From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Turns out that just writing CURPOS isn't sufficient to move the cursor on some platforms. My 830 works just fine, but eg. 945 and PNV don't. On those platforms we need to arm even the CURPOS update with a CURBASE write. Even worse, a write to any of the cursor register apart from CURBASE will cancel an already pending cursor update. So if we have armed a CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank would cancel that armed update. Thus we're left with a cursor that doesn't appear to move, or even change shape. Fix the problem by always performing the CURBASE write after a CURPOS write. Bspec is somewhat unclear which platforms actually require this CURBASE write and which don't. So to keep it simple and to make sure we really fix the problem across all supported devices, let's just perform the CURBASE write unconditionally. Cc: Paul Menzel <pmenzel@xxxxxxxxxxxxx> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790 Fixes: 75343a44c901 ("drm/i915: Drop useless posting reads from cursor commit") Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2144adc5b1d5..460bd942fcb7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9555,7 +9555,16 @@ static void i9xx_update_cursor(struct intel_plane *plane, * On some platforms writing CURCNTR first will also * cause CURPOS to be armed by the CURBASE write. * Without the CURCNTR write the CURPOS write would - * arm itself. + * arm itself. Thus we always start the full update + * with a CURCNTR write. + * + * On other platforms CURPOS always requires the + * CURBASE write to arm the update. Additonally + * a write to any of the cursor register will cancel + * an already armed cursor update. Thus leaving out + * the CURBASE write after CURPOS could lead to a + * cursor that doesn't appear to move, or even change + * shape. Thus we always write CURBASE. * * CURCNTR and CUR_FBC_CTL are always * armed by the CURBASE write only. @@ -9574,6 +9583,7 @@ static void i9xx_update_cursor(struct intel_plane *plane, plane->cursor.cntl = cntl; } else { I915_WRITE_FW(CURPOS(pipe), pos); + I915_WRITE_FW(CURBASE(pipe), base); } POSTING_READ_FW(CURBASE(pipe)); -- 2.13.0 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
