During watermarks calculations, this value is used in 3 different
places. Only one of them was not using a hardcoded 4. Move the code up
so everybody can benefit from the actual value.
This should only help on situations with Y tiling + 90/270 rotation +
1 or 2 bpp or NV12.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 56 +++++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f8ac928..5a23a91 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3499,7 +3499,8 @@ static uint32_t skl_wm_method1(uint32_t pixel_rate, uint8_t cpp, uint32_t latenc
static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
uint32_t horiz_pixels, uint8_t cpp,
- uint64_t tiling, uint32_t latency)
+ uint64_t tiling, uint32_t latency,
+ uint32_t y_min_scanlines)
{
uint32_t ret;
uint32_t plane_bytes_per_line, plane_blocks_per_line;
@@ -3512,9 +3513,9 @@ static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal,
if (tiling == I915_FORMAT_MOD_Y_TILED ||
tiling == I915_FORMAT_MOD_Yf_TILED) {
- plane_bytes_per_line *= 4;
+ plane_bytes_per_line *= y_min_scanlines;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
- plane_blocks_per_line /= 4;
+ plane_blocks_per_line /= y_min_scanlines;
} else if (tiling == DRM_FORMAT_MOD_NONE) {
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512) + 1;
} else {
@@ -3571,6 +3572,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
uint8_t cpp;
uint32_t width = 0, height = 0;
uint32_t plane_pixel_rate;
+ uint32_t y_min_scanlines;
if (latency == 0 || !cstate->base.active || !intel_pstate->base.visible) {
*enabled = false;
@@ -3586,38 +3588,44 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
cpp = drm_format_plane_cpp(fb->pixel_format, 0);
plane_pixel_rate = skl_adjusted_plane_pixel_rate(cstate, intel_pstate);
+ if (intel_rotation_90_or_270(pstate->rotation)) {
+ int cpp = (fb->pixel_format == DRM_FORMAT_NV12) ?
+ drm_format_plane_cpp(fb->pixel_format, 1) :
+ drm_format_plane_cpp(fb->pixel_format, 0);
+
+ switch (cpp) {
+ case 1:
+ y_min_scanlines = 16;
+ break;
+ case 2:
+ y_min_scanlines = 8;
+ break;
+ default:
+ WARN(1, "Unsupported pixel depth for rotation");
+ case 4:
+ y_min_scanlines = 4;
+ break;
+ }
+ } else {
+ y_min_scanlines = 4;
+ }
+
method1 = skl_wm_method1(plane_pixel_rate, cpp, latency);
method2 = skl_wm_method2(plane_pixel_rate,
cstate->base.adjusted_mode.crtc_htotal,
width,
cpp,
fb->modifier[0],
- latency);
+ latency,
+ y_min_scanlines);
plane_bytes_per_line = width * cpp;
plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED) {
- uint32_t min_scanlines = 4;
- uint32_t y_tile_minimum;
- if (intel_rotation_90_or_270(pstate->rotation)) {
- int cpp = (fb->pixel_format == DRM_FORMAT_NV12) ?
- drm_format_plane_cpp(fb->pixel_format, 1) :
- drm_format_plane_cpp(fb->pixel_format, 0);
-
- switch (cpp) {
- case 1:
- min_scanlines = 16;
- break;
- case 2:
- min_scanlines = 8;
- break;
- case 8:
- WARN(1, "Unsupported pixel depth for rotation");
- }
- }
- y_tile_minimum = plane_blocks_per_line * min_scanlines;
+ uint32_t y_tile_minimum = plane_blocks_per_line *
+ y_min_scanlines;
selected_result = max(method2, y_tile_minimum);
} else {
if ((ddb_allocation / plane_blocks_per_line) >= 1)
@@ -3632,7 +3640,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
if (level >= 1 && level <= 7) {
if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
fb->modifier[0] == I915_FORMAT_MOD_Yf_TILED)
- res_lines += 4;
+ res_lines += y_min_scanlines;
else
res_blocks++;
}
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
