Re: Failover does not work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jan,
 
Thanks for your quick reply. DisableRetryChecks=1  did the trick.
 
But only checked failover,$ could not check on Round-robin yet.
 
Anyway i will upgrade to newer version asap.
 
Thanks !

Manjula Hettiarachchi

--- On Wed, 9/8/10, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote:

From: Jan Willamowius <jan@xxxxxxxxxxxxxx>
Subject: Re: Failover does not work
To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Date: Wednesday, September 8, 2010, 10:24 AM

Hi,

I would suggest you update to the latest version of GnuGk and try again.
In 2.2.8, the round-robin between gateways was broken and in alter
versions more calls can be retried in more situations.
Also, you should check the failure codes on the calls that are not
being retried. GnuGk will only retry calls that fail with the codes set
in FailoverCauses=.

If thats is not enough, you can try to set DisableRetryChecks=1 which
will also retry calls where the H.245 exchange has already started.
That will work sometimes, but is not entirely safe, so you should
first try if an updated cures the problem.

Regards,
Jan


manjula hettiarachchi wrote:
> Hi.
>  
> I use gnugk2.2.8 and tried to do gateway failover.
> The call hits the first GW and when failing with (34-no channels) no retrying happens even though ActivateFailover=1.
> The gateways are configured as permenant endpoints and do not register to gnugk. (can this cause the failure?)
> I can see in logs that the 3 gws are picked and selected the correct priorities
>  
> 2010/09/08 09:01:15.012 2             RasTbl.cxx(1331)  RASTBL  Gateway 2495_endp matched by prefix 5781#, priority: 1
> 2010/09/08 09:01:15.013 2             RasTbl.cxx(1331)  RASTBL  Gateway 2496_endp matched by prefix 5781#, priority: 3
> 2010/09/08 09:01:15.013 2             RasTbl.cxx(1331)  RASTBL  Gateway 2538_endp matched by prefix 5781#, priority: 2
>
>  
> Can anyone guide me to find the reason why it does not failover.
>  
> [RoutedMode]
> GKRouted=1
> H245Routed=1
> DropCallsByReleaseComplete=1
> SendReleaseCompleteOnDRQ=1
> ForwardOnFacility=0
> Q931PortRange=20000-20999
> H245PortRange=30000-30999
> ActivateFailover=1
> FailoverCauses=1-15,21-127
>
>
> Thanks in advance
> Manjula Hettiarachchi

--
Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux