From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Replace __raw_i915_read32() with I915_READ_FW() in the workaround for
the SKL+ scanline counter hardware fail. The two are the same thing
but everyone else uses I915_READ_FW() so let's follow suit.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/i915_irq.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 70214e1fcd10..3c2109b4be2c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -817,8 +817,7 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
for (i = 0; i < 100; i++) {
udelay(1);
- temp = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) &
- DSL_LINEMASK_GEN3;
+ temp = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
if (temp != position) {
position = temp;
break;
--
2.10.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
