Thanks Jan for all your answers. Bruno On 28/09/2012 23:06, Jan Willamowius wrote: > Hi, > > if the error only appears during the first second and the call > then works, that only means the H.460.18 / .19 port detection wsn't > complete when the first packets arrived. Thats ok. > > Regards, > Jan > > > Bruno Richard wrote: >> Hi Jan, >> >> thanks again for your so quick answer ! >> >> You were right : with the option EnableH46018=1 I don't have error >> messages during the call but some error messages >> are still here : >> 2012/09/28 14:09:14.738 3 ProxyChannel.cxx(8848) Proxy >> 193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 forward blocked >> 2012/09/28 14:09:14.738 3 ProxyChannel.cxx(7203) RTP >> 193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 socket has no >> destination address yet, flush ignored >> >> they occur only during the first second of the call. But it's perhaps >> without importance... >> >> >> about the option EnableH46018=1, I find mails you sent to the list : >> >> > GnuGk will act as traversal server and has to be on a public IP, then >> > endpoints behind firewalls can register and GnuGk will proxy the media >> > for these calls and use H.460.18 and .19 to get it through the firewall. >> > But the H.460 endpoint needs to register, I don't think you can do this >> > with unregistered endpoints. If the caller is unregistered, but not >> > firewalled, it can call a registered internal endpoint behind the >> > firewall. >> >> Does this mean that when the gatekeeper and the registered h323 clients >> are behind a firewall, it's necessary to add this option ? >> >> Thanks >> Bruno >> >> On 28/09/2012 01:20, Jan Willamowius wrote: >>> Hi Bruno, >>> >>> if you didn't restart the gatekeeper, make sure that at least the >>> endpoint registrations that have issues are using H.460.18 now. >>> You can connect to the status port and check with a >>> "PrintAllRegistrationsVerbose". >>> >>> You probably have to unregister those endpoints to get them on >>> H.460.18. >>> >>> Regards, >>> Jan >>> >>> Bruno Richard wrote: >>>> Hi Jan, >>>> >>>> thanks for the answer and sorry for my delai to answer. >>>> I modified my config and reload the config (is it sufficient ? I can't >>>> restart the gatekeeper these days as it's in use) but I'm still having >>>> error messages : >>>> 2012/09/27 13:57:05.179 3 ProxyChannel.cxx(7242) RTP >>>> 193.49.144.129:63066<=>0.0.0.0:18230<=>172.16.7.76:3232 Error(0): >>>> Input/output error (12:111) >>>> or >>>> 2012/09/27 13:58:53.871 3 ProxyChannel.cxx(7189) RTP >>>> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 socket has no >>>> destination address yet, 31 bytes queued >>>> 2012/09/27 13:58:53.871 3 ProxyChannel.cxx(8848) Proxy >>>> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 forward blocked >>>> >>>> My network configuration is classical : >>>> >>>> Internet<--> firewall<--> gatekeeper with public IP<--> M100 >>>> installed on a windows with a private IP >>>> >>>> My config is bellow. >>>> Thanks in advance for clues/answers >>>> Bruno >>>> >>>> cat /usr/local/gnugk/gatekeeper.ini >>>> [Gatekeeper::Main] >>>> Fortytwo=42 >>>> TraceLevel=3 >>>> ;TraceLevel=5 >>>> DefaultDomain=univ-lemans.fr >>>> >>>> [LogFile] >>>> Filename=/var/log/gk_trace.log >>>> Rotate=Weekly >>>> RotateDay=Sun >>>> RotateTime=00:59 >>>> >>>> [RoutedMode] >>>> GKRouted=1 >>>> H245Routed=1 >>>> AcceptUnregisteredCalls=1 >>>> AcceptNeighborCalls=1 >>>> CallSignalPort=1720 >>>> Q931PortRange=15000-15999 >>>> H245PortRange=16000-16999 >>>> ; Bruno le 26/9/2012 >>>> EnableH46018=1 >>>> >>>> [Proxy] >>>> Enable=1 >>>> InternalNetwork=192.168.0.0/255.255.0.0,172.16.0.0/255.240.0.0 >>>> RTPPortRange=18000-18999 >>>> >>>> [Gatekeeper::Auth] >>>> FileIPAuth=required;RRQ,LRQ,Setup >>>> >>>> [FileIPAuth] >>>> [...] >>>> >>>> On 26/09/2012 00:33, Jan Willamowius wrote: >>>>> Hi Bruno, >>>>> >>>>> without knowing about your network architecture, its hard to say what >>>>> went wrong, but you should enable H.460.18/.19 in GnuGk in case some of >>>>> your endpoints are behind a NAT or firewall. >>>>> >>>>> [Routed>Mode] >>>>> EnableH46018=1 >>>>> >>>>> Regards, >>>>> Jan >> -- >> --------------------------------------------------------------------- >> Bruno RICHARD >> Division des Systèmes d'Information >> Université du Maine >> Av. O. MESSIAEN 72085 LE MANS CEDEX 9 >> email : Bruno.Richard@xxxxxxxxxxxxxx >> Tél. : +33 2.43.83.27.79 Fax : +33 2 43 83 38 01 >> --------------------------------------------------------------------- >> >> >> ------------------------------------------------------------------------------ >> Got visibility? >> Most devs has no idea what their production app looks like. >> Find out how fast your code is with AppDynamics Lite. >> http://ad.doubleclick.net/clk;262219671;13503038;y? >> http://info.appdynamics.com/FreeJavaPerformanceDownload.html >> _______________________________________________________ >> >> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx >> Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users >> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users >> Homepage: http://www.gnugk.org/ >> > -- --------------------------------------------------------------------- Bruno RICHARD Division des Systèmes d'Information Université du Maine Av. O. MESSIAEN 72085 LE MANS CEDEX 9 email : Bruno.Richard@xxxxxxxxxxxxxx Tél. : +33 2.43.83.27.79 Fax : +33 2 43 83 38 01 --------------------------------------------------------------------- ------------------------------------------------------------------------------ How fast is your code? 3 out of 4 devs don\\\'t know how their code performs in production. Find out how slow your code is with AppDynamics Lite. http://ad.doubleclick.net/clk;262219672;13503038;z? http://info.appdynamics.com/FreeJavaPerformanceDownload.html _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
