On Wed, Apr 25, 2018 at 02:23:32PM -0700, José Roberto de Souza wrote:
> This will be helpful to debug what hardware is actually tracking
> and causing PSR to exit.
>
> BSpec: 7721
>
> v4:
> - Using _MMIO_TRANS2() in PSR_EVENT
> - Cleaning events before printing
>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 23 ++++++++++++++++
> drivers/gpu/drm/i915/intel_psr.c | 45 ++++++++++++++++++++++++++++++++
> 2 files changed, 68 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 2dad655a710c..391825ae2361 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4095,6 +4095,29 @@ enum {
> #define EDP_PSR2_IDLE_FRAME_MASK 0xf
> #define EDP_PSR2_IDLE_FRAME_SHIFT 0
>
> +#define _PSR_EVENT_TRANS_A 0x60848
> +#define _PSR_EVENT_TRANS_B 0x61848
> +#define _PSR_EVENT_TRANS_C 0x62848
> +#define _PSR_EVENT_TRANS_D 0x63848
> +#define _PSR_EVENT_TRANS_EDP 0x6F848
> +#define PSR_EVENT(trans) _MMIO_TRANS2(trans, _PSR_EVENT_TRANS_A)
> +#define PSR_EVENT_PSR2_WD_TIMER_EXPIRE (1 << 17)
> +#define PSR_EVENT_PSR2_DISABLED (1 << 16)
> +#define PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN (1 << 15)
> +#define PSR_EVENT_SU_CRC_FIFO_UNDERRUN (1 << 14)
> +#define PSR_EVENT_GRAPHICS_RESET (1 << 12)
> +#define PSR_EVENT_PCH_INTERRUPT (1 << 11)
> +#define PSR_EVENT_MEMORY_UP (1 << 10)
> +#define PSR_EVENT_FRONT_BUFFER_MODIFY (1 << 9)
> +#define PSR_EVENT_WD_TIMER_EXPIRE (1 << 8)
> +#define PSR_EVENT_PIPE_REGISTERS_UPDATE (1 << 6)
> +#define PSR_EVENT_REGISTER_UPDATE (1 << 5)
> +#define PSR_EVENT_HDCP_ENABLE (1 << 4)
> +#define PSR_EVENT_KVMR_SESSION_ENABLE (1 << 3)
> +#define PSR_EVENT_VBI_ENABLE (1 << 2)
> +#define PSR_EVENT_LPSP_MODE_EXIT (1 << 1)
> +#define PSR_EVENT_PSR_DISABLE (1 << 0)
> +
> #define EDP_PSR2_STATUS _MMIO(0x6f940)
> #define EDP_PSR2_STATUS_STATE_MASK (0xf<<28)
> #define EDP_PSR2_STATUS_STATE_SHIFT 28
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index e35a3b94fa69..c8d5cdce544f 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -125,6 +125,43 @@ void intel_psr_irq_control(struct drm_i915_private *dev_priv, bool debug)
> I915_WRITE(EDP_PSR_IMR, ~mask);
> }
>
> +static void psr_event_print(u32 val, bool psr2_enabled)
> +{
> + DRM_DEBUG_KMS("PSR exit events: 0x%x\n", val);
> + if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE)
> + DRM_DEBUG_KMS("\tPSR2 watchdog timer expired\n");
> + if ((val & PSR_EVENT_PSR2_DISABLED) && psr2_enabled)
I'm not sure if we should add this extra psr2_enable check here.
Probably better to just print the bit reference and move one.
otherwise we might have the risk of having a message
"PSR exit events:"
followed by nothing below it
> + DRM_DEBUG_KMS("\tPSR2 disabled\n");
> + if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN)
> + DRM_DEBUG_KMS("\tSU dirty FIFO underrun\n");
> + if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN)
> + DRM_DEBUG_KMS("\tSU CRC FIFO underrun\n");
> + if (val & PSR_EVENT_GRAPHICS_RESET)
> + DRM_DEBUG_KMS("\tGraphics reset\n");
> + if (val & PSR_EVENT_PCH_INTERRUPT)
> + DRM_DEBUG_KMS("\tPCH interrupt\n");
> + if (val & PSR_EVENT_MEMORY_UP)
> + DRM_DEBUG_KMS("\tMemory up\n");
> + if (val & PSR_EVENT_FRONT_BUFFER_MODIFY)
> + DRM_DEBUG_KMS("\tFront buffer modification\n");
> + if (val & PSR_EVENT_WD_TIMER_EXPIRE)
> + DRM_DEBUG_KMS("\tPSR watchdog timer expired\n");
> + if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE)
> + DRM_DEBUG_KMS("\tPIPE registers updated\n");
> + if (val & PSR_EVENT_REGISTER_UPDATE)
> + DRM_DEBUG_KMS("\tRegister updated\n");
> + if (val & PSR_EVENT_HDCP_ENABLE)
> + DRM_DEBUG_KMS("\tHDCP enabled\n");
> + if (val & PSR_EVENT_KVMR_SESSION_ENABLE)
> + DRM_DEBUG_KMS("\tKVMR session enabled\n");
> + if (val & PSR_EVENT_VBI_ENABLE)
> + DRM_DEBUG_KMS("\tVBI enabled\n");
> + if (val & PSR_EVENT_LPSP_MODE_EXIT)
> + DRM_DEBUG_KMS("\tLPSP mode exited\n");
> + if ((val & PSR_EVENT_PSR_DISABLE) && !psr2_enabled)
> + DRM_DEBUG_KMS("\tPSR disabled\n");
> +}
> +
> void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
> {
> u32 transcoders = BIT(TRANSCODER_EDP);
> @@ -152,6 +189,14 @@ void intel_psr_irq_handler(struct drm_i915_private *dev_priv, u32 psr_iir)
> dev_priv->psr.last_exit = time_ns;
> DRM_DEBUG_KMS("[transcoder %s] PSR exit completed\n",
> transcoder_name(cpu_transcoder));
> +
> + if (INTEL_GEN(dev_priv) >= 9) {
> + u32 val = I915_READ(PSR_EVENT(cpu_transcoder));
> + bool psr2_enabled = dev_priv->psr.psr2_enabled;
> +
> + I915_WRITE(PSR_EVENT(cpu_transcoder), val);
writing the value back really clears it?
or should we clear by writting 0 to it?
> + psr_event_print(val, psr2_enabled);
> + }
> }
> }
> }
> --
> 2.17.0
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
