On 2/24/2018 4:23 AM, Manasi Navare wrote:
Thanks for the patches. I am working on the DSC support on i915 for eDP/DP
as well. Looking at the patches below, this is specific to VDSC enabling for eDP
panels and not for the external DP.
So please mention that specifically in the cover letter as well.
Since most of the VDSC functionality will be same across EDP and DP, i
mentioned DP in generic terms.
But no worries, i will mention EDP explicitly in the next patch set
while fixing the review comments.
On Fri, Feb 23, 2018 at 09:25:43PM +0530, Gaurav K Singh wrote:
Display manufacturers are turning to higher-resolution displays
to differentiate their products. The increased pixel counts have
required increased bandwidth over the links that drive these displays.
However, advances in physical layer technology have not kept up
with the increases in pixel counts.
These factors have created a need for compression on display links.
The Video Electronics Standards Association(VESA),in liaison with the
MIPI Alliance, has developed an industry standard Display Stream Compression(DSC)
for interoperable, visually lossless compression over display links.
These patches enable VDSC in i915 gfx driver for Gen9,Gen10 platforms
Please specify that this enables VDSC for eDp in i915 gfx driver.
Sure, will take care.
and provide basic code for future platforms.
Testing:
Did testing on GLK RVP. By default GLK RVP has non-DSC EDP panel, there was no regression with these patches.
BA Chrome Team (OTC) do not have EDP panel which supports DSC.
Trying to arrrage DSC EDP panel from other teams in BA, hopeful to get it in few weeks.
I do have a DSC eDP panel here in Oregon and can volunteer for testing your patches with that on GLK RVP.
Manasi
I am hopeful to get the panel sometime late next week. If i am not able
to get it, I would surely take your help to test my patches.
Dropping the patches to get the review started.
Gaurav K Singh (10):
drm: i915: Defining Compression Capabilities
drm: i915: Get DSC capability from DP sink
drm: i915: Enable/Disable DSC in DP sink
drm: i915: Compute RC & DSC parameters
drm: i915: Define Picture Parameter Set
drm/i915: Populate PPS Secondary Data Pkt for Sink
drm: i915: Define VDSC regs and DSC params
drm: i915: Enable VDSC in Source
drm: i915: Disable VDSC from Source
drm/i915: Encoder enable/disable seq wrt DSC
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/i915_drv.h | 589 ++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 451 ++++++++++++
drivers/gpu/drm/i915/intel_ddi.c | 4 +
drivers/gpu/drm/i915/intel_display.c | 20 +
drivers/gpu/drm/i915/intel_dp.c | 182 +++++
drivers/gpu/drm/i915/intel_drv.h | 64 ++
drivers/gpu/drm/i915/intel_vdsc.c | 1243 ++++++++++++++++++++++++++++++++++
include/drm/drm_dp_helper.h | 3 +
9 files changed, 2557 insertions(+)
create mode 100644 drivers/gpu/drm/i915/intel_vdsc.c
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
