On Wed, 14 Feb 2018, Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> wrote:
> Remove the kerneldoc markup applied to non-kerneldoc comments and
> convert the multiline comments to the canonical style.
>
> drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'encoder' not described in 'intel_enable_lvds'
> drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'pipe_config' not described in 'intel_enable_lvds'
> drivers/gpu/drm/i915/intel_lvds.c:313: warning: Function parameter or member 'conn_state' not described in 'intel_enable_lvds'
> drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'connector' not described in 'intel_lvds_detect'
> drivers/gpu/drm/i915/intel_lvds.c:453: warning: Function parameter or member 'force' not described in 'intel_lvds_detect'
> drivers/gpu/drm/i915/intel_lvds.c:471: warning: Function parameter or member 'connector' not described in 'intel_lvds_get_modes'
> drivers/gpu/drm/i915/intel_lvds.c:932: warning: Function parameter or member 'dev_priv' not described in 'intel_lvds_init'
> drivers/gpu/drm/i915/intel_lvds.c:932: warning: Excess function parameter 'dev' description in 'intel_lvds_init'
>
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_lvds.c | 42 +++++++++++++++++++++++++--------------
> 1 file changed, 27 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 4677ac0b10d7..d35d2d50f595 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -268,7 +268,9 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
> /* set the corresponsding LVDS_BORDER bit */
> temp &= ~LVDS_BORDER_ENABLE;
> temp |= pipe_config->gmch_pfit.lvds_border_bits;
> - /* Set the B0-B3 data pairs corresponding to whether we're going to
> +
> + /*
> + * Set the B0-B3 data pairs corresponding to whether we're going to
> * set the DPLLs for dual-channel mode or not.
> */
> if (lvds_encoder->is_dual_link)
> @@ -276,7 +278,8 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
> else
> temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
>
> - /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
> + /*
> + * It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
> * appropriately here, but we need to look more thoroughly into how
> * panels behave in the two modes. For now, let's just maintain the
> * value we got from the BIOS.
> @@ -284,12 +287,16 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
> temp &= ~LVDS_A3_POWER_MASK;
> temp |= lvds_encoder->a3_power;
>
> - /* Set the dithering flag on LVDS as needed, note that there is no
> + /*
> + * Set the dithering flag on LVDS as needed, note that there is no
> * special lvds dither control bit on pch-split platforms, dithering is
> - * only controlled through the PIPECONF reg. */
> + * only controlled through the PIPECONF reg.
> + */
> if (IS_GEN4(dev_priv)) {
> - /* Bspec wording suggests that LVDS port dithering only exists
> - * for 18bpp panels. */
> + /*
> + * Bspec wording suggests that LVDS port dithering only exists
> + * for 18bpp panels.
> + */
> if (pipe_config->dither && pipe_config->pipe_bpp == 18)
> temp |= LVDS_ENABLE_DITHER;
> else
> @@ -304,7 +311,7 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder,
> I915_WRITE(lvds_encoder->reg, temp);
> }
>
> -/**
> +/*
> * Sets the power state for the panel.
> */
> static void intel_enable_lvds(struct intel_encoder *encoder,
> @@ -441,7 +448,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
> return true;
> }
>
> -/**
> +/*
> * Detect the LVDS connection.
> *
> * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
> @@ -464,7 +471,7 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
> return connector_status_connected;
> }
>
> -/**
> +/*
> * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
> */
> static int intel_lvds_get_modes(struct drm_connector *connector)
> @@ -893,7 +900,8 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
> if (dmi_check_system(intel_dual_link_lvds))
> return true;
>
> - /* BIOS should set the proper LVDS register value at boot, but
> + /*
> + * BIOS should set the proper LVDS register value at boot, but
> * in reality, it doesn't set the value when the lid is closed;
> * we need to check "the value to be set" in VBT when LVDS
> * register is uninitialized.
> @@ -907,13 +915,17 @@ static bool compute_is_dual_link_lvds(struct intel_lvds_encoder *lvds_encoder)
>
> static bool intel_lvds_supported(struct drm_i915_private *dev_priv)
> {
> - /* With the introduction of the PCH we gained a dedicated
> - * LVDS presence pin, use it. */
> + /*
> + * With the introduction of the PCH we gained a dedicated
> + * LVDS presence pin, use it.
> + */
> if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
> return true;
>
> - /* Otherwise LVDS was only attached to mobile products,
> - * except for the inglorious 830gm */
> + /*
> + * Otherwise LVDS was only attached to mobile products,
> + * except for the inglorious 830gm
> + */
> if (INTEL_GEN(dev_priv) <= 4 &&
> IS_MOBILE(dev_priv) && !IS_I830(dev_priv))
> return true;
> @@ -923,7 +935,7 @@ static bool intel_lvds_supported(struct drm_i915_private *dev_priv)
>
> /**
> * intel_lvds_init - setup LVDS connectors on this device
> - * @dev: drm device
> + * @dev_priv: i915 device
> *
> * Create the connector, register the LVDS DDC bus, and try to figure out what
> * modes we can display on the LVDS panel (if present).
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
