Hi Jan, Thanks for your prompt reply . From your suggestion I tried with 2.2.3-2 stable release and also with 2.2.2 stable release with the same config file and it is working as normal . But randomly getting "no audio" problem with 2.2.4-FailOver-SnapShot with the same config file . Here is My CDR Log: Call-10|UserIP=69.xx.xx.69|Pin=xxxxxxxxx|Tel=xxxxxxxxx|DialedNo=02127|Start=2006-04-16 01:25:50 |Stop=2006-04-16 01:25:57|RingTime=2 | Duration=5 | TotalDuration=6 | PDD=1 |DisCause=16| WhoDisc=1 |GW=69.xx.xx.12 | Attempt=1 |LastCDR=0 |CallersRtpIP=127.0.0.1 |Codec=G7231 Thanks once again . Regrads, ..Tusar.. On 4/19/06, Jan Willamowius <jan@xxxxxxxxxxxxxx> wrote: > Hi Tusar, > > these "no audio" problems usually tend to be network related. Could you > please verify if it also happens when you use the 2.2.3-2 release in the > same setup ? > > Thanks, > Jan > > > Tusar wrote: > > Hi Jan, > > > > I have downloaded GnuGK FailOver Snapshot from > > http://www.gnugk.org/failover-snapshot.html and compiled successfully > > without error .When I am sending call , phone is ringing but not > > getting ringback tone or Audio after connected . If I make 10 calls > > then 1/2 call had ringback and Voice as normal but the rest of the > > calls had "NO AUDIO" . It is happening at NATed endpoint or even from > > Public IP's endpoint. > > > > Here is below my .ini file . > > > > # gnugk.ini > > # ========= > > > > [Gatekeeper::Main] > > Fourtytwo=42 > > Name=GnuGK > > TimeToLive=120 > > > > > > [RoutedMode] > > GKRouted=1 > > H245Routed=1 > > CallSignalPort=1721 > > CallSignalHandlerNumber=2 > > RtpHandlerNumber=2 > > RemoveH245AddressOnTunneling=1 > > DropCallsByReleaseComplete=1 > > RemoveCallOnDRQ=1 > > SendReleaseCompleteOnDRQ=1 > > AcceptNeighborsCalls=1 > > AcceptUnregisteredCalls=1 > > SupportNATedEndpoints=1 > > TcpKeepAlive=1 > > ConnectTimeout=60000 > > SetupTimeout=30000 > > SignalTimeout=30000 > > ForwardOnFacility=1 > > ShowForwarderNumber=1 > > TranslateFacility=1 > > SocketCleanupTimeout=5000 > > Q931PortRange=20000-20999 > > H245PortRange=30000-30999 > > ActivateFailover=1 > > FailoverCauses=1-15,21-127 > > > > > > [Proxy] > > Enable=1 > > InternalNetwork=10.0.0.0/8,172.16.0.0/12,192.168.0.0/16 > > T120PortRange=40000-40999 > > RTPPortRange=50000-59999 > > ProxyForNAT=1 > > > > > > [CallTable] > > DefaultCallDurationLimit=7200 > > IRRFrequency=0 > > IRRCheck=FALSE > > SingleFailoverCDR=TRUE > > > > [GkStatus::Auth] > > default=forbid > > rule=explicit > > 127.0.0.1=allow > > KeyFilled=123 > > Shutdown=disable > > DelayReject=3 > > > > > > [Gatekeeper::Auth] > > default=allow > > > > [Gatekeeper::Acct] > > FileAcct=optional;stop > > > > [FileAcct] > > DetailFile=/usr/local/gatekeeper/cdr.log > > StandardCDRFormat=0 > > > CDRString=Call-%n|IP=%{caller-ip}:%{caller-port}|Pin=%u|Tel=%{Calling-S > tation-Id}|DialedNo=%{Dialed-Number}|RewrNo=%{Called-Station-Id}|Start= > %{connect-time}|Stop=%{disconnect-time}|ConfID=%{ConfId}|SessID=%s|Ring > Time=%{ring-time} > > | Duration=%d | TotalDuration=%t | PDD=%p |DisCause=%c| WhoDisc=%r > > |GW=%{callee-ip}:%{callee-port} | Attempt=%{call-attempts} > > |LastCDR=%{last-cdr} |CallersRtpIP=%{media-oip} |Codec=%{codec} > > TimestampFormat=MySQL > > UseDialedNumber=1 > > > > > > [RasSrv::RRQFeatures] > > AcceptGatewayPrefixes=1 > > OverwriteEPOnSameAddress=1 > > AcceptEndpointIdentifier=1 > > IRQPollCount=0 > > > > [RasSrv::ARQFeatures] > > CallUnregisteredEndpoints=1 > > RoundRobinGateways=1 > > ArjReasonRouteCallToSCN=1 > > ArjReasonRouteCallToGatekeeper=1 > > RemoveTrailingChar=# > > > > ## For Permanent END Point > > [RasSrv::PermanentEndpoints] > > 69.xx.xx.12=TestGW1;02 > > 69.xx.xx.13=TestGW2;02 > > > > ## GW Name and Prefixes > > [RasSrv::GWPrefixes] > > TestGW1=02 > > TestGW2=02 > > > > ## Call control Per Gateway, 1 = Highest Priority > > > > [EP::TestGW1] > > Capacity=2 > > GatewayPriority=1 > > > > [EP::TestGW2] > > Capacity=3 > > GatewayPriority=2 > > > > ;;;;; gnugk.ini EOF ;;;;;; > > > > > > Note : With the same ini file gnugk-v.2.3.3 or gnugk-v.2.2.2 working > fine . > > > > > > Thanks and Regards. > > > > ..Tusar.. > > > > > > ------------------------------------------------------- > > Using Tomcat but need to do more? Need to support web services, > security? > > Get stuff done quickly with pre-integrated technology to make your job > easier > > Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 > > _______________________________________________________ > > > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id_49 > > Unsubscribe: > http://lists.sourceforge.net/lists/listinfo/openh323gk-users > > Homepage: http://www.gnugk.org/ > > > > > -- > Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmdlnk&kid0709&bid&3057&dat1642 > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id…49 > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id…49 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
