On 18/05/2018 10:47, Chris Wilson wrote:
Quoting Tvrtko Ursulin (2018-05-18 10:33:44)
On 17/05/2018 15:24, Chris Wilson wrote:
Inside the live_hangcheck (reset) selftests, we occasionally see
failures like
<7>[ 239.094840] i915_gem_set_wedged rcs0
<7>[ 239.094843] i915_gem_set_wedged current seqno 19a98, last 19a9a, hangcheck 0 [5158 ms]
<7>[ 239.094846] i915_gem_set_wedged Reset count: 6239 (global 1)
<7>[ 239.094848] i915_gem_set_wedged Requests:
<7>[ 239.095052] i915_gem_set_wedged first 19a99 [e8c:5f] prio=1024 @ 5159ms: (null)
<7>[ 239.095056] i915_gem_set_wedged last 19a9a [e81:1a] prio=139 @ 5159ms: igt/rcs0[5977]/1
<7>[ 239.095059] i915_gem_set_wedged active 19a99 [e8c:5f] prio=1024 @ 5159ms: (null)
<7>[ 239.095062] i915_gem_set_wedged [head 0220, postfix 0280, tail 02a8, batch 0xffffffff_ffffffff]
<7>[ 239.100050] i915_gem_set_wedged ring->start: 0x00283000
<7>[ 239.100053] i915_gem_set_wedged ring->head: 0x000001f8
<7>[ 239.100055] i915_gem_set_wedged ring->tail: 0x000002a8
<7>[ 239.100057] i915_gem_set_wedged ring->emit: 0x000002a8
<7>[ 239.100059] i915_gem_set_wedged ring->space: 0x00000f10
<7>[ 239.100085] i915_gem_set_wedged RING_START: 0x00283000
<7>[ 239.100088] i915_gem_set_wedged RING_HEAD: 0x00000260
<7>[ 239.100091] i915_gem_set_wedged RING_TAIL: 0x000002a8
<7>[ 239.100094] i915_gem_set_wedged RING_CTL: 0x00000001
<7>[ 239.100097] i915_gem_set_wedged RING_MODE: 0x00000300 [idle]
<7>[ 239.100100] i915_gem_set_wedged RING_IMR: fffffefe
<7>[ 239.100104] i915_gem_set_wedged ACTHD: 0x00000000_0000609c
<7>[ 239.100108] i915_gem_set_wedged BBADDR: 0x00000000_0000609d
<7>[ 239.100111] i915_gem_set_wedged DMA_FADDR: 0x00000000_00283260
<7>[ 239.100114] i915_gem_set_wedged IPEIR: 0x00000000
<7>[ 239.100117] i915_gem_set_wedged IPEHR: 0x02800000
<7>[ 239.100120] i915_gem_set_wedged Execlist status: 0x00044052 00000002
<7>[ 239.100124] i915_gem_set_wedged Execlist CSB read 5 [5 cached], write 5 [5 from hws], interrupt posted? no, tasklet queued? no (enabled)
<7>[ 239.100128] i915_gem_set_wedged ELSP[0] count=1, ring->start=00283000, rq: 19a99 [e8c:5f] prio=1024 @ 5164ms: (null)
<7>[ 239.100132] i915_gem_set_wedged ELSP[1] count=1, ring->start=00257000, rq: 19a9a [e81:1a] prio=139 @ 5164ms: igt/rcs0[5977]/1
<7>[ 239.100135] i915_gem_set_wedged HW active? 0x5
<7>[ 239.100250] i915_gem_set_wedged E 19a99 [e8c:5f] prio=1024 @ 5164ms: (null)
<7>[ 239.100338] i915_gem_set_wedged E 19a9a [e81:1a] prio=139 @ 5164ms: igt/rcs0[5977]/1
<7>[ 239.100340] i915_gem_set_wedged Queue priority: 139
<7>[ 239.100343] i915_gem_set_wedged Q 0 [e98:19] prio=132 @ 5164ms: igt/rcs0[5977]/8
<7>[ 239.100346] i915_gem_set_wedged Q 0 [e84:19] prio=121 @ 5165ms: igt/rcs0[5977]/2
<7>[ 239.100349] i915_gem_set_wedged Q 0 [e87:19] prio=82 @ 5165ms: igt/rcs0[5977]/3
<7>[ 239.100352] i915_gem_set_wedged Q 0 [e84:1a] prio=44 @ 5164ms: igt/rcs0[5977]/2
<7>[ 239.100356] i915_gem_set_wedged Q 0 [e8b:19] prio=20 @ 5165ms: igt/rcs0[5977]/4
<7>[ 239.100362] i915_gem_set_wedged drv_selftest [5894] waiting for 19a99
where the GPU saw an arbitration point and idles; AND HAS NOT BEEN RESET!
The RING_MODE indicates that is idle and has the STOP_RING bit set, so
try clearing it.
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_uncore.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_uncore.c b/drivers/gpu/drm/i915/intel_uncore.c
index b36a3b5736a0..082b0045ac8c 100644
--- a/drivers/gpu/drm/i915/intel_uncore.c
+++ b/drivers/gpu/drm/i915/intel_uncore.c
@@ -1720,6 +1720,8 @@ static void gen3_stop_engine(struct intel_engine_cs *engine)
if (I915_READ_FW(RING_HEAD(base)) != 0)
DRM_DEBUG_DRIVER("%s: ring head not parked\n",
engine->name);
+
+ I915_WRITE_FW(RING_MI_MODE(base), _MASKED_BIT_DISABLE(STOP_RING));
}
static void i915_stop_engines(struct drm_i915_private *dev_priv,
Right, so expectation is after reset STOP_RING will not be set, but it
sometimes is?
Yes.
Also there is a comment in there which says engine must be stopped
before reset on some platforms. So shouldn't the manual attempt to
unstuck it go after the reset and not in gen3_stop_engine?
Like the suggested i915_check_engine_running:
if (stopped) {
DRM_NOTICE(Manually starting engine after reset);
clear_stop_ring;
}
?
Should we also add a notice or info if it is set in intel_gpu_reset,
after the reset is called? Could add i915_check_engine_running(..)
helper or something.
Could do, will be any more useful than the dump we give above? ;)
Might be interesting to do the dump on unusual state on takeover just
for reference in later fails.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
