Em Qua, 2018-06-13 às 13:15 -0700, Manasi Navare escreveu:
> On Wed, Jun 13, 2018 at 12:42:20PM -0700, Paulo Zanoni wrote:
> > Em Ter, 2018-06-12 às 11:37 -0700, Manasi Navare escreveu:
> > > On Tue, Jun 12, 2018 at 03:15:53PM +0300, Ville Syrjälä wrote:
> > > > On Mon, Jun 11, 2018 at 03:26:54PM -0700, Paulo Zanoni wrote:
> > > > > From: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > > > >
> > > > > For ICL, on Combo PHY the allowed max rates are:
> > > > > - HBR3 8.1 eDP (DDIA)
> > > > > - HBR2 5.4 DisplayPort (DDIB)
> > > > > and for MG PHY/TC DDI Ports allowed DP rates are:
> > > > > - HBR3 8.1 DisplayPort (DP alternate mode, DP over TBT,
> > > > > - DP on legacy connector - DDIC/D/E/F)
> > > > >
> > > > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > > > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> > > > > Reviewed-by: James Ausmus <james.ausmus@xxxxxxxxx>
> > > > > Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > > > > Signed-off-by: James Ausmus <james.ausmus@xxxxxxxxx>
> > > > > [Paulo: bikeshed to keep future platforms on "else".]
> > > > > Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> > > > > ---
> > > > > drivers/gpu/drm/i915/intel_dp.c | 21 +++++++++++++++++++--
> > > > > 1 file changed, 19 insertions(+), 2 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > > > > b/drivers/gpu/drm/i915/intel_dp.c
> > > > > index 37b9f62aeb6e..8371159cc192 100644
> > > > > --- a/drivers/gpu/drm/i915/intel_dp.c
> > > > > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > > > > @@ -256,6 +256,20 @@ static int cnl_max_source_rate(struct
> > > > > intel_dp *intel_dp)
> > > > > return 810000;
> > > > > }
> > > > >
> > > > > +static int icl_max_source_rate(struct intel_dp *intel_dp)
> > > > > +{
> > > > > + struct intel_digital_port *dig_port =
> > > > > dp_to_dig_port(intel_dp);
> > > > > + enum port port = dig_port->base.port;
> > > > > +
> > > > > + /* On Combo PHY port A max speed is HBR3 for all
> > > > > Vccio
> > > > > voltages
> > > > > + * and on Combo PHY Port B the maximum supported is
> > > > > HBR2.
> > > > > + */
> > > >
> > > > And what about the other ports? If port B is the only
> > > > exception why are we even discussing port A specifically
> > > > here?
> > >
> > > All the MG PHY ports (C/D/E/F) support a max of HBR3 that is
> > > 810000
> > > but for
> > > Combo PHY ports which is Port A or B, HBR3 only supported for
> > > Port A
> > > but for Port B it is max of HBR2 which is 540000 hence the
> > > comment
> > > for Combo PHY
> > > ports and if port B then just return HBR2
> >
> > I think Ville's point was that having a comment that only discusses
> > ports A and B on code that handles all ports gives the impression
> > that
> > perhaps the code is "forgetting" to consider the other ports, or
> > something like that. Which makes sense to me.
> >
> > Perhaps to address this issue we could either reword the comment to
> > include C-F or simply just remove it, since the commit message
> > should
> > be enough and the comment only says what the code says.
> >
>
> Yes I agree. Lets remove the comment in the code since the commit
> message
> covers that part.
> Should I send a new revision for this with comment removed?
Feel free to do it, otherwise I can do it while applying since it's a
trivial change.
Thanks,
Paulo
>
> Manasi
>
> > >
> > > Manasi
> > >
> > > >
> > > > > + if (port == PORT_B)
> > > > > + return 540000;
> > > > > +
> > > > > + return 810000;
> > > > > +}
> > > > > +
> > > > > static void
> > > > > intel_dp_set_source_rates(struct intel_dp *intel_dp)
> > > > > {
> > > > > @@ -285,10 +299,13 @@ intel_dp_set_source_rates(struct
> > > > > intel_dp
> > > > > *intel_dp)
> > > > > /* This should only be done once */
> > > > > WARN_ON(intel_dp->source_rates || intel_dp-
> > > > > > num_source_rates);
> > > > >
> > > > >
> > > > > - if (IS_CANNONLAKE(dev_priv)) {
> > > > > + if (INTEL_GEN(dev_priv) >= 10) {
> > > > > source_rates = cnl_rates;
> > > > > size = ARRAY_SIZE(cnl_rates);
> > > > > - max_rate = cnl_max_source_rate(intel_dp);
> > > > > + if (INTEL_GEN(dev_priv) == 10)
> > > > > + max_rate =
> > > > > cnl_max_source_rate(intel_dp);
> > > > > + else
> > > > > + max_rate =
> > > > > icl_max_source_rate(intel_dp);
> > > > > } else if (IS_GEN9_LP(dev_priv)) {
> > > > > source_rates = bxt_rates;
> > > > > size = ARRAY_SIZE(bxt_rates);
> > > > > --
> > > > > 2.14.4
> > > > >
> > > > > _______________________________________________
> > > > > Intel-gfx mailing list
> > > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > >
> > > > --
> > > > Ville Syrjälä
> > > > Intel
> > > > _______________________________________________
> > > > Intel-gfx mailing list
> > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > >
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
