Re: Proxy and Input/output error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jan,

thanks again for your so quick answer !

You were right : with the option EnableH46018=1 I don't have error 
messages during the call but some error messages
are still here :
2012/09/28 14:09:14.738    3    ProxyChannel.cxx(8848)    Proxy    
193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 forward blocked
2012/09/28 14:09:14.738    3    ProxyChannel.cxx(7203)    RTP    
193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 socket has no 
destination address yet, flush ignored

they occur only during the first second of the call. But it's perhaps 
without importance...


about the option EnableH46018=1, I find mails you sent to the list :

 > GnuGk will act as traversal server and has to be on a public IP, then
 > endpoints behind firewalls can register and GnuGk will proxy the media
 > for these calls and use H.460.18 and .19 to get it through the firewall.
 > But the H.460 endpoint needs to register, I don't think you can do this
 > with unregistered endpoints. If the caller is unregistered, but not
 > firewalled, it can call a registered internal endpoint behind the
 > firewall.

Does this mean that when the gatekeeper and the registered h323 clients 
are behind a firewall, it's necessary to add this option ?

Thanks
Bruno

On 28/09/2012 01:20, Jan Willamowius wrote:
> Hi Bruno,
>
> if you didn't restart the gatekeeper, make sure that at least the
> endpoint registrations that have issues are using H.460.18 now.
> You can connect to the status port and check with a
> "PrintAllRegistrationsVerbose".
>
> You probably have to unregister those endpoints to get them on
> H.460.18.
>
> Regards,
> Jan
>
> Bruno Richard wrote:
>> Hi Jan,
>>
>> thanks for the answer and sorry for my delai to answer.
>> I modified my config and reload the config (is it sufficient ? I can't
>> restart the gatekeeper these days as it's in use) but I'm still having
>> error messages :
>> 2012/09/27 13:57:05.179    3    ProxyChannel.cxx(7242)    RTP
>> 193.49.144.129:63066<=>0.0.0.0:18230<=>172.16.7.76:3232 Error(0):
>> Input/output error (12:111)
>> or
>> 2012/09/27 13:58:53.871    3    ProxyChannel.cxx(7189)    RTP
>> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 socket has no
>> destination address yet, 31 bytes queued
>> 2012/09/27 13:58:53.871    3    ProxyChannel.cxx(8848)    Proxy
>> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 forward blocked
>>
>> My network configuration is classical :
>>
>> Internet<-->  firewall<-->  gatekeeper with public IP<-->  M100
>> installed on a windows with a private IP
>>
>> My config is bellow.
>> Thanks in advance for clues/answers
>> Bruno
>>
>> cat /usr/local/gnugk/gatekeeper.ini
>> [Gatekeeper::Main]
>> Fortytwo=42
>> TraceLevel=3
>> ;TraceLevel=5
>> DefaultDomain=univ-lemans.fr
>>
>> [LogFile]
>> Filename=/var/log/gk_trace.log
>> Rotate=Weekly
>> RotateDay=Sun
>> RotateTime=00:59
>>
>> [RoutedMode]
>> GKRouted=1
>> H245Routed=1
>> AcceptUnregisteredCalls=1
>> AcceptNeighborCalls=1
>> CallSignalPort=1720
>> Q931PortRange=15000-15999
>> H245PortRange=16000-16999
>> ; Bruno le 26/9/2012
>> EnableH46018=1
>>
>> [Proxy]
>> Enable=1
>> InternalNetwork=192.168.0.0/255.255.0.0,172.16.0.0/255.240.0.0
>> RTPPortRange=18000-18999
>>
>> [Gatekeeper::Auth]
>> FileIPAuth=required;RRQ,LRQ,Setup
>>
>> [FileIPAuth]
>> [...]
>>
>> On 26/09/2012 00:33, Jan Willamowius wrote:
>>> Hi Bruno,
>>>
>>> without knowing about your network architecture, its hard to say what
>>> went wrong, but you should enable H.460.18/.19 in GnuGk in case some of
>>> your endpoints are behind a NAT or firewall.
>>>
>>> [Routed>Mode]
>>> EnableH46018=1
>>>
>>> Regards,
>>> Jan
>

-- 
---------------------------------------------------------------------
Bruno RICHARD
Division des Systèmes d'Information
Université du Maine
Av. O. MESSIAEN 72085 LE MANS CEDEX 9
email : Bruno.Richard@xxxxxxxxxxxxxx
Tél. : +33 2.43.83.27.79    Fax : +33 2 43 83 38 01
---------------------------------------------------------------------


------------------------------------------------------------------------------
Got visibility?
Most devs has no idea what their production app looks like.
Find out how fast your code is with AppDynamics Lite.
http://ad.doubleclick.net/clk;262219671;13503038;y?
http://info.appdynamics.com/FreeJavaPerformanceDownload.html
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/



[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux