Can't get WPA3 to work...

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

I am trying to set up APs with WPA3, but can't get it to work. WPA2
works fine on the same hardware and software since more that 10
years. This is my third try with WPA3 in the past 3 years...

This is my setup:

__access_points__

Debian 11 Bullseye
hostapd 2.9.0 (or 2.10 from backports)
Qualcomm Atheros AR922X Wireless Network Adapter

__client_machines__

Debian 11 Bullseye
wpasupplicant 2.9.0 (or 2.10 from backports)
NetworkManager 1.30.6 (or 1.42.4 from backports)
Intel Centrino Advanced-N 6205 Wireless Network Adapter

Neither SAE nor WPA-EAP-SUITE-B-192 work, that means, either connection
attempts fail (without useful logs), or the SSID is greyed out on the
client machine. I will post configuration and logs, but first of all,
if you take a look at the software versions and the hardware above, is
there a "no-go" somewhere?

Thanks,

Robert

-- 
Robert Senger



_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux