Re: PROBLEM: i915 causes complete desktop freezes in 4.15-rc5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Compiled a couple of kernels with kasan enabled. I don't yet have a
crash, but on the system that has been crashing I have the following
kasan distress signals on bootup (dmesg attached):

[    0.027746] ==================================================================
[    0.027759] BUG: KASAN: use-after-free in kernel_poison_pages+0xa6/0x140
[    0.027765] Write of size 4096 at addr ffff88080b390000 by task swapper/0/1

[    0.027774] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc5-x-void #1
[    0.027775] Hardware name: Notebook                         N24_25BU/N24_25BU, BIOS 5.12 02/17/2017
[    0.027776] Call Trace:
[    0.027782]  dump_stack+0x5c/0x7a
[    0.027785]  print_address_description+0x6b/0x290
[    0.027787]  kasan_report+0x28f/0x380
[    0.027790]  ? kernel_poison_pages+0xa6/0x140
[    0.027792]  memset+0x1f/0x40
[    0.027795]  kernel_poison_pages+0xa6/0x140
[    0.027798]  __free_pages_ok+0x14c/0x460
[    0.027802]  release_pebs_buffer+0xae/0xd0
[    0.027804]  release_ds_buffers+0x9c/0x110
[    0.027808]  x86_release_hardware+0x86/0xa0
[    0.027810]  hw_perf_event_destroy+0xa/0x20
[    0.027813]  _free_event+0x179/0x540
[    0.027816]  perf_event_release_kernel+0x21e/0x3a0
[    0.027819]  ? perf_event_create_kernel_counter+0x15a/0x190
[    0.027823]  hardlockup_detector_perf_init+0x2c/0x3c
[    0.027826]  lockup_detector_init+0x24/0x7e
[    0.027829]  kernel_init_freeable+0x152/0x2f5
[    0.027831]  ? rest_init+0xd0/0xd0
[    0.027833]  kernel_init+0xf/0x11a
[    0.027835]  ? rest_init+0xd0/0xd0
[    0.027837]  ret_from_fork+0x1f/0x30

[    0.027842] The buggy address belongs to the page:
[    0.027848] page:00000000ae05d3d5 count:0 mapcount:0 mapping:          (null) index:0x0
[    0.027854] flags: 0x17ffe0000000000()
[    0.027860] raw: 017ffe0000000000 0000000000000000 0000000000000000 00000000ffffffff
[    0.027867] raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
[    0.027872] page dumped because: kasan: bad access detected

[    0.027878] Memory state around the buggy address:
[    0.027883]  ffff88080b38ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.027889]  ffff88080b38ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.027895] >ffff88080b390000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027900]                    ^
[    0.027904]  ffff88080b390080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027912]  ffff88080b390100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027917] ==================================================================
[    0.027923] Disabling lock debugging due to kernel taint





I'll follow up on the crashes when they happen, but I thought this
might be of some use.

Incidentally, I've compiled two kernels with kasan on: one using the
bad system's config (with make oldconfig), and one using the one on
the system that doesn't crash on the same machine.

The latter does *not* spit out the trace in dmesg (regardless of which
system I boot it on), while the former only complains on the bad
system (boots fine on the good OS).

So it must be specific to the kernel configuration + kernel
parameters, but I don't know how. I haven't mesed with the kernel
parameters myself: they are whatever the two respective GRUB
installations came with by default on the two systems.

I can attach whatever's needed and try out whatever you think might be
helpful, but I figured I'd keep the message light with just the kasan
trace dmesg attachment.



On Sun, Dec 31, 2017 at 04:54:14PM +0000, Chris Wilson wrote:
> Quoting Alexandru Chirvasitu (2017-12-31 16:52:36)
> > I see lockdep is configured (though I'm not familiar with the feature;
> > the config came with it, and I made oldconfig), but I'll need to
> > recompile for kasan.
> > 
> > I'll do that over the next few days, but once done, what would I get
> > back to you with? Again logs if / when the problem occurs? I'm still
> > unable to trigger it reliably.
> 
> The new dmesg, I expect kasan will print a few warnings before it oopses
> again.
> -Chris
[    0.000000] microcode: microcode updated early to revision 0x62, date = 2017-04-27
[    0.000000] Linux version 4.15.0-rc5-x-void (root@axiomatic) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #1 SMP PREEMPT Sun Dec 31 17:02:30 EST 2017
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc5-x-void root=UUID=66d5a55f-8ca3-47a1-850d-a0886325481c ro loglevel=4 slub_debug=P page_poison=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000086ebbfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000086ebc000-0x00000000871bbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000871bc000-0x00000000880e2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000880e3000-0x00000000880e3fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000880e4000-0x00000000880e4fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000880e5000-0x000000008c227fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008c228000-0x000000008cb97fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008cb98000-0x000000008cc67fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008cc68000-0x000000008cfe1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008cfe2000-0x000000008d3fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008d3fe000-0x000000008d3fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000008d3ff000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Notebook                         N24_25BU/N24_25BU, BIOS 5.12 02/17/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x86f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008E000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 008D800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x8d3ff max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fccb0-0x000fccbf] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x2a497000, 0x2a497fff] PGTABLE
[    0.000000] BRK [0x2a498000, 0x2a498fff] PGTABLE
[    0.000000] BRK [0x2a499000, 0x2a499fff] PGTABLE
[    0.000000] BRK [0x2a49a000, 0x2a49afff] PGTABLE
[    0.000000] BRK [0x2a49b000, 0x2a49bfff] PGTABLE
[    0.000000] BRK [0x2a49c000, 0x2a49cfff] PGTABLE
[    0.000000] BRK [0x2a49d000, 0x2a49dfff] PGTABLE
[    0.000000] BRK [0x2a49e000, 0x2a49efff] PGTABLE
[    0.000000] BRK [0x2a49f000, 0x2a49ffff] PGTABLE
[    0.000000] BRK [0x2a4a0000, 0x2a4a0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36fe1000-0x377e7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000008CC680A0 0000BC (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000008CC836B0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000008CC681F0 01B4BF (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x000000008CFE1C40 000040
[    0.000000] ACPI: APIC 0x000000008CC837C8 000084 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000008CC83850 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000008CC83898 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000008CC838D8 000322 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: FIDT 0x000000008CC83C00 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000008CC83CA0 003295 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000008CC86F38 000038 (v01 INTEL  KBL-ULT  00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008CC86F70 000024 (v02 INTEL  xh_OEMBD 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000008CC86F98 000042 (v01 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000008CC86FE0 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000008CC87EC0 000094 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x000000008CC87F58 000028 (v01 INTEL  KBL-ULT  00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000008CC87F80 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000008CC88220 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000008CC8B228 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000008CC8B260 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DMAR 0x000000008CC8B2B8 0000A8 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: ASF! 0x000000008CC8B360 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000086effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x86eff9000-0x86effdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000086effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000086ebbfff]
[    0.000000]   node   0: [mem 0x00000000871bc000-0x00000000880e2fff]
[    0.000000]   node   0: [mem 0x00000000880e5000-0x000000008c227fff]
[    0.000000]   node   0: [mem 0x000000008cb98000-0x000000008cc67fff]
[    0.000000]   node   0: [mem 0x000000008d3fe000-0x000000008d3fefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000086effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000086effffff]
[    0.000000] On node 0 totalpages: 8368018
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8896 pages used for memmap
[    0.000000]   DMA32 zone: 569335 pages, LIFO batch:31
[    0.000000]   Normal zone: 121792 pages used for memmap
[    0.000000]   Normal zone: 7794688 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 101 pages
[    0.000000] kasan: KernelAddressSanitizer initialized
[    0.000000] Reserving Intel graphics memory at 0x000000008e000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x86ebc000-0x871bbfff]
[    0.000000] PM: Registered nosave memory: [mem 0x880e3000-0x880e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x880e4000-0x880e4fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8c228000-0x8cb97fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cc68000-0x8cfe1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8cfe2000-0x8d3fdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x8d3ff000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 49 pages/cpu @        (ptrval) s162776 r8192 d29736 u524288
[    0.000000] pcpu-alloc: s162776 r8192 d29736 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8237245
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc5-x-void root=UUID=66d5a55f-8ca3-47a1-850d-a0886325481c ro loglevel=4 slub_debug=P page_poison=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 28645672K/33472072K available (10980K kernel code, 3911K rwdata, 4168K rodata, 1704K init, 9384K bss, 4826400K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 30258 entries in 119 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.001000] APIC: Switch to symmetric I/O mode setup
[    0.001000] DMAR: Host address width 39
[    0.001000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.001000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.001000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.001000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.001000] DMAR: RMRR base: 0x0000008c624000 end: 0x0000008c643fff
[    0.001000] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
[    0.001000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.001000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.001000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.002000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.002000] x2apic enabled
[    0.002000] Switched APIC routing to cluster x2apic.
[    0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011000] tsc: Detected 2900.000 MHz processor
[    0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5808.00 BogoMIPS (lpj=2904000)
[    0.011000] pid_max: default: 32768 minimum: 301
[    0.011000] Security Framework initialized
[    0.011000] Yama: becoming mindful.
[    0.014007] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.015416] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.015491] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.015551] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.016396] CPU: Physical Processor ID: 0
[    0.016397] CPU: Processor Core ID: 0
[    0.016405] mce: CPU supports 8 MCE banks
[    0.016433] CPU0: Thermal monitoring enabled (TM1)
[    0.016447] process: using mwait in idle threads
[    0.016450] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.016451] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.016619] Freeing SMP alternatives memory: 24K
[    0.018190] TSC deadline timer enabled
[    0.018194] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (family: 0x6, model: 0x8e, stepping: 0x9)
[    0.022058] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.022117] ... version:                4
[    0.022118] ... bit width:              48
[    0.022119] ... generic registers:      4
[    0.022120] ... value mask:             0000ffffffffffff
[    0.022121] ... max period:             00007fffffffffff
[    0.022121] ... fixed-purpose events:   3
[    0.022122] ... event mask:             000000070000000f
[    0.024040] Hierarchical SRCU implementation.
[    0.027746] ==================================================================
[    0.027759] BUG: KASAN: use-after-free in kernel_poison_pages+0xa6/0x140
[    0.027765] Write of size 4096 at addr ffff88080b390000 by task swapper/0/1

[    0.027774] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc5-x-void #1
[    0.027775] Hardware name: Notebook                         N24_25BU/N24_25BU, BIOS 5.12 02/17/2017
[    0.027776] Call Trace:
[    0.027782]  dump_stack+0x5c/0x7a
[    0.027785]  print_address_description+0x6b/0x290
[    0.027787]  kasan_report+0x28f/0x380
[    0.027790]  ? kernel_poison_pages+0xa6/0x140
[    0.027792]  memset+0x1f/0x40
[    0.027795]  kernel_poison_pages+0xa6/0x140
[    0.027798]  __free_pages_ok+0x14c/0x460
[    0.027802]  release_pebs_buffer+0xae/0xd0
[    0.027804]  release_ds_buffers+0x9c/0x110
[    0.027808]  x86_release_hardware+0x86/0xa0
[    0.027810]  hw_perf_event_destroy+0xa/0x20
[    0.027813]  _free_event+0x179/0x540
[    0.027816]  perf_event_release_kernel+0x21e/0x3a0
[    0.027819]  ? perf_event_create_kernel_counter+0x15a/0x190
[    0.027823]  hardlockup_detector_perf_init+0x2c/0x3c
[    0.027826]  lockup_detector_init+0x24/0x7e
[    0.027829]  kernel_init_freeable+0x152/0x2f5
[    0.027831]  ? rest_init+0xd0/0xd0
[    0.027833]  kernel_init+0xf/0x11a
[    0.027835]  ? rest_init+0xd0/0xd0
[    0.027837]  ret_from_fork+0x1f/0x30

[    0.027842] The buggy address belongs to the page:
[    0.027848] page:00000000ae05d3d5 count:0 mapcount:0 mapping:          (null) index:0x0
[    0.027854] flags: 0x17ffe0000000000()
[    0.027860] raw: 017ffe0000000000 0000000000000000 0000000000000000 00000000ffffffff
[    0.027867] raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
[    0.027872] page dumped because: kasan: bad access detected

[    0.027878] Memory state around the buggy address:
[    0.027883]  ffff88080b38ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.027889]  ffff88080b38ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    0.027895] >ffff88080b390000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027900]                    ^
[    0.027904]  ffff88080b390080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027912]  ffff88080b390100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    0.027917] ==================================================================
[    0.027923] Disabling lock debugging due to kernel taint
[    0.030258] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032040] smp: Bringing up secondary CPUs ...
[    0.040102] x86: Booting SMP configuration:
[    0.040104] .... node  #0, CPUs:      #1 #2 #3
[    0.059629] smp: Brought up 1 node, 4 CPUs
[    0.059629] smpboot: Max logical packages: 1
[    0.059629] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
[    0.062238] devtmpfs: initialized
[    0.062478] x86/mm: Memory block size: 128MB
[    0.095094] PM: Registering ACPI NVS region [mem 0x86ebc000-0x871bbfff] (3145728 bytes)
[    0.098758] PM: Registering ACPI NVS region [mem 0x880e3000-0x880e3fff] (4096 bytes)
[    0.098770] PM: Registering ACPI NVS region [mem 0x8cc68000-0x8cfe1fff] (3645440 bytes)
[    0.103107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.103107] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.103209] pinctrl core: initialized pinctrl subsystem
[    0.104635] NET: Registered protocol family 16
[    0.105435] audit: initializing netlink subsys (disabled)
[    0.106049] audit: type=2000 audit(1514759961.106:1): state=initialized audit_enabled=0 res=1
[    0.107063] cpuidle: using governor ladder
[    0.107063] cpuidle: using governor menu
[    0.107144] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.107145] ACPI: bus type PCI registered
[    0.107147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.108216] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.108219] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.108265] PCI: Using configuration type 1 for base access
[    0.122154] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.122154] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.123463] ACPI: Added _OSI(Module Device)
[    0.123464] ACPI: Added _OSI(Processor Device)
[    0.123466] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.123467] ACPI: Added _OSI(Processor Aggregator Device)
[    0.140591] ACPI: Executed 26 blocks of module-level executable AML code
[    0.315929] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.369231] ACPI: Dynamic OEM Table Load:
[    0.369243] ACPI: SSDT 0xFFFF88080ED48000 0006F6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.372590] ACPI: Executed 1 blocks of module-level executable AML code
[    0.373800] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.395359] ACPI: Dynamic OEM Table Load:
[    0.395368] ACPI: SSDT 0xFFFF88080ED3A880 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.397929] ACPI: Executed 1 blocks of module-level executable AML code
[    0.406554] ACPI: Dynamic OEM Table Load:
[    0.406564] ACPI: SSDT 0xFFFF88080ED4F700 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.424320] ACPI: Executed 1 blocks of module-level executable AML code
[    0.426842] ACPI: Dynamic OEM Table Load:
[    0.426849] ACPI: SSDT 0xFFFF88080AA12F80 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.429903] ACPI: Executed 1 blocks of module-level executable AML code
[    0.463396] ACPI: EC: EC started
[    0.463397] ACPI: EC: interrupt blocked
[    0.472183] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.472195] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.472207] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.472210] ACPI: Interpreter enabled
[    0.472388] ACPI: (supports S0 S3 S4 S5)
[    0.472389] ACPI: Using IOAPIC for interrupt routing
[    0.472734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.486838] ACPI: Enabled 6 GPEs in block 00 to 7F
[    1.092347] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.092380] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.093613] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.121552] PCI host bridge to bus 0000:00
[    1.121564] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.121576] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.121587] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.121598] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[    1.121609] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    1.121619] pci_bus 0000:00: root bus resource [bus 00-fe]
[    1.121643] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[    1.125084] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[    1.125097] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
[    1.125104] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    1.125109] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    1.129397] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    1.129413] pci 0000:00:08.0: reg 0x10: [mem 0xdf22f000-0xdf22ffff 64bit]
[    1.132918] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    1.132942] pci 0000:00:14.0: reg 0x10: [mem 0xdf210000-0xdf21ffff 64bit]
[    1.133087] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.139240] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    1.139264] pci 0000:00:14.2: reg 0x10: [mem 0xdf22e000-0xdf22efff 64bit]
[    1.142765] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    1.142793] pci 0000:00:16.0: reg 0x10: [mem 0xdf22d000-0xdf22dfff 64bit]
[    1.142940] pci 0000:00:16.0: PME# supported from D3hot
[    1.147763] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    1.147784] pci 0000:00:17.0: reg 0x10: [mem 0xdf228000-0xdf229fff]
[    1.147792] pci 0000:00:17.0: reg 0x14: [mem 0xdf22c000-0xdf22c0ff]
[    1.147801] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    1.147809] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    1.147818] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    1.147826] pci 0000:00:17.0: reg 0x24: [mem 0xdf22b000-0xdf22b7ff]
[    1.147938] pci 0000:00:17.0: PME# supported from D3hot
[    1.152586] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    1.152731] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.158754] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[    1.158907] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.164906] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[    1.165058] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.171090] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100
[    1.175681] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    1.175700] pci 0000:00:1f.2: reg 0x10: [mem 0xdf224000-0xdf227fff]
[    1.180184] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[    1.180215] pci 0000:00:1f.3: reg 0x10: [mem 0xdf220000-0xdf223fff 64bit]
[    1.180249] pci 0000:00:1f.3: reg 0x20: [mem 0xdf200000-0xdf20ffff 64bit]
[    1.180374] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    1.186031] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    1.186093] pci 0000:00:1f.4: reg 0x10: [mem 0xdf22a000-0xdf22a0ff 64bit]
[    1.186163] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    1.192559] acpiphp: Slot [1] registered
[    1.192676] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.194484] pci 0000:02:00.0: [8086:24fb] type 00 class 0x028000
[    1.194556] pci 0000:02:00.0: reg 0x10: [mem 0xdf100000-0xdf101fff 64bit]
[    1.194924] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.199090] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.199096] pci 0000:00:1c.2:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.201060] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[    1.201093] pci 0000:03:00.0: reg 0x10: [mem 0xdf015000-0xdf015fff]
[    1.201154] pci 0000:03:00.0: reg 0x30: [mem 0xdf000000-0xdf00ffff pref]
[    1.201403] pci 0000:03:00.0: supports D1 D2
[    1.201405] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.202295] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[    1.202326] pci 0000:03:00.1: reg 0x10: [io  0xe000-0xe0ff]
[    1.202354] pci 0000:03:00.1: reg 0x18: [mem 0xdf014000-0xdf014fff 64bit]
[    1.202371] pci 0000:03:00.1: reg 0x20: [mem 0xdf010000-0xdf013fff 64bit]
[    1.202605] pci 0000:03:00.1: supports D1 D2
[    1.202607] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    1.206068] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    1.206072] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    1.206076] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    1.231306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.233131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.234955] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.236761] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.238593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.240412] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.242225] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.244067] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.254560] ACPI: EC: interrupt unblocked
[    1.254575] ACPI: EC: event unblocked
[    1.254599] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.254614] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    1.255136] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.255136] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.255136] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.255136] vgaarb: loaded
[    1.256091] pps_core: LinuxPPS API ver. 1 registered
[    1.256092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    1.256129] PTP clock support registered
[    1.256161] EDAC MC: Ver: 3.0.0
[    1.257191] PCI: Using ACPI for IRQ routing
[    1.285597] PCI: pci_cache_line_size set to 64 bytes
[    1.285683] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    1.285696] e820: reserve RAM buffer [mem 0x86ebc000-0x87ffffff]
[    1.285706] e820: reserve RAM buffer [mem 0x880e3000-0x8bffffff]
[    1.285717] e820: reserve RAM buffer [mem 0x8c228000-0x8fffffff]
[    1.285728] e820: reserve RAM buffer [mem 0x8cc68000-0x8fffffff]
[    1.285739] e820: reserve RAM buffer [mem 0x8d3ff000-0x8fffffff]
[    1.285749] e820: reserve RAM buffer [mem 0x86f000000-0x86fffffff]
[    1.286638] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.286638] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    1.289001] clocksource: Switched to clocksource hpet
[    1.370769] VFS: Disk quotas dquot_6.6.0
[    1.370811] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.371285] pnp: PnP ACPI init
[    1.374313] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.374338] system 00:00: [io  0xffff] has been reserved
[    1.374362] system 00:00: [io  0xffff] has been reserved
[    1.374386] system 00:00: [io  0xffff] has been reserved
[    1.374410] system 00:00: [io  0x1800-0x18fe] has been reserved
[    1.374434] system 00:00: [io  0x164e-0x164f] has been reserved
[    1.374458] system 00:00: [io  0x3322-0x3323] has been reserved
[    1.374491] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.375667] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.376378] system 00:02: [io  0x1854-0x1857] has been reserved
[    1.376412] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.376760] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.378662] pnp 00:04: Plug and Play ACPI device, IDs SYN1217 PNP0f13 (active)
[    1.383972] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.383996] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.384044] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.384067] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    1.384090] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.384121] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.384144] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.384167] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    1.384199] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.384222] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[    1.384256] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.384983] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[    1.385031] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[    1.385054] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[    1.385086] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    1.385109] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[    1.385131] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    1.385153] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[    1.385186] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.389794] system 00:07: [io  0xff00-0xfffe] has been reserved
[    1.389831] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.418401] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[    1.418427] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[    1.418451] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    1.418476] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    1.418501] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[    1.418534] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.433053] pnp: PnP ACPI: found 9 devices
[    1.451573] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.451596] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    1.451607] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    1.451617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    1.451671] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
[    1.451681] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
[    1.451685] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    1.451714] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.451717] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.451721] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x901fffff]
[    1.451725] pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
[    1.451730] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.451734] pci 0000:00:1c.2:   bridge window [mem 0xdf100000-0xdf1fffff]
[    1.451741] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    1.451744] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    1.451748] pci 0000:00:1c.5:   bridge window [mem 0xdf000000-0xdf0fffff]
[    1.451756] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.451758] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.451760] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.451762] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[    1.451764] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    1.451766] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.451769] pci_bus 0000:01: resource 1 [mem 0x90000000-0x901fffff]
[    1.451771] pci_bus 0000:01: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
[    1.451773] pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf1fffff]
[    1.451775] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    1.451777] pci_bus 0000:03: resource 1 [mem 0xdf000000-0xdf0fffff]
[    1.454340] NET: Registered protocol family 2
[    1.455289] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.456555] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.456843] TCP: Hash tables configured (established 262144 bind 65536)
[    1.457066] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    1.457355] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    1.457848] NET: Registered protocol family 1
[    1.457897] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.462455] PCI: CLS 64 bytes, default 64
[    1.462729] Unpacking initramfs...
[    1.832754] Freeing initrd memory: 8220K
[    1.832804] DMAR: No ATSR found
[    1.833181] DMAR: dmar0: Using Queued invalidation
[    1.833212] dmar0: Allocated order 8 PASID table.
[    1.833222] DMAR: dmar1: Using Queued invalidation
[    1.833359] DMAR: Setting RMRR:
[    1.833858] DMAR: Setting identity map for device 0000:00:02.0 [0x8d800000 - 0x8fffffff]
[    1.834377] DMAR: Setting identity map for device 0000:00:14.0 [0x8c624000 - 0x8c643fff]
[    1.834385] DMAR: Prepare 0-16MiB unity mapping for LPC
[    1.834775] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    1.835192] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.835572] iommu: Adding device 0000:00:00.0 to group 0
[    1.835668] iommu: Adding device 0000:00:02.0 to group 1
[    1.835760] iommu: Adding device 0000:00:08.0 to group 2
[    1.835863] iommu: Adding device 0000:00:14.0 to group 3
[    1.835913] iommu: Adding device 0000:00:14.2 to group 3
[    1.836042] iommu: Adding device 0000:00:16.0 to group 4
[    1.836134] iommu: Adding device 0000:00:17.0 to group 5
[    1.836245] iommu: Adding device 0000:00:1c.0 to group 6
[    1.836299] iommu: Adding device 0000:00:1c.2 to group 6
[    1.836352] iommu: Adding device 0000:00:1c.5 to group 6
[    1.836455] iommu: Adding device 0000:00:1f.0 to group 7
[    1.836506] iommu: Adding device 0000:00:1f.2 to group 7
[    1.836556] iommu: Adding device 0000:00:1f.3 to group 7
[    1.836616] iommu: Adding device 0000:00:1f.4 to group 7
[    1.836669] iommu: Adding device 0000:02:00.0 to group 6
[    1.836721] iommu: Adding device 0000:03:00.0 to group 6
[    1.836776] iommu: Adding device 0000:03:00.1 to group 6
[    1.846586] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29dc05e54fc, max_idle_ns: 440795291716 ns
[    1.846873] Scanning for low memory corruption every 60 seconds
[    1.850928] Initialise system trusted keyrings
[    1.851103] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[    1.869788] zbud: loaded
[    1.874473] Key type asymmetric registered
[    1.874474] Asymmetric key parser 'x509' registered
[    1.874715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.874846] io scheduler noop registered
[    1.874847] io scheduler deadline registered
[    1.875256] io scheduler cfq registered (default)
[    1.875257] io scheduler mq-deadline registered
[    1.875258] io scheduler kyber registered
[    1.885851] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    1.885852] vesafb: scrolling: redraw
[    1.885854] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.885902] vesafb: framebuffer at 0xc0000000, mapped to 0x00000000a4d9eba1, using 8128k, total 8128k
[    2.066413] Console: switching to colour frame buffer device 240x67
[    2.245241] fb0: VESA VGA frame buffer device
[    2.245339] intel_idle: MWAIT substates: 0x11142120
[    2.245340] intel_idle: v0.4.1 model 0x8E
[    2.247722] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.249462] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.255614] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
[    2.255665] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    2.255666] e100: Copyright(c) 1999-2006 Intel Corporation
[    2.255751] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    2.255752] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.255848] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.255848] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.256200] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
[    2.259974] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.260202] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.260904] mousedev: PS/2 mouse device common for all mice
[    2.261210] rtc_cmos 00:01: RTC can wake from S4
[    2.261975] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.262135] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.262220] intel_pstate: Intel P-state driver initializing
[    2.263204] intel_pstate: HWP enabled
[    2.263493] ledtrig-cpu: registered to indicate activity on CPUs
[    2.264179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.265832] NET: Registered protocol family 10
[    2.273544] Segment Routing with IPv6
[    2.273603] NET: Registered protocol family 17
[    2.273802] Key type dns_resolver registered
[    2.274910] microcode: sig=0x806e9, pf=0x80, revision=0x62
[    2.275297] microcode: Microcode Update Driver: v2.2.
[    2.275329] sched_clock: Marking stable (2275252624, 0)->(2275182932, 69692)
[    2.276102] registered taskstats version 1
[    2.276103] Loading compiled-in X.509 certificates
[    2.276313] zswap: loaded using pool lzo/zbud
[    2.287356] rtc_cmos 00:01: setting system clock to 2017-12-31 22:39:24 UTC (1514759964)
[    2.296289] Freeing unused kernel memory: 1704K
[    2.296290] Write protecting the kernel read-only data: 18432k
[    2.296895] Freeing unused kernel memory: 1288K
[    2.303415] Freeing unused kernel memory: 1976K
[    2.387403] dracut: dracut-046
[    2.492797] systemd-udevd[220]: starting version 3.2.5
[    2.494242] udevd[221]: starting eudev-3.2.5
[    2.595555] ACPI: bus type USB registered
[    2.595912] usbcore: registered new interface driver usbfs
[    2.596131] usbcore: registered new interface driver hub
[    2.596305] usbcore: registered new device driver usb
[    2.602610] SCSI subsystem initialized
[    2.616448] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.616532] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    2.618731] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    2.618743] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    2.621586] libata version 3.00 loaded.
[    2.623023] hub 1-0:1.0: USB hub found
[    2.623257] hub 1-0:1.0: 12 ports detected
[    2.660622] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    2.660685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    2.664116] hub 2-0:1.0: USB hub found
[    2.664333] hub 2-0:1.0: 6 ports detected
[    2.691545] ahci 0000:00:17.0: version 3.0
[    2.706021] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x5 impl SATA mode
[    2.706028] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    2.716897] scsi host0: ahci
[    2.718350] scsi host1: ahci
[    2.719261] scsi host2: ahci
[    2.719897] ata1: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b100 irq 125
[    2.719898] ata2: DUMMY
[    2.719900] ata3: SATA max UDMA/133 abar m2048@0xdf22b000 port 0xdf22b200 irq 125
[    2.847405] clocksource: Switched to clocksource tsc
[    2.985169] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.031210] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.031296] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.033670] ata1.00: ATA-9: HFS250G32TND-N1A2A, 30000P10, max UDMA/133
[    3.033678] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.033757] ata3.00: ATA-9: HFS512G39TND-N210A, 30000P10, max UDMA/133
[    3.033765] ata3.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.035087] ata1.00: configured for UDMA/133
[    3.035196] ata3.00: configured for UDMA/133
[    3.036857] scsi 0:0:0:0: Direct-Access     ATA      HFS250G32TND-N1A 0P10 PQ: 0 ANSI: 5
[    3.043476] scsi 2:0:0:0: Direct-Access     ATA      HFS512G39TND-N21 0P10 PQ: 0 ANSI: 5
[    3.068905] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.068914] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.069105] sd 0:0:0:0: [sda] Write Protect is off
[    3.069113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.069596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.071587] sd 2:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    3.071596] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[    3.071894] sd 2:0:0:0: [sdb] Write Protect is off
[    3.071908] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.073246] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.079684]  sda: sda1 sda2 sda3 sda4
[    3.082452]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[    3.088056] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.091616] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.169806] usb-storage 1-1:1.0: USB Mass Storage device detected
[    3.173790] scsi host3: usb-storage 1-1:1.0
[    3.188508] usbcore: registered new interface driver usb-storage
[    3.197200] usbcore: registered new interface driver uas
[    3.257021] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    3.502178] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[    4.193834] scsi 3:0:0:0: Direct-Access     SanDisk  Cruzer Glide     1.00 PQ: 0 ANSI: 6
[    4.200593] sd 3:0:0:0: [sdc] 245039104 512-byte logical blocks: (125 GB/117 GiB)
[    4.203513] sd 3:0:0:0: [sdc] Write Protect is off
[    4.203522] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    4.204512] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.239394]  sdc: sdc1 sdc2 sdc3
[    4.248550] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[    4.695777] PM: Starting manual resume from disk
[    4.859909] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: data=ordered
[    4.938368] dracut: Checking ext4: /dev/disk/by-uuid/66d5a55f-8ca3-47a1-850d-a0886325481c
[    4.938530] dracut: issuing e2fsck -a  /dev/disk/by-uuid/66d5a55f-8ca3-47a1-850d-a0886325481c
[    5.003263] dracut: /dev/disk/by-uuid/66d5a55f-8ca3-47a1-850d-a0886325481c: clean, 126829/7397376 files, 3322060/29580795 blocks
[    5.016150] dracut: Mounting /dev/disk/by-uuid/66d5a55f-8ca3-47a1-850d-a0886325481c with -o rw,noatime,data=ordered,ro
[    5.184897] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.187387] random: crng init done
[    5.390396] dracut: Mounted root filesystem /dev/sdc3
[    5.526119] dracut: Switching root
[    7.097655] fuse init (API version 7.26)
[    7.219055] raid6: sse2x1   gen()  1546 MB/s
[    7.236012] raid6: sse2x1   xor()  2064 MB/s
[    7.253006] raid6: sse2x2   gen()  8023 MB/s
[    7.270005] raid6: sse2x2   xor()  7455 MB/s
[    7.287006] raid6: sse2x4   gen() 12531 MB/s
[    7.304005] raid6: sse2x4   xor()  9279 MB/s
[    7.321006] raid6: avx2x1   gen() 13914 MB/s
[    7.338005] raid6: avx2x1   xor() 10775 MB/s
[    7.355005] raid6: avx2x2   gen() 19496 MB/s
[    7.372004] raid6: avx2x2   xor() 13916 MB/s
[    7.389006] raid6: avx2x4   gen() 22878 MB/s
[    7.406005] raid6: avx2x4   xor() 17324 MB/s
[    7.406006] raid6: using algorithm avx2x4 gen() 22878 MB/s
[    7.406006] raid6: .... xor() 17324 MB/s, rmw enabled
[    7.406007] raid6: using avx2x2 recovery algorithm
[    7.458441] xor: automatically using best checksumming function   avx       
[    7.927569] Btrfs loaded, crc32c=crc32c-intel
[    8.007447] loop: module loaded
[    8.060290] tun: Universal TUN/TAP device driver, 1.6
[    8.124136] PPP generic driver version 2.4.2
[    8.263621] device-mapper: uevent: version 1.0.3
[    8.265973] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
[    8.294312] VFIO - User Level meta-driver version: 0.3
[    8.565864] Bluetooth: Core ver 2.22
[    8.566171] NET: Registered protocol family 31
[    8.566175] Bluetooth: HCI device and connection manager initialized
[    8.566209] Bluetooth: HCI socket layer initialized
[    8.566240] Bluetooth: L2CAP socket layer initialized
[    8.566366] Bluetooth: SCO socket layer initialized
[    8.646955] hidraw: raw HID events driver (C) Jiri Kosina
[    8.782074] NET: Registered protocol family 40
[    9.155068] udevd[492]: starting version 3.2.5
[    9.451359] udevd[493]: starting eudev-3.2.5
[    9.771258] ACPI: AC Adapter [AC] (on-line)
[   10.058352] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.058403] ACPI: Power Button [PWRB]
[   10.058745] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[   10.058788] ACPI: Sleep Button [SLPB]
[   10.059153] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[   10.059189] ACPI: Lid Switch [LID0]
[   10.059571] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   10.059629] ACPI: Power Button [PWRF]
[   10.101155] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[   10.101265] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[   10.142500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.338121] thermal LNXTHERM:00: registered as thermal_zone1
[   10.338127] ACPI: Thermal Zone [TZ0] (47 C)
[   10.366848] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   10.483440] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[   10.483442] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   10.483442] RAPL PMU: hw unit of domain package 2^-14 Joules
[   10.483443] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   10.483444] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   10.483444] RAPL PMU: hw unit of domain psys 2^-14 Joules
[   10.536859] ACPI: Battery Slot [BAT0] (battery absent)
[   10.636725] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.869632] Linux agpgart interface v0.103
[   10.910984] usbcore: registered new interface driver btusb
[   10.921537] Bluetooth: hci0: read Intel version: 370810225019140f1d
[   10.921540] Bluetooth: hci0: Intel device is already patched. patch num: 1d
[   11.042213] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   11.042361] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[   11.057870] r8169 0000:03:00.1 eth0: RTL8411 at 0x00000000b8f40db0, 80:fa:5b:48:16:24, XID 1c800800 IRQ 127
[   11.057887] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   11.226599] iTCO_vendor_support: vendor-support=0
[   11.302644] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
[   11.338282] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.338656] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[   11.339567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.396102] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   11.400966] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   11.405873] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   11.405880] cfg80211: failed to load regulatory.db
[   11.571970] psmouse serio1: synaptics: queried max coordinates: x [..5718], y [..4908]
[   11.610060] psmouse serio1: synaptics: queried min coordinates: x [1238..], y [956..]
[   11.610279] psmouse serio1: synaptics: Your touchpad (PNP: SYN1217 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@xxxxxxxxxxxxxxx.
[   11.673513] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00223/0x840300/0x26800/0x0, board id: 3175, fw id: 2330500
[   11.693737] Intel(R) Wireless WiFi driver for Linux
[   11.693741] Copyright(c) 2003- 2015 Intel Corporation
[   11.713939] AVX2 version of gcm_enc/dec engaged.
[   11.713941] AES CTR mode by8 optimization enabled
[   11.717235] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   11.941726] iwlwifi 0000:02:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
[   12.635946] media: Linux media interface: v0.10
[   13.108313] Linux video capture interface: v2.00
[   13.338757] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
[   13.369235] iwlwifi 0000:02:00.0: base HW address: b0:35:9f:2c:85:17
[   13.620852] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   13.630289] thermal thermal_zone2: failed to read out thermal zone (-61)
[   13.786355] intel_rapl: Found RAPL domain package
[   13.786361] intel_rapl: Found RAPL domain core
[   13.786366] intel_rapl: Found RAPL domain dram
[   13.857003] uvcvideo: Found UVC 1.00 device BisonCam,NB Pro (5986:1111)
[   13.864084] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[   13.864094] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[   13.864101] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[   13.864108] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[   13.866794] input: BisonCam,NB Pro: BisonCam,NB Pr as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8
[   13.868586] usbcore: registered new interface driver uvcvideo
[   13.868589] USB Video Class driver (1.1.1)
[   13.936305] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   13.999919] [drm] Memory usable by graphics device = 4096M
[   13.999921] [drm] VT-d active for gfx access
[   13.999928] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[   13.999929] fb: switching to inteldrmfb from VESA VGA
[   14.000158] Console: switching to colour dummy device 80x25
[   14.000439] [drm] Replacing VGA console driver
[   14.007352] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.007353] [drm] Driver supports precise vblank timestamp query.
[   14.012085] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   14.061065] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[   14.081802] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[   14.090412] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   14.095941] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   14.096706] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   14.106211] fbcon: inteldrmfb (fb0) is primary device
[   15.239097] Console: switching to colour frame buffer device 240x67
[   15.275689] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   15.290145] EXT4-fs (sdc3): re-mounted. Opts: (null)
[   15.551382] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.551387] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.551390] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   15.551392] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   15.551394] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   15.551398] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   15.551400] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   15.658222] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   15.664537] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   15.665149] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   15.665764] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   15.666394] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   15.667044] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[   15.667678] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   15.668300] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[   15.711361] [drm] RC6 on
[   16.162846] EXT4-fs (sdc3): re-mounted. Opts: (null)
[   16.228517] Adding 4194300k swap on /dev/sdc2.  Priority:-2 extents:1 across:4194300k FS
[   16.669595] udevd[647]: starting version 3.2.5
[   16.674806] udevd[647]: starting eudev-3.2.5
[   17.725373] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   17.847342] r8169 0000:03:00.1 enp3s0f1: link down
[   17.847345] r8169 0000:03:00.1 enp3s0f1: link down
[   17.847512] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
[   20.799489] r8169 0000:03:00.1 enp3s0f1: link up
[   20.799512] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready
[   21.067332] wlp2s0: authenticate with 48:5d:36:67:ee:3e
[   21.071221] wlp2s0: send auth to 48:5d:36:67:ee:3e (try 1/3)
[   21.077594] wlp2s0: authenticated
[   21.079112] wlp2s0: associate with 48:5d:36:67:ee:3e (try 1/3)
[   21.085582] wlp2s0: RX AssocResp from 48:5d:36:67:ee:3e (capab=0x431 status=0 aid=2)
[   21.089694] wlp2s0: associated
[   21.151576] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux