On 07/08/2017 05:28 AM, Jouni Malinen wrote:
On Fri, Jul 07, 2017 at 10:16:17AM +0200, Nassim Dahmani wrote:
I am using a zcomax QCA9984 with candela driver to setup an access
points, it works I don't have any problems but the best debit i can
have is 22-24 Mo/s on one device which is really low when we know the
theorical 1,7 Gb/s that the card can provide,
That sounds like a driver/hardware specific item and not really a
generic hostapd question.. In other words, you'll likely have better
chances of getting answers from whoever provides you that driver than
this mailing list.
We can sustain about 1.3Gbps throughput using that zcomax and our driver/firmware.
For that matter, probably stock driver/firmware would perform similarly.
You might check the association and related messages to see if it is properly
negotiating /HT rates, and check with a sniff or looking at station tx/rx
stats to see if it is using nice encoding rates.
Thanks,
Ben
--
Ben Greear <greearb@xxxxxxxxxxxxxxx>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
