Sorry I didn't put the end of the conf file : wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 ### TX queue parameters tx_queue_data3_aifs=7 tx_queue_data3_cwmin=15 tx_queue_data3_cwmax=1023 tx_queue_data3_burst=0 tx_queue_data2_aifs=3 tx_queue_data2_cwmin=15 tx_queue_data2_cwmax=63 tx_queue_data2_burst=0 tx_queue_data1_aifs=1 tx_queue_data1_cwmin=7 tx_queue_data1_cwmax=15 tx_queue_data1_burst=3.0 tx_queue_data0_aifs=1 tx_queue_data0_cwmin=3 tx_queue_data0_cwmax=7 tx_queue_data0_burst=1.5 On Fri, Jul 7, 2017 at 10:16 AM, Nassim Dahmani <nassim@xxxxxxxxxxxxxxxxxxxxxxxx> wrote: > Hi everyone, > > I am using a zcomax QCA9984 with candela driver to setup an access > points, it works I don't have any problems but the best debit i can > have is 22-24 Mo/s on one device which is really low when we know the > theorical 1,7 Gb/s that the card can provide, > > Here is my current hostapd conf: > > ### hostapd configuration file > interface=wlp1s0 > driver=nl80211 > > ### IEEE 802.11 > ssid=test5g > hw_mode=a > channel=0 > max_num_sta=128 > auth_algs=1 > > ### DFS > country_code=FR > ieee80211d=1 > #ieee80211h=1 > > ### IEEE 802.11n > ieee80211n=1 > ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] > > ### IEEE 802.11ac > ieee80211ac=1 > vht_oper_chwidth=1 > vht_capab=[MAX-MPDU-11454][RXLDPC][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1] > vht_oper_centr_freq_seg0_idx=42 > > ### IEEE 802.11i > wpa=2 > wpa_key_mgmt=WPA-PSK > wpa_passphrase=123456789 > rsn_pairwise=CCMP > > ### hostapd event logger > logger_syslog=-1 > logger_syslog_level=2 > logger_stdout=-1 > logger_stdout_level=2 > > ### WMM > wmm_enabled=1 > uapsd_advertisement_enabled=1 > wmm_ac_bk_cwmin=4 > wmm_ac_bk_cwmax=10 > wmm_ac_bk_aifs=7 > > > Do you knwo how I can improve my conf to increase my debit? I am a > newbie on this so if I forgot something please tell me i'll send it to > you. > Thanks for your help. > > Best Regards _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap