Support for Burst read in HW is added for HDCP2.2 compliance
requirement.
This patch enables the burst read for all the gmbus read of more than
511Bytes, on capable platforms.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_i2c.c | 39 +++++++++++++++++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4f583da0cee9..0ef162ee9ce0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2984,6 +2984,7 @@ enum i915_power_well_id {
#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */
#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */
#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */
+#define GMBUS_BYTE_CNT_OVERRIDE (1<<6)
#define GMBUS_PIN_DISABLED 0
#define GMBUS_PIN_SSC 1
#define GMBUS_PIN_VGADDC 2
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 7e92c7934657..ad65db6049c8 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -364,12 +364,24 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
static int
gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
unsigned short addr, u8 *buf, unsigned int len,
- u32 gmbus1_index)
+ u32 gmbus1_index, bool burst_read)
{
+ unsigned int bytes_af_override, size;
+
+ if (burst_read) {
+ bytes_af_override = len - (((len / 256) - 1) * 256);
+ size = bytes_af_override;
+
+ I915_WRITE_FW(GMBUS0, (I915_READ_FW(GMBUS0) |
+ GMBUS_BYTE_CNT_OVERRIDE));
+ } else {
+ size = len;
+ }
+
I915_WRITE_FW(GMBUS1,
gmbus1_index |
GMBUS_CYCLE_WAIT |
- (len << GMBUS_BYTE_COUNT_SHIFT) |
+ (size << GMBUS_BYTE_COUNT_SHIFT) |
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
while (len) {
@@ -385,11 +397,23 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
*buf++ = val & 0xff;
val >>= 8;
} while (--len && ++loop < 4);
+
+ if (burst_read && len == (bytes_af_override - 4))
+ I915_WRITE_FW(GMBUS0, (I915_READ_FW(GMBUS0) &
+ ~GMBUS_BYTE_CNT_OVERRIDE));
}
return 0;
}
+static bool gmbus_burst_read_supported(struct drm_i915_private *dev_priv)
+{
+ if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv) ||
+ IS_KABYLAKE(dev_priv))
+ return true;
+ return false;
+}
+
static int
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
u32 gmbus1_index)
@@ -398,15 +422,22 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
unsigned int rx_size = msg->len;
unsigned int len;
int ret;
+ bool burst_read = false;
+
+ if (rx_size > BXT_GMBUS_BYTE_COUNT_MAX)
+ burst_read = gmbus_burst_read_supported(dev_priv);
do {
- if (INTEL_GEN(dev_priv) >= 9)
+
+ if (burst_read)
+ len = rx_size;
+ else if (INTEL_GEN(dev_priv) >= 9)
len = min(rx_size, BXT_GMBUS_BYTE_COUNT_MAX);
else
len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
- buf, len, gmbus1_index);
+ buf, len, gmbus1_index, burst_read);
if (ret)
return ret;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
