Hello Jan! :) No, the call gets connected at 10Mbps - that is the limit and is what when I do printcurrentcallsverbose says. But still, even half of it - each way, would be more than enough. I have investigated some more … with some packet captures and wireshark. The problem I have found - is that they connect using H.261 (not H.263 or H.264). So I guess for H.261 is ok to connect to 448p @ 375Kbps. Now, I have recompiled ffmpeg, ptlib and h323plus - and in the end gnugk - 10 times. Although I read on the internet lots of times that GnuGk doesn’t have to be aware of H.263 and H.264 apparently it is. Another tests: When I take them out of gatekepeer mode - In a direct call between 2 endpoints they connect to 720p @ 4Mbps When the equips are in gatekeeper mode - still a direct call between 2 endpoints they connect to 448p @ 375Kbps I also read a lot of posts explaining why h323plus doesn’t come with h.263 and h.264 and stuff … they are modules, and not in the h323plus library. Trying to keep this mail short - I think the problem appears in the lack of h.263 and h.264 from h323plus. Do you have any ideas what to test or debug? Thank you! On 11.06.2015, 12:40, "Jan Willamowius" <jan@xxxxxxxxxxxxxx> wrote: >Hi George, > >when you limit the call (both directions) to 1000 kbps, its seems ok to >me if each endpoint gets to send 500 kbps... > >Also, when settings the limits, beware of the units: Its in 100 bits >per second (not in bps and not kbps). > >Regards, >Jan > >-- >Jan Willamowius, Founder of the GNU Gatekeeper Project >EMail : jan@xxxxxxxxxxxxxx >Website: http://www.gnugk.org >Support: http://www.willamowius.com/gnugk-support.html > >Relaxed Communications GmbH >Frahmredder 91 >22393 Hamburg >Geschäftsführer: Jan Willamowius >HRB 125261 (Amtsgericht Hamburg) >USt-IdNr: DE286003584 > > >George BOROS wrote: >> Hello everybody, >> >> My setup on using gnugk is: >> - about 20 Cisco TelePresence terminals each registering as terminals >>with >> 1 e164 id to the gnugk; >> - a cluster of Cisco TelePresence Content Server (that records video >>content >> and does live feeds) - registered as a gateway with 2 prefixes (one for >>live >> feed and one for recording streams). >> >> The GK does not to proxy, no routed mode, no h245 routed mode, no >> autorization, nothing. >> A simple gatekeeper to keep them all in the same place. >> >> I migrated from using the gatekeeper option from a Cisco MCU to GnuGK. >> >> Ever since I do that, all calls do not connect to more than 500Kbps, >>even if >> when I initiate the call I set the speed of 4000Kbps to a call. >> >> It is to be noted that the options in the gatekepeer.ini are: >> TotalBandwidth=100000000 >> >> MinimumBandwidthPerCall=2048 >> >> MaximumBandwidthPerCall=10000 >> >> >> And also, when I do a printcurrentcallsverbose the calls says its >> connected to 10000 Š >> Although the server says the terminal asks for 500Kbps speed. >> >> Any ideas? :) >> >> Thanks! >> >> > > >-------------------------------------------------------------------------- >---- >_______________________________________________________ > >Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx >Archive: >http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users >Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users >Homepage: http://www.gnugk.org/ ------------------------------------------------------------------------------ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
