Hi Joao, use the first one: [RoutingPolicy] default=explicit,internal,enum,srv,dns,internal,parent,neighbor The important thing is to have the SRV and DNS policy in the chain and to configure the chain for all kinds of calls, not only for OnARQ. You won't need parent and neighbor, but they won't hurt either. Regards, Jan -- Jan Willamowius, Founder of the GNU Gatekeeper Project EMail : jan@xxxxxxxxxxxxxx Website: http://www.gnugk.org Support: http://www.willamowius.com/gnugk-support.html Joao Alexandre wrote: > Hi Frank, > > Copied from the manual: > > [RoutingPolicy] > default=explicit,internal,enum,srv,dns,internal,parent,neighbor > > or > > [RoutingPolicy::OnARQ] > default=numberanalysis,internal,neighbor > > Which would work without loosing the connectivity between internal VCs > and dialing only by IP? > > I really cannot understand where does dialing 123@194.34.167.22 falls into. > > I'm an IT admin and have no knowledge whatsoever about this stuff, I > was just trying to simplify and save some work to the VC operator and > probably at the same time, some money for the company. > > Regards, > > Joao > > On Mon, Nov 26, 2012 at 11:34 AM, Frank Hinterland > <f.hinterland@xxxxxxxxxx> wrote: > > Hi Joao, > > > > have a look at the section [RoutingPolicy] in the docs. > > > > cheers, > > frank > > > > Am 26.11.2012 11:21, schrieb Joao Alexandre: > >> Hi All, > >> > >> I've been evaluating GnuGK 3.1 on a Debian Squeeze and set it up as > >> per the "nat.ini" file plus some lines from things I've read. I've > >> redirected the specified ports on the FW to the GnuGK box and I've > >> registered 2 Cisco CTS-SX20 and 2 Sony PCS-G50 with this gatekeeper. > >> > >> Dialing each other is really a peace of cake, dialing an IP outside my > >> organization (like the ones that Polycom provide for testing ex. > >> 140.242.250.201) works OK, but when we try to dial something like > >> 126.122.252.61##123 or 123@126.122.252.61 we've no luck. The logs says > >> "...Q931s No destination for unregistered call...". The Cisco > >> unregistered from the gatekeeper and with NAt on, can do the call > >> dialing 123@126.122.252.61 as for the Sony we never been successful > >> dialing 123@126.122.252.61 or 126.122.252.61##123. > >> > >> It would be nice to have always all the equipments registered at the > >> GnuGK so that we don't have to manage the config depending on the > >> destination calls. I've been searching the web looking for answers but > >> I've no more clues, so I've decided to sign up to this mailing list > >> and ask for some expert help. > >> > >> My gatekeeper.ini looks like this (all the IPs are scrambled): > >> > >> ----------------------------------------------------------------------------------------------- > >> [Gatekeeper::Main] > >> Fortytwo=42 > >> TimeToLive=600 > >> ExternalIP=224.69.159.45 > >> ExternalIsDynamic=0 > >> CompareAliasType=0 > >> CompareAliasCase=0 > >> ;;TraceLevel=5 > >> > >> [RoutedMode] > >> GKRouted=1 > >> AcceptUnregisteredCalls=1 > >> H245Routed=0 > >> CallSignalPort=1720 > >> RemoveH245AddressOnTunneling=1 > >> DropCallsByReleaseComplete=1 > >> SupportNATedEndpoints=1 > >> Q931PortRange=30000-30999 > >> H245PortRange=31000-31999 > >> EnableH46018=1 > >> > >> [Proxy] > >> Enable=1 > >> InternalNetwork=10.10.0.0/255.255.0.0 > >> T120PortRange=50000-59999 > >> RTPPortRange=50000-59999 > >> > >> [GkStatus::Auth] > >> rule=allow > >> > >> [Gatekeeper::Auth] > >> FileIPAuth=required > >> > >> [FileIPAuth] > >> 92.95.251.12/32=allow > >> 10.10.0.0/22=allow > >> 10.10.35.0/24=allow > >> 10.10.60.0/24=allow > >> 10.10.90.0/24=allow > >> any=reject > >> > >> [RasSrv::RRQFeatures] > >> SupportDynamicIP=1 > >> AliasTypeFilter=terminal;dialeddigits > >> AliasTypeFilter=gateway;h323id > >> > >> [RasSrv::ARQFeatures] > >> CallUnregisteredEndpoints=1 > >> > >> [LogFile] > >> Rotate=Daily > >> RotateTime=00:00 > >> ----------------------------------------------------------------------------------------------- > >> > >> Any help or tip is much appreciated. > >> > >> Thanks in advance. > >> > >> Regards, > >> > >> Joao ------------------------------------------------------------------------------ Monitor your physical, virtual and cloud infrastructure from a single web console. Get in-depth insight into apps, servers, databases, vmware, SAP, cloud infrastructure, etc. Download 30-day Free Trial. Pricing starts from $795 for 25 servers or applications! http://p.sf.net/sfu/zoho_dev2dev_nov _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
