Re: Tandberg Edge 95 unable to complete negotiation with gnugk227

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Much thanks, works great!

Regards, Don


Willamowius wrote:
> 
> Hi Don,
> 
> try GnuGk 2.2.8: In response to Paul's bug report we have fix the
> reading of fragmented TPKT packets.
> 
> Regards,
> Jan
> 
> 
> don_r wrote:
>> Hi
>> 
>> I'm having the same problem with my Edge 95's and gnugk 2.2.7. Did you
>> get
>> your issue resolved or have any hints on the resolution?
>> 
>> Thanks, Don
>> 
>> 
>> Paul.Hii wrote:
>> > 
>> > Hi,
>> > 
>> > we have been having an issue with a Tandberg Edge 95 MXP that is
>> failing 
>> > to establish calls via our gnugk 2.2.7.
>> > 
>> > Tandberg Edge 95 MXP (Malaysia) --- gnugk227 (Australia) --- Tandberg
>> 150 
>> > (Australia)
>> > 
>> > The gnugk227 is in routed mode and proxies all calls. Both the Edge 95
>> and 
>> > T150 are registered to the gnugk227.
>> > 
>> > The T150 initiated the call via the gnugk227 to Edge 95. The usual arq, 
>> > acf, q931 (setup, alert, connect) happens until the call connection
>> failed 
>> > in the exchange of h245 terminalCapabilitySet.
>> > 
>> > Please see the gnugk log below:
>> > 
>> > 2008/08/28 14:27:31.333 3       ProxyChannel.cxx(3719)  H245   
>> Connected 
>> > from T150:5559 on gnugk227:11473
>> > 2008/08/28 14:27:31.436 3       ProxyChannel.cxx(3751)  H245    Connect
>> to 
>> > edge95:11016 from gnugk227:0 successful
>> > 2008/08/28 14:27:31.436 5       ProxyChannel.cxx(5088)  ProxyH(5) total 
>> > sockets 4
>> > 2008/08/28 14:27:31.437 5                job.cxx(426)   JOB     Job 
>> > H245Connector deleted
>> > 2008/08/28 14:27:31.437 5                job.cxx(415)   JOB     Worker 
>> > threads: 21 total - 19 busy, 2 idle
>> > 2008/08/28 14:27:31.511 5           yasocket.cxx(783)   ProxyH(5)      
>> 1 
>> > sockets selected from 4, total 4/0
>> > 2008/08/28 14:27:31.511 5       ProxyChannel.cxx(623)   H245s   Reading 
>> > from T150:5559
>> > 2008/08/28 14:27:31.512 4       ProxyChannel.cxx(1093)  H245   
>> Received: 
>> > request terminalCapabilitySet {
>> > .................
>> > 2008/08/28 14:27:31.513 4       ProxyChannel.cxx(4487)  H245   
>> Request: 
>> > terminalCapabilitySet
>> > 2008/08/28 14:27:31.581 5           yasocket.cxx(783)   ProxyH(5)      
>> 1 
>> > sockets selected from 4, total 4/0
>> > 2008/08/28 14:27:31.581 5       ProxyChannel.cxx(623)   H245d   Reading 
>> > from edge95:11016
>> > 2008/08/28 14:27:31.681 4           yasocket.cxx(656)   H245d
>> edge95:11016 
>> > Error(0): Timeout
>> > 2008/08/28 14:27:31.693 5           yasocket.cxx(783)   ProxyH(5)      
>> 1 
>> > sockets selected from 4, total 4/0
>> > 2008/08/28 14:27:31.693 5       ProxyChannel.cxx(623)   H245d   Reading 
>> > from edge95:11016
>> > 2008/08/28 14:27:31.693 2       ProxyChannel.cxx(631)   Proxy
>> edge95:11016 
>> > NOT TPKT PACKET!
>> > 2008/08/28 14:27:31.693 5           yasocket.cxx(783)   ProxyH(5)      
>> 1 
>> > sockets selected from 4, total 4/0
>> > 2008/08/28 14:27:31.693 5       ProxyChannel.cxx(623)   H245d   Reading 
>> > from edge95:11016
>> > 2008/08/28 14:27:31.693 2       ProxyChannel.cxx(631)   Proxy
>> edge95:11016 
>> > NOT TPKT PACKET!
>> > 
>> > Syslog on the edge95 showed that the edge95 did receive and respond to
>> the 
>> > request for terminalCapabilitySet from the gnugk227.
>> > 
>> > We have had many calls by Tandberg endpoints via the gnugk227 without 
>> > problem except for this particular model, Edge 95 MXP.
>> > 
>> > Any idea what could be cause of the Timeout and NOT TPKT PACKET?
>> > 
>> > Thanks in advance for all help.
>> > 
>> > Cheers,
>> > Paul
> 
> 
> -- 
> Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/
> 
> ------------------------------------------------------------------------------
> Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco,
> CA
> -OSBC tackles the biggest issue in open source: Open Sourcing the
> Enterprise
> -Strategies to boost innovation and cut costs with open source
> participation
> -Receive a $600 discount off the registration fee with the source code:
> SFAD
> http://p.sf.net/sfu/XcvMzF8H
> _______________________________________________________
> 
> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive:
> http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
> 
> 

-- 
View this message in context: http://www.nabble.com/Tandberg-Edge-95-unable-to-complete-negotiation-with-gnugk227-tp19323814p22110413.html
Sent from the GNU Gatekeeper Users mailing list archive at Nabble.com.


------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux