr_compute_config(struct intel_dp
> > *intel_dp,
> > struct intel_crtc_state
> > *crtc_state);
> > void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool
> > debug);
> > void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32
> > psr_iir);
> > +int intel_psr_wait_for_idle(struct drm_i915_private *dev_priv);
> >
> > /* intel_runtime_pm.c */
> > int intel_power_domains_init(struct drm_i915_private *);
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > b/drivers/gpu/drm/i915/intel_psr.c
> > index aea81ace854b..41e6962923ae 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -757,7 +757,28 @@ void intel_psr_disable(struct intel_dp
> > *intel_dp,
> > cancel_work_sync(&dev_priv->psr.work);
> > }
> >
> > -static bool psr_wait_for_idle(struct drm_i915_private *dev_priv)
> > +int intel_psr_wait_for_idle(struct drm_i915_private *dev_priv)
> > +{
> > + i915_reg_t reg;
> > + u32 mask;
> > +
> I think a comment here explaining why the lockless access is correct
> is
> justified here.
>
> >
> > + if (dev_priv->psr.psr2_enabled) {
> > + reg = EDP_PSR2_STATUS;
> > + mask = EDP_PSR2_STATUS_STATE_MASK;
> > + } else {
> > + reg = EDP_PSR_STATUS;
> > + mask = EDP_PSR_STATUS_STATE_MASK;
> > + }
> > +
> > + /*
> > + * The 25 msec timeout accounts for a frame @ 60Hz
> > refresh rate,
> > + * exit training an aux handshake time.
> > + */
> So this goes boom if the panel is running at e.g. 50Hz? Please either
> calculate this from the current mode (but that's a bit tricky, due to
> DRRS), or go with a more defensive timeout. Also small typo,
> s/an/and/.
>
> Would also be good to have numbers for the exit training/aux
> handshake
> time.
bspec says exit should be compelete in "one full frame time (1/refresh
rate), plus SRD exit training time (max of 6ms), plus SRD aux channel
handshake (max of 1.5ms)."
> -Daniel
>
> >
> > + return intel_wait_for_register(dev_priv, reg, mask,
> > + EDP_PSR_STATUS_STATE_IDLE,
> > 25);
> > +}
> > +
> > +static bool __psr_wait_for_idle_locked(struct drm_i915_private
> > *dev_priv)
> > {
> > struct intel_dp *intel_dp;
> > i915_reg_t reg;
> > @@ -803,7 +824,7 @@ static void intel_psr_work(struct work_struct
> > *work)
> > * PSR might take some time to get fully disabled
> > * and be ready for re-enable.
> > */
> > - if (!psr_wait_for_idle(dev_priv))
> > + if (!__psr_wait_for_idle_locked(dev_priv))
> > goto unlock;
> >
> > /*
> > --
> > 2.13.5
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
