Hi everyone, I am using a zcomax QCA9984 with candela driver to setup an access points, it works I don't have any problems but the best debit i can have is 22-24 Mo/s on one device which is really low when we know the theorical 1,7 Gb/s that the card can provide, Here is my current hostapd conf: ### hostapd configuration file interface=wlp1s0 driver=nl80211 ### IEEE 802.11 ssid=test5g hw_mode=a channel=0 max_num_sta=128 auth_algs=1 ### DFS country_code=FR ieee80211d=1 #ieee80211h=1 ### IEEE 802.11n ieee80211n=1 ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] ### IEEE 802.11ac ieee80211ac=1 vht_oper_chwidth=1 vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1] vht_oper_centr_freq_seg0_idx=42 ### IEEE 802.11i wpa=2 wpa_key_mgmt=WPA-PSK wpa_passphrase=123456789 rsn_pairwise=CCMP ### hostapd event logger logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2 ### WMM wmm_enabled=1 uapsd_advertisement_enabled=1 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 Do you knwo how I can improve my conf to increase my debit? I am a newbie on this so if I forgot something please tell me i'll send it to you. Thanks for your help. Best Regards _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
