Re: [PATCH 11/12] drm/i915/debugfs: Print information about what caused a PSR exit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2018-03-22 at 16:43 -0700, Pandiyan, Dhinakaran wrote:
> 
> 
> On Thu, 2018-03-22 at 16:27 -0700, Rodrigo Vivi wrote:
> > On Thu, Mar 22, 2018 at 02:48:47PM -0700, José Roberto de Souza
> > wrote:
> > > This will be helpful to debug what hardware is actually tracking.
> > > 
> > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/i915/i915_debugfs.c | 47
> > > +++++++++++++++++++++++++++++++++++++
> > >  drivers/gpu/drm/i915/i915_reg.h     | 18 ++++++++++++++
> > >  2 files changed, 65 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > > b/drivers/gpu/drm/i915/i915_debugfs.c
> > > index 0a0642c61cd0..3182e9a7cc5d 100644
> > > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > > @@ -2641,6 +2641,43 @@ static void
> > > psr_sink_last_received_psr_sdp_sprintf(struct seq_file *m, u32
> > > val)
> > >  		seq_puts(m, "\tY-Coordinate valid\n");
> > >  }
> > >  
> > > +static void psr_event_exit_sprintf(struct seq_file *m, u32 val,
> > > +				   bool psr2_enabled)
> > > +{
> > > +	if (val & EDP_PSR_EVENT_PSR2_WD_TIMER_EXPIRE)
> > > +		seq_puts(m, "\tPSR2 watchdog timer expired\n");
> > > +	if ((val & EDP_PSR_EVENT_PSR2_DISABLED) && psr2_enabled)
> > > +		seq_puts(m, "\tPSR2 disabled\n");
> > > +	if (val & EDP_PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN)
> > > +		seq_puts(m, "\tSU dirty FIFO underrun\n");
> > > +	if (val & EDP_PSR_EVENT_SU_CRC_FIFO_UNDERRUN)
> > > +		seq_puts(m, "\tSU CRC FIFO underrun\n");
> > > +	if (val & EDP_PSR_EVENT_GRAPHICS_RESET)
> > > +		seq_puts(m, "\tGraphics reset\n");
> > > +	if (val & EDP_PSR_EVENT_PCH_INTERRUPT)
> > > +		seq_puts(m, "\tPCH interrupt\n");
> > > +	if (val & EDP_PSR_EVENT_MEMORY_UP)
> > > +		seq_puts(m, "\tMemory up\n");
> > > +	if (val & EDP_PSR_EVENT_FRONT_BUFFER_MODIFY)
> > > +		seq_puts(m, "\tFront buffer modification\n");
> > > +	if (val & EDP_PSR_EVENT_WD_TIMER_EXPIRE)
> > > +		seq_puts(m, "\tPSR watchdog timer expired\n");
> > > +	if (val & EDP_PSR_EVENT_PIPE_REGISTERS_UPDATE)
> > > +		seq_puts(m, "\tPIPE registers updated\n");
> > > +	if (val & EDP_PSR_EVENT_REGISTER_UPDATE)
> > > +		seq_puts(m, "\tRegister update\n");
> > > +	if (val & EDP_PSR_EVENT_HDCP_ENABLE)
> > > +		seq_puts(m, "\tHDCP enabled\n");
> > > +	if (val & EDP_PSR_EVENT_KVMR_SESSION_ENABLE)
> > > +		seq_puts(m, "\tKVMR session enabled\n");
> > > +	if (val & EDP_PSR_EVENT_VBI_ENABLE)
> > > +		seq_puts(m, "\tVBI enabled\n");
> > > +	if (val & EDP_PSR_EVENT_LPSP_MODE_EXIT)
> > > +		seq_puts(m, "\tLPSP mode exited\n");
> > > +	if ((val & EDP_PSR_EVENT_PSR_DISABLE) && !psr2_enabled)
> > > +		seq_puts(m, "\tPSR disabled\n");
> > > +}
> > > +
> > >  static int i915_edp_psr_status(struct seq_file *m, void *data)
> > >  {
> > >  	struct drm_i915_private *dev_priv = node_to_i915(m-
> > > >private);
> > > @@ -2716,6 +2753,16 @@ static int i915_edp_psr_status(struct
> > > seq_file *m, void *data)
> > >  
> > >  		seq_printf(m, "Performance_Counter: %u\n",
> > > psrperf);
> > >  	}
> > > +
> > > +	if (INTEL_GEN(dev_priv) >= 9) {
> > > +		u32 val = I915_READ(EDP_PSR_EVENT);
> > 
> > What I'm afraid here is that this really shows the last event or
> > the first one after we cleared.
> > 
> 
> Both, the bits remain set unless cleared. I have plans of printing
> the
> events out of the PSR exit irq handler. This really was one of the
> main
> reasons to implement PSR interrupts. Since we get interrupt for each
> PSR
> exit, we'll also print out the correct event that caused exit.
> 

Exactly that, so should I drop this one?
Are you planning send a patch later showing the reasons in the debugfs?
This way we could improve and write new IGT tests.

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux