On Mon, 19 Sep 2016, "Lee, Shawn C" <shawn.c.lee@xxxxxxxxx> wrote: > From: "Lee, Shawn C" <shawn.c.lee@xxxxxxxxx> > > SPT_PWM_GRANULARITY (SOUTH_CHICKEN1, bit 0) controls the granularity > (minimum increment) of the PWM backlight control counter. PWM frequency > adjustment on 128 clock increments when this bit was 1. And 16 clock > increments when it was 0. > > PWM frequency multiple octuple (from 200Hz to 1.6KHz) due to > SPT_PWM_GRANULARITY was clear to 0 after S3. This patch save > SOUTH_CHICKEN1 register value before suspend. And will restore > it after i915 resume. Sorry, I updated the patch already https://patchwork.freedesktop.org/patch/111128/ https://patchwork.freedesktop.org/patch/111129/ BR, Jani. > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97486 > > Cc: Jani Nikula <jani.nikula@xxxxxxxxx> > Reviewed-by: Cooper Chiou <cooper.chiou@xxxxxxxxx> > Reviewed-by: Wei Shun Chen <wei.shun.chang@xxxxxxxxx> > Reviewed-by: Gary C Wang <gary.c.wang@xxxxxxxxx> > Signed-off-by: Shawn Lee <shawn.c.lee@xxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_drv.h | 1 + > drivers/gpu/drm/i915/intel_panel.c | 24 ++++++++++++++++++++++-- > 2 files changed, 23 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h > index 570a7ca..c4bc690 100644 > --- a/drivers/gpu/drm/i915/intel_drv.h > +++ b/drivers/gpu/drm/i915/intel_drv.h > @@ -256,6 +256,7 @@ struct intel_panel { > u32 level; > u32 min; > u32 max; > + bool pwm_alternate_increment; > bool enabled; > bool combination_mode; /* gen 2/4 only */ > bool active_low_pwm; > diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c > index c10e9b0..e1dc6bd 100644 > --- a/drivers/gpu/drm/i915/intel_panel.c > +++ b/drivers/gpu/drm/i915/intel_panel.c > @@ -841,7 +841,7 @@ static void lpt_enable_backlight(struct intel_connector *connector) > { > struct drm_i915_private *dev_priv = to_i915(connector->base.dev); > struct intel_panel *panel = &connector->panel; > - u32 pch_ctl1, pch_ctl2; > + u32 pch_ctl1, pch_ctl2, mul; > > pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); > if (pch_ctl1 & BLM_PCH_PWM_ENABLE) { > @@ -867,6 +867,16 @@ static void lpt_enable_backlight(struct intel_connector *connector) > > /* This won't stick until the above enable. */ > intel_panel_actually_set_backlight(connector, panel->backlight.level); > + > + if (HAS_PCH_LPT(dev_priv)) { > + mul = I915_READ(SOUTH_CHICKEN2); > + mul &= ~LPT_PWM_GRANULARITY; > + I915_WRITE(SOUTH_CHICKEN2, mul | (panel->backlight.pwm_alternate_increment << LPT_PWM_GRANULARITY)); > + } else { > + mul = I915_READ(SOUTH_CHICKEN1); > + mul &= ~SPT_PWM_GRANULARITY; > + I915_WRITE(SOUTH_CHICKEN1, mul | (panel->backlight.pwm_alternate_increment << SPT_PWM_GRANULARITY)); > + } > } > > static void pch_enable_backlight(struct intel_connector *connector) > @@ -1413,7 +1423,7 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus > { > struct drm_i915_private *dev_priv = to_i915(connector->base.dev); > struct intel_panel *panel = &connector->panel; > - u32 pch_ctl1, pch_ctl2, val; > + u32 pch_ctl1, pch_ctl2, val, mul; > > pch_ctl1 = I915_READ(BLC_PWM_PCH_CTL1); > panel->backlight.active_low_pwm = pch_ctl1 & BLM_PCH_POLARITY; > @@ -1436,6 +1446,16 @@ static int lpt_setup_backlight(struct intel_connector *connector, enum pipe unus > > panel->backlight.enabled = pch_ctl1 & BLM_PCH_PWM_ENABLE; > > + if (HAS_PCH_LPT(dev_priv)) > + mul = I915_READ(SOUTH_CHICKEN2) & LPT_PWM_GRANULARITY; > + else > + mul = I915_READ(SOUTH_CHICKEN1) & SPT_PWM_GRANULARITY; > + > + if ( mul ) > + panel->backlight.pwm_alternate_increment = true; > + else > + panel->backlight.pwm_alternate_increment = false; > + > return 0; > } -- Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
