Carl,
Thanks for testing. I gave you the credit for mentioning
LIBUSB_SUPPORT=1. I forgot about it.
W.
On 10/13/15 10:52 AM, Carl Karsten wrote:
looks like I need to set LIBUSB_SUPPORT
$ LIBUSB_SUPPORT=1 make
And now it is working as described, which is very nice.
+1 mainline
Q: What happens if there are 2 devices plugged in?
I am assuming it uses the first one it finds.
For my usage that is fine.
You might want to add an index or something, although in those cases
the person can just use the devpath. I expect most people will be
using this from a udev rule that acts on the device being plugged in.
On Sun, Oct 11, 2015 at 11:45 PM, Wojciech A. Koszek
<wojciech@xxxxxxxxxx> wrote:
Hello,
In May 2010 I've fixed fxload by adding LibUSB support.
After seeing Carl's e-mail I dug out a patches from backup, and made a repo
out of it:
https://github.com/wkoszek/fxload
So basically fxload would gain LibUSB support and much easier usage, since
the paths which fxload requires right now change for some devices doing
re-enumeration.
Back then I failed to get any replies. Retrying now in hope we could get
these fixes into mainline.
Thanks,
Wojciech
On 10/11/15 8:23 PM, Andrei Borzenkov wrote:
12.10.2015 01:29, Carl Karsten пишет:
man fxload - Firmware download to EZ-USB devices
fxload [ -v ] [ -l ] [ -D devpath ] ...
-D devpath
Specifies the "usbfs" path name for the device in
question, such
as /proc/bus/usb/004/080. This takes precedence over any
DEVICE
environment variable that may be set.
How do I figure out what the devpath is for the device I plugged in?
or.. how do I know what devnum will get assigned?
The device(s) I am working with:
juser@dc10b:~$ lsusb -s 2:9; lsusb -s 2:10
Bus 002 Device 009: ID 04e2:1410 Exar Corp.
Bus 002 Device 010: ID 1443:0007 Digilent Development board JTAG
Should be /dev/bus/usb/002/010 etc.
Ubuntu trusty lts
Linux dc10b 3.13.0-65-generic #106-Ubuntu SMP Fri Oct 2 22:08:27 UTC
2015 x86_64 x86_64 x86_64 GNU/Linux
--
Carl K
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
