Re: [PATCH 08/14] drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 15, 2016 at 04:37:53PM +0100, Maarten Lankhorst wrote:
> Op 12-12-16 om 21:35 schreef ville.syrjala@xxxxxxxxxxxxxxx:
> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Check whether anything relevant has actually change when we compute new
> > watermarks for each plane in the state. If the watermarks for no
> > primary/sprite planes changed we don't have to recompute the FIFO split
> > or reprogram the DSBARB registers. And even the cursor watermarks didn't
> > change we can skip the merge+invert step between all the planes on
> > the pipe as well.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/i915/intel_atomic.c |  1 +
> >  drivers/gpu/drm/i915/intel_drv.h    |  1 +
> >  drivers/gpu/drm/i915/intel_pm.c     | 73 +++++++++++++++++++++++++++++--------
> >  3 files changed, 60 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
> > index c5a166752eda..df33f270b459 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic.c
> > @@ -99,6 +99,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
> >  	crtc_state->update_wm_pre = false;
> >  	crtc_state->update_wm_post = false;
> >  	crtc_state->fb_changed = false;
> > +	crtc_state->fifo_changed = false;
> >  	crtc_state->wm.need_postvbl_update = false;
> >  	crtc_state->fb_bits = 0;
> This flag is only used in intel_pm.c, maybe put it in crtc_state->wm.vlv.fifo_changed, and clear it in the beginning of the wm recalculation?

I don't really like that. The state we get from duplicate_state() should
be directly useable IMO. It was already checked after all. So all these
kinds of flags should be reset immediately I think.

I guess modeset is a bit of an exception to my logic there. That is I'm
forcing the flag back to true wheever there's a modeset. Alternatively
I could restore the registers whenever the power well gets turned back
on, but this way is a little simpler I think.

> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 66668c18a47a..a92857864ee8 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -560,6 +560,7 @@ struct intel_crtc_state {
> >  	bool disable_cxsr;
> >  	bool update_wm_pre, update_wm_post; /* watermarks are updated */
> >  	bool fb_changed; /* fb on any of the planes is changed */
> > +	bool fifo_changed; /* FIFO split is changed */
> >  
> >  	/* Pipe source size (ie. panel fitter input size)
> >  	 * All planes will be positioned inside this space,
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > index f68b46eed224..c7cc62cf51f6 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -1103,31 +1103,36 @@ static u16 vlv_invert_wm_value(u16 wm, u16 fifo_size)
> >  }
> >  
> >  /* starting from 'level' set all higher levels to 'value' */
> > -static void vlv_plane_wm_set(struct intel_crtc_state *crtc_state,
> > +static bool vlv_plane_wm_set(struct intel_crtc_state *crtc_state,
> >  			     int level, enum plane_id plane_id, u16 value)
> >  {
> >  	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
> >  	int num_levels = vlv_num_wm_levels(dev_priv);
> > +	bool dirty = false;
> >  
> >  	for (; level < num_levels; level++) {
> >  		struct vlv_pipe_wm *noninverted =
> >  			&crtc_state->wm.vlv.noninverted[level];
> >  
> > +		dirty |= noninverted->plane[plane_id] != value;
> >  		noninverted->plane[plane_id] = value;
> >  	}
> > +
> > +	return dirty;
> >  }
> >  
> > -static void vlv_plane_wm_compute(struct intel_crtc_state *crtc_state,
> > +static bool vlv_plane_wm_compute(struct intel_crtc_state *crtc_state,
> >  				 const struct intel_plane_state *plane_state)
> >  {
> >  	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
> >  	enum plane_id plane_id = plane->id;
> >  	int num_levels = vlv_num_wm_levels(to_i915(plane->base.dev));
> >  	int level;
> > +	bool dirty = false;
> >  
> >  	if (!plane_state->base.visible) {
> > -		vlv_plane_wm_set(crtc_state, 0, plane_id, 0);
> > -		return;
> > +		dirty |= vlv_plane_wm_set(crtc_state, 0, plane_id, 0);
> > +		goto out;
> >  	}
> >  
> >  	for (level = 0; level < num_levels; level++) {
> > @@ -1143,17 +1148,22 @@ static void vlv_plane_wm_compute(struct intel_crtc_state *crtc_state,
> >  		if (wm > max_wm)
> >  			break;
> >  
> > +		dirty |= noninverted->plane[plane_id] != wm;
> >  		noninverted->plane[plane_id] = wm;
> >  	}
> >  
> >  	/* mark all higher levels as invalid */
> > -	vlv_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
> > +	dirty |= vlv_plane_wm_set(crtc_state, level, plane_id, USHRT_MAX);
> >  
> > -	DRM_DEBUG_KMS("%s wms: [0]=%d,[1]=%d,[2]=%d\n",
> > -		      plane->base.name,
> > -		      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_PM2].plane[plane_id],
> > -		      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_PM5].plane[plane_id],
> > -		      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_DDR_DVFS].plane[plane_id]);
> > +out:
> > +	if (dirty)
> > +		DRM_DEBUG_KMS("%s wms: [0]=%d,[1]=%d,[2]=%d\n",
> > +			      plane->base.name,
> > +			      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_PM2].plane[plane_id],
> > +			      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_PM5].plane[plane_id],
> > +			      crtc_state->wm.vlv.noninverted[VLV_WM_LEVEL_DDR_DVFS].plane[plane_id]);
> > +
> > +	return dirty;
> >  }
> >  
> >  static bool vlv_plane_wm_is_valid(const struct intel_crtc_state *crtc_state,
> > @@ -1186,10 +1196,12 @@ static int vlv_compute_pipe_wm(struct intel_crtc_state *crtc_state)
> >  		&crtc_state->wm.vlv.fifo_state;
> >  	int num_active_planes = hweight32(crtc_state->active_planes &
> >  					  ~BIT(PLANE_CURSOR));
> > +	bool needs_modeset = drm_atomic_crtc_needs_modeset(&crtc_state->base);
> >  	struct intel_plane_state *plane_state;
> >  	struct intel_plane *plane;
> >  	enum plane_id plane_id;
> >  	int level, ret, i;
> > +	unsigned int dirty = 0;
> >  
> >  	for_each_intel_plane_in_state(state, plane, plane_state, i) {
> >  		const struct intel_plane_state *old_plane_state =
> > @@ -1199,7 +1211,37 @@ static int vlv_compute_pipe_wm(struct intel_crtc_state *crtc_state)
> >  		    old_plane_state->base.crtc != &crtc->base)
> >  			continue;
> >  
> > -		vlv_plane_wm_compute(crtc_state, plane_state);
> > +		if (vlv_plane_wm_compute(crtc_state, plane_state))
> > +			dirty |= BIT(plane->id);
> > +	}
> > +
> > +	/*
> > +	 * DSPARB registers may have been reset due to the
> > +	 * power well being turned off. Make sure we restore
> > +	 * them to a consistent state even if no primary/sprite
> > +	 * planes are initially active.
> > +	 */
> > +	if (needs_modeset)
> > +		crtc_state->fifo_changed = true;
> > +
> > +	if (!dirty)
> > +		return 0;
> > +
> > +	/* cursor changes don't warrant a FIFO recompute */
> > +	if (dirty & ~BIT(PLANE_CURSOR)) {
> > +		const struct intel_crtc_state *old_crtc_state =
> > +			to_intel_crtc_state(crtc->base.state);
> > +		const struct vlv_fifo_state *old_fifo_state =
> > +			&old_crtc_state->wm.vlv.fifo_state;
> > +
> > +		ret = vlv_compute_fifo(crtc_state);
> > +		if (ret)
> > +			return ret;
> > +
> > +		if (needs_modeset ||
> > +		    memcmp(old_fifo_state, fifo_state,
> > +			   sizeof(*fifo_state)) != 0)
> > +			crtc_state->fifo_changed = true;
> >  	}
> >  
> >  	/* initially allow all levels */
> > @@ -1212,10 +1254,6 @@ static int vlv_compute_pipe_wm(struct intel_crtc_state *crtc_state)
> >  	wm_state->cxsr = crtc->pipe != PIPE_C &&
> >  		crtc->wm.cxsr_allowed && num_active_planes == 1;
> >  
> > -	ret = vlv_compute_fifo(crtc_state);
> > -	if (ret)
> > -		return ret;
> > -
> >  	for (level = 0; level < wm_state->num_levels; level++) {
> >  		const struct vlv_pipe_wm *noninverted =
> >  			&crtc_state->wm.vlv.noninverted[level];
> > @@ -1265,6 +1303,9 @@ static void vlv_atomic_update_fifo(struct intel_atomic_state *state,
> >  		&crtc_state->wm.vlv.fifo_state;
> >  	int sprite0_start, sprite1_start, fifo_size;
> >  
> > +	if (!crtc_state->fifo_changed)
> > +		return;
> > +
> >  	sprite0_start = fifo_state->plane[PLANE_PRIMARY];
> >  	sprite1_start = fifo_state->plane[PLANE_SPRITE0] + sprite0_start;
> >  	fifo_size = fifo_state->plane[PLANE_SPRITE1] + sprite1_start;
> > @@ -4631,6 +4672,8 @@ void vlv_wm_get_hw_state(struct drm_device *dev)
> >  		active->num_levels = wm->level + 1;
> >  		active->cxsr = wm->cxsr;
> >  
> > +		vlv_get_fifo_size(crtc_state);
> > +
> >  		/* FIXME sanitize things more */
> >  		for (level = 0; level < active->num_levels; level++) {
> >  			struct vlv_pipe_wm *noninverted =
> 

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux