Re: Can't get WPA3 to work...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On May 19, 2023, at 4:01 PM, rany <rany2@xxxxxxxxxx> wrote:
> 
> It appears that, at least according to this Cisco help page:
> https://documentation.meraki.com/MR/Wi-Fi_Basics_and_Best_Practices/WPA3_Encryption_and_Configuration_Guide#WPA3_192-bit
> that only WPA3-EAP 192-bit has this restriction and I could confirm it from my own testing.

  The pages do say that.  While I admit I haven't followed that in detail, it's a bit surprising that WPA3-EAP requires a particular EAP type and TLS ciphers.

  Alan DeKok.


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux