RE: [PATCH 13/14] ctrl: Enable adding profiles for P2P device interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jouni,

> -----Original Message-----
> From: Jouni Malinen [mailto:j@xxxxx]
> Sent: Saturday, October 31, 2015 23:29
> To: Peer, Ilan
> Cc: hostap@xxxxxxxxxxxxxxxxxxx; Stern, Avraham
> Subject: Re: [PATCH 13/14] ctrl: Enable adding profiles for P2P device
> interface
> 
> On Thu, Oct 22, 2015 at 02:12:09PM +0000, Peer, Ilan wrote:
> > > > Redirect the commands ADD_NETWORK and SET_NETWORK from the
> global
> > > > control interface to the P2P Device interface to enable adding
> > > > netwrok profiles to the P2P Device interface.
> 
> > These were under CONFIG_TESTING_OPTIONS since we were not aware of
> any real use case for this other than hwsim testing. They can be supported on
> global control interface without limitation AFAIC.
> 
> In general, it may be fine to add CONFIG_TESTING_OPTIONS blocks in the
> implementation, but that is certainly not the preference and should be left for
> cases where testing cannot be done without the change. In this specific case, I
> don't see why this would need to be handled through
> wpas_global_ctrl_iface_redir_p2p(), i.e., the test script should be capable of
> directing the command to the appropriate interface directly.
> 

Ok. Will change the test case to distinguish between a configurations with/without P2P Device interface.

Thanks,

Ilan.

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux