Hi Jan, Frank already helped me on this one, but thank you anyway. By the way, great community. Kind regards, Joao On Mon, Nov 26, 2012 at 7:50 PM, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote: > Hi Joao, > > use the first one: > > [RoutingPolicy] > default=explicit,internal,enum,srv,dns,internal,parent,neighbor > > The important thing is to have the SRV and DNS policy in the chain and > to configure the chain for all kinds of calls, not only for OnARQ. > You won't need parent and neighbor, but they won't hurt either. > > Regards, > Jan > > -- > Jan Willamowius, Founder of the GNU Gatekeeper Project > EMail : jan@xxxxxxxxxxxxxx > Website: http://www.gnugk.org > Support: http://www.willamowius.com/gnugk-support.html > > > Joao Alexandre wrote: >> Hi Frank, >> >> Copied from the manual: >> >> [RoutingPolicy] >> default=explicit,internal,enum,srv,dns,internal,parent,neighbor >> >> or >> >> [RoutingPolicy::OnARQ] >> default=numberanalysis,internal,neighbor >> >> Which would work without loosing the connectivity between internal VCs >> and dialing only by IP? >> >> I really cannot understand where does dialing 123@194.34.167.22 falls into. >> >> I'm an IT admin and have no knowledge whatsoever about this stuff, I >> was just trying to simplify and save some work to the VC operator and >> probably at the same time, some money for the company. >> >> Regards, >> >> Joao >> >> On Mon, Nov 26, 2012 at 11:34 AM, Frank Hinterland >> <f.hinterland@xxxxxxxxxx> wrote: >> > Hi Joao, >> > >> > have a look at the section [RoutingPolicy] in the docs. >> > >> > cheers, >> > frank >> > >> > Am 26.11.2012 11:21, schrieb Joao Alexandre: >> >> Hi All, >> >> >> >> I've been evaluating GnuGK 3.1 on a Debian Squeeze and set it up as >> >> per the "nat.ini" file plus some lines from things I've read. I've >> >> redirected the specified ports on the FW to the GnuGK box and I've >> >> registered 2 Cisco CTS-SX20 and 2 Sony PCS-G50 with this gatekeeper. >> >> >> >> Dialing each other is really a peace of cake, dialing an IP outside my >> >> organization (like the ones that Polycom provide for testing ex. >> >> 140.242.250.201) works OK, but when we try to dial something like >> >> 126.122.252.61##123 or 123@126.122.252.61 we've no luck. The logs says >> >> "...Q931s No destination for unregistered call...". The Cisco >> >> unregistered from the gatekeeper and with NAt on, can do the call >> >> dialing 123@126.122.252.61 as for the Sony we never been successful >> >> dialing 123@126.122.252.61 or 126.122.252.61##123. >> >> >> >> It would be nice to have always all the equipments registered at the >> >> GnuGK so that we don't have to manage the config depending on the >> >> destination calls. I've been searching the web looking for answers but >> >> I've no more clues, so I've decided to sign up to this mailing list >> >> and ask for some expert help. >> >> >> >> My gatekeeper.ini looks like this (all the IPs are scrambled): >> >> >> >> ----------------------------------------------------------------------------------------------- >> >> [Gatekeeper::Main] >> >> Fortytwo=42 >> >> TimeToLive=600 >> >> ExternalIP=224.69.159.45 >> >> ExternalIsDynamic=0 >> >> CompareAliasType=0 >> >> CompareAliasCase=0 >> >> ;;TraceLevel=5 >> >> >> >> [RoutedMode] >> >> GKRouted=1 >> >> AcceptUnregisteredCalls=1 >> >> H245Routed=0 >> >> CallSignalPort=1720 >> >> RemoveH245AddressOnTunneling=1 >> >> DropCallsByReleaseComplete=1 >> >> SupportNATedEndpoints=1 >> >> Q931PortRange=30000-30999 >> >> H245PortRange=31000-31999 >> >> EnableH46018=1 >> >> >> >> [Proxy] >> >> Enable=1 >> >> InternalNetwork=10.10.0.0/255.255.0.0 >> >> T120PortRange=50000-59999 >> >> RTPPortRange=50000-59999 >> >> >> >> [GkStatus::Auth] >> >> rule=allow >> >> >> >> [Gatekeeper::Auth] >> >> FileIPAuth=required >> >> >> >> [FileIPAuth] >> >> 92.95.251.12/32=allow >> >> 10.10.0.0/22=allow >> >> 10.10.35.0/24=allow >> >> 10.10.60.0/24=allow >> >> 10.10.90.0/24=allow >> >> any=reject >> >> >> >> [RasSrv::RRQFeatures] >> >> SupportDynamicIP=1 >> >> AliasTypeFilter=terminal;dialeddigits >> >> AliasTypeFilter=gateway;h323id >> >> >> >> [RasSrv::ARQFeatures] >> >> CallUnregisteredEndpoints=1 >> >> >> >> [LogFile] >> >> Rotate=Daily >> >> RotateTime=00:00 >> >> ----------------------------------------------------------------------------------------------- >> >> >> >> Any help or tip is much appreciated. >> >> >> >> Thanks in advance. >> >> >> >> Regards, >> >> >> >> Joao > > ------------------------------------------------------------------------------ > Monitor your physical, virtual and cloud infrastructure from a single > web console. Get in-depth insight into apps, servers, databases, vmware, > SAP, cloud infrastructure, etc. Download 30-day Free Trial. > Pricing starts from $795 for 25 servers or applications! > http://p.sf.net/sfu/zoho_dev2dev_nov > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
