Hi, if the error only appears during the first second and the call then works, that only means the H.460.18 / .19 port detection wsn't complete when the first packets arrived. Thats ok. Regards, Jan Bruno Richard wrote: > Hi Jan, > > thanks again for your so quick answer ! > > You were right : with the option EnableH46018=1 I don't have error > messages during the call but some error messages > are still here : > 2012/09/28 14:09:14.738 3 ProxyChannel.cxx(8848) Proxy > 193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 forward blocked > 2012/09/28 14:09:14.738 3 ProxyChannel.cxx(7203) RTP > 193.49.144.129:62860<=>0.0.0.0:18306<=>0.0.0.0:0 socket has no > destination address yet, flush ignored > > they occur only during the first second of the call. But it's perhaps > without importance... > > > about the option EnableH46018=1, I find mails you sent to the list : > > > GnuGk will act as traversal server and has to be on a public IP, then > > endpoints behind firewalls can register and GnuGk will proxy the media > > for these calls and use H.460.18 and .19 to get it through the firewall. > > But the H.460 endpoint needs to register, I don't think you can do this > > with unregistered endpoints. If the caller is unregistered, but not > > firewalled, it can call a registered internal endpoint behind the > > firewall. > > Does this mean that when the gatekeeper and the registered h323 clients > are behind a firewall, it's necessary to add this option ? > > Thanks > Bruno > > On 28/09/2012 01:20, Jan Willamowius wrote: > > Hi Bruno, > > > > if you didn't restart the gatekeeper, make sure that at least the > > endpoint registrations that have issues are using H.460.18 now. > > You can connect to the status port and check with a > > "PrintAllRegistrationsVerbose". > > > > You probably have to unregister those endpoints to get them on > > H.460.18. > > > > Regards, > > Jan > > > > Bruno Richard wrote: > >> Hi Jan, > >> > >> thanks for the answer and sorry for my delai to answer. > >> I modified my config and reload the config (is it sufficient ? I can't > >> restart the gatekeeper these days as it's in use) but I'm still having > >> error messages : > >> 2012/09/27 13:57:05.179 3 ProxyChannel.cxx(7242) RTP > >> 193.49.144.129:63066<=>0.0.0.0:18230<=>172.16.7.76:3232 Error(0): > >> Input/output error (12:111) > >> or > >> 2012/09/27 13:58:53.871 3 ProxyChannel.cxx(7189) RTP > >> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 socket has no > >> destination address yet, 31 bytes queued > >> 2012/09/27 13:58:53.871 3 ProxyChannel.cxx(8848) Proxy > >> 193.49.144.129:63034<=>0.0.0.0:18248<=>0.0.0.0:0 forward blocked > >> > >> My network configuration is classical : > >> > >> Internet<--> firewall<--> gatekeeper with public IP<--> M100 > >> installed on a windows with a private IP > >> > >> My config is bellow. > >> Thanks in advance for clues/answers > >> Bruno > >> > >> cat /usr/local/gnugk/gatekeeper.ini > >> [Gatekeeper::Main] > >> Fortytwo=42 > >> TraceLevel=3 > >> ;TraceLevel=5 > >> DefaultDomain=univ-lemans.fr > >> > >> [LogFile] > >> Filename=/var/log/gk_trace.log > >> Rotate=Weekly > >> RotateDay=Sun > >> RotateTime=00:59 > >> > >> [RoutedMode] > >> GKRouted=1 > >> H245Routed=1 > >> AcceptUnregisteredCalls=1 > >> AcceptNeighborCalls=1 > >> CallSignalPort=1720 > >> Q931PortRange=15000-15999 > >> H245PortRange=16000-16999 > >> ; Bruno le 26/9/2012 > >> EnableH46018=1 > >> > >> [Proxy] > >> Enable=1 > >> InternalNetwork=192.168.0.0/255.255.0.0,172.16.0.0/255.240.0.0 > >> RTPPortRange=18000-18999 > >> > >> [Gatekeeper::Auth] > >> FileIPAuth=required;RRQ,LRQ,Setup > >> > >> [FileIPAuth] > >> [...] > >> > >> On 26/09/2012 00:33, Jan Willamowius wrote: > >>> Hi Bruno, > >>> > >>> without knowing about your network architecture, its hard to say what > >>> went wrong, but you should enable H.460.18/.19 in GnuGk in case some of > >>> your endpoints are behind a NAT or firewall. > >>> > >>> [Routed>Mode] > >>> EnableH46018=1 > >>> > >>> Regards, > >>> Jan > > > > -- > --------------------------------------------------------------------- > Bruno RICHARD > Division des Systèmes d'Information > Université du Maine > Av. O. MESSIAEN 72085 LE MANS CEDEX 9 > email : Bruno.Richard@xxxxxxxxxxxxxx > Tél. : +33 2.43.83.27.79 Fax : +33 2 43 83 38 01 > --------------------------------------------------------------------- > > > ------------------------------------------------------------------------------ > Got visibility? > Most devs has no idea what their production app looks like. > Find out how fast your code is with AppDynamics Lite. > http://ad.doubleclick.net/clk;262219671;13503038;y? > http://info.appdynamics.com/FreeJavaPerformanceDownload.html > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------------ Got visibility? Most devs has no idea what their production app looks like. Find out how fast your code is with AppDynamics Lite. http://ad.doubleclick.net/clk;262219671;13503038;y? http://info.appdynamics.com/FreeJavaPerformanceDownload.html _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
