i tried to install gstreamer-0.10.25.tar.bz2 ile. when i compile it by using the above script i got a error as *"libxml2"missing. so i downloaded libxml2 file and compiled that for arm processor using the same script and i exported the path of libxml2 by using ** * *"export PATH=$PATH:/home/iqbal/Desktop/libxml2-2.7.6/"* *and then again i compiled the same gstreamer-0.10.25 with using the same script. now i didnt find that error. but i am getting some different error shown below. whether am i doing the correct procedure?* *This is the error which i am getting when i compile the gstreamer after givng path of libxml2.* *"** CC gstvalue.o** **cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation** ** CC gstparse.o** **cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation** ** CC gstregistrybinary.o** **cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation* *CC gstxml.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstenumtypes.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation CC gstmarshal.o cc1: warning: include location "/usr/include/glib-2.0" is unsafe for cross-compilation LINK libgstreamer-0.10.la ../libtool: eval: line 950: syntax error near unexpected token `|' ../libtool: eval: line 950: `link -dump -symbols .libs/libgstreamer_0.10_la-gst.o .libs/libgstreamer_0.10_la-gstobject.o .libs/libgstreamer_0.10_la-gstbin.o .libs/libgstreamer_0.10_la-gstbuffer.o .libs/libgstreamer_0.10_la-**gstbufferlist.o .libs/libgstreamer_0.10_la-gstbus.o .libs/libgstreamer_0.10_la-gstcaps.o .libs/libgstreamer_0.10_la-gstchildproxy.o .libs/libgstreamer_0.10_la-gstclock.o .libs/libgstreamer_0.10_la-gstdebugutils.o .libs/libgstreamer_0.10_la-gstelement.o .libs/libgstreamer_0.10_la-gstelementfactory.o .libs/libgstreamer_0.10_la-gsterror.o .libs/libgstreamer_0.10_la-gstevent.o .libs/libgstreamer_0.10_la-gstfilter.o .libs/libgstreamer_0.10_la-gstformat.o .libs/libgstreamer_0.10_la-gstghostpad.o .libs/libgstreamer_0.10_la-gstindex.o .libs/libgstreamer_0.10_la-gstindexfactory.o .libs/libgstreamer_0.10_la-gstinfo.o .libs/libgstreamer_0.10_la-gstinterface.o .libs/libgstreamer_0.10_la-gstiterator.o .libs/libgstreamer_0.10_la-gstmessage.o .libs/libgstreamer_0.10_la-gstminiobject.o .libs/libgstreamer_0.10_la-gstpad.o .libs/libgstreamer_0.10_la-gstpadtemplate.o .libs/libgstreamer_0.10_la-gstparamspecs.o .libs/libgstreamer_0.10_la-gstpipeline.o .libs/libgstreamer_0.10_la-gstplugin.o .libs/libgstreamer_0.10_la-gstpluginfeature.o .libs/libgstreamer_0.10_la-gstpoll.o .libs/libgstreamer_0.10_la-gstpreset.o .libs/libgstreamer_0.10_la-gstquark.o .libs/libgstreamer_0.10_la-gstquery.o .libs/libgstreamer_0.10_la-gstregistry.o .libs/libgstreamer_0.10_la-gstsegment.o .libs/libgstreamer_0.10_la-gststructure.o .libs/libgstreamer_0.10_la-gstsystemclock.o .libs/libgstreamer_0.10_la-**gsttaglist.o .libs/libgstreamer_0.10_la-gsttagsetter.o .libs/libgstreamer_0.10_la-gsttask.o .libs/libgstreamer_0.10_la-gsttaskpool.o .libs/libgstreamer_0.10_la-gsttrace.o .libs/libgstreamer_0.10_la-gsttypefind.o .libs/libgstreamer_0.10_la-gsttypefindfactory.o .libs/libgstreamer_0.10_la-gsturi.o .libs/libgstreamer_0.10_la-gstutils.o .libs/libgstreamer_0.10_la-gstvalue.o .libs/libgstreamer_0.10_la-gstparse.o .libs/libgstreamer_0.10_la-gstregistrybinary.o .libs/libgstreamer_0.10_la-gstxml.o .libs/libgstreamer_0.10_la-gstenumtypes.o .libs/libgstreamer_0.10_la-gstmarshal.o parse/.libs/libgstparse.a | | /bin/sed 's/.* //' | sort | uniq > .libs/libgstreamer-0.10.exp' make[4]: *** [libgstreamer-0.10.la] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Building of glib library has failed iqbal at iqbal-laptop:~/Desktop/gstreamer-0.10.25$"* Kindly help me On Sun, Dec 27, 2009 at 3:13 PM, Niamathullah sharief <armsharief at gmail.com>wrote: > This is the script file i have... > i am running this script file each and every time.. > *#!/bin/sh > export PATH=$PATH:/home/iqbal/Desktop/Niamath/toolchain/bin/ > #export PARENT_DIR=/mnt/rbsys-icon1/ > #export > PATH=$PARENT_DIR/toolchain/bin/:/bin/:/usr/bin/:/sbin/:/mnt/monta-vista/montavista/pro/bin/ > #export > C6X_C_DIR="/mnt/rbsys-icon1/dvsdk_3_00_00_36/cgtools/include;/mnt/rbsys-icon1/dvsdk_3_00_00_36/cgtools/lib" > #export KERNEL_DIR=$PARENT_DIR//kernel/linux-02.01.01.07/ > #export SDK_DIR=$PARENT_DIR/dvsdk_3_00_00_36 > export ARCH=arm > export CROSS_COMPILE=arm-none-linux-gnueabi- > export HOST=i686-pc-linux-gnu* > *export T**ARGET=arm-linux-gnu > #export ROOTFS=$PARENT_DIR/nfs-develop > #export PREFIX=$PARENT_DIR/nfs-develop/usr/local > export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig/ > #export PATCH_SOURCE_DIR=/mnt/rbsys-icon1/patches_for_omap_sources/ > #export BASE_SOURCE_DIR=/mnt/rbsys-icon1/sources/ > #export DAVINCI_SOURCE_DIR=/mnt/rbsys-icon1/davinci_sources/ > #export PATCH_SOURCE_DIR=/mnt/rbsys-icon1/patches_for_omap_sources/ > #export > QTSOURCEDIR=$DAVINCI_SOURCE_DIR/qt-embedded-linux-opensource-src-4.5.2/ > #export QTDIR=$DAVINCI_SOURCE_DIR/qt-embedded-linux-opensource-src-4.5.2/ > #export FLASHCOMPONENT=$ROOTFS/flash_component/ > #export QMAKESPEC=$QTSOURCEDIR/mkspecs/qws/linux-arm-g++/ > export CFLAGS="-O3 -march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8 > -mfloat-abi=softfp -mfpu=neon -ftree-**vectorize -funroll-all-loops" > export CXXFLAGS="-O3 -march=armv7-a -mtune=cortex-a8 -mcpu=cortex-a8 > -mfloat-abi=softfp -mfpu=neon -ftree-vectorize -funroll-all-loops" > CC=arm-none-linux-gnueabi-gcc CXX=arm-none-linux-gnueabi-g++ > LD=arm-none-linux-gnueabi-ld AS=arm-none-linux-gnueabi-as > AR=arm-none-linux-gnueabi-ar RANLIB=arm-none-linux-gnueabi-ranlib > STRIP=arm-none-linux-gnueabi-strip OBJCOPY=arm-none-linux-gnueabi-objcopy > OBJDUMP=arm-none-linux-gnueabi-objdump ./configure --prefix=$PREFIX > --build=i386-pc-linux-gnu --host=arm-linux-gnu --without-python > --cache-file=cache-file PLATFORM=MX51 > > if [ $? != 0 ] > then > echo "Configuration of glib library has failed"; > exit 1; > fi* > *make > if [ $? != 0 ] > then > echo "Building of glib library has failed "; > exit 1; > fi > make uninstall > > make install > > if [ $? != 0 ] > then > echo "Installing of glib-library has failed "; > exit 1; > fi* > > IN this cript i know about this cross compiler exporting and all other > thngs i dont know. i got this script from my friend. he is using this script > to compile for OMAP arm and i have to compile for freescale processor arm > board. > > ll me. > AND in this two files which one have to compile? whether it is needed to > export any library files?i mean codec files? > please help me > >> >> doing cross-compilation and being a novice is not easy :-) >> >> you said that you exported some env var for you arm board. What exactly >> did you do ? >> >> Vincent Torri >> >> PS: please, stop top post your comments >> >> >> >>> On Sun, Dec 27, 2009 at 2:04 PM, Vincent Torri <vtorri at univ-evry.fr> >>> wrote: >>> >>> >>>> >>>> On Sun, 27 Dec 2009, Niamathullah sharief wrote: >>>> >>>> No i didnt install any gst-plugin-base. i dont know what are all the >>>> files >>>> >>>>> needed to compile the gstreamer for ARM board. and what are the >>>>> commands >>>>> used to compile. what are all things i have to export. so pleae help >>>>> me. >>>>> so >>>>> tell me what are all the files needed to compile for arm. now i have >>>>> 1)ARM coss compile >>>>> >>>>> >>>> download >>>> http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-0.10.25.tar.bz2 >>>> and >>>> >>>> >>>> http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-0.10.25.tar.bz2 >>>> >>>> >>>> 2)gst-fsl-plugin-1.6.0 >>>> >>>>> 3)fsl-mm-codeclib-1.6.0 >>>>> >>>>> THis are the steps i followed o compile the gstreamer >>>>> 1)i exported cross compiler path. >>>>> >>>>> >>>> compile and install gstreamer for your platform >>>> >>>> if you use: >>>> >>>> ./configure --prefix=/my/prefix/for/fsl >>>> >>>> execute: >>>> >>>> export PKG_CONFIG_PATH=/my/prefix/for/fsl/lib/pkgconfig >>>> >>>> Then compile and install gst-plugins-base for your platform with also: >>>> >>>> ./configure --prefix=/my/prefix/for/fsl >>>> >>>> >>>> 2)then i tried to compile this gst-fsl-plugin-1.6.0 >>>> >>>>> >>>>> >>>> Vincent Torri >>>> >>>> >>> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.freedesktop.org/archives/gstreamer-embedded/attachments/20091227/c3e4dcf4/attachment.htm>
