Hi Tusar, these "no audio" problems usually tend to be network related. Could you please verify if it also happens when you use the 2.2.3-2 release in the same setup ? Thanks, Jan Tusar wrote: > Hi Jan, > > I have downloaded GnuGK FailOver Snapshot from > http://www.gnugk.org/failover-snapshot.html and compiled successfully > without error .When I am sending call , phone is ringing but not > getting ringback tone or Audio after connected . If I make 10 calls > then 1/2 call had ringback and Voice as normal but the rest of the > calls had "NO AUDIO" . It is happening at NATed endpoint or even from > Public IP's endpoint. > > Here is below my .ini file . > > # gnugk.ini > # ========= > > [Gatekeeper::Main] > Fourtytwo=42 > Name=GnuGK > TimeToLive=120 > > > [RoutedMode] > GKRouted=1 > H245Routed=1 > CallSignalPort=1721 > CallSignalHandlerNumber=2 > RtpHandlerNumber=2 > RemoveH245AddressOnTunneling=1 > DropCallsByReleaseComplete=1 > RemoveCallOnDRQ=1 > SendReleaseCompleteOnDRQ=1 > AcceptNeighborsCalls=1 > AcceptUnregisteredCalls=1 > SupportNATedEndpoints=1 > TcpKeepAlive=1 > ConnectTimeout=60000 > SetupTimeout=30000 > SignalTimeout=30000 > ForwardOnFacility=1 > ShowForwarderNumber=1 > TranslateFacility=1 > SocketCleanupTimeout=5000 > Q931PortRange=20000-20999 > H245PortRange=30000-30999 > ActivateFailover=1 > FailoverCauses=1-15,21-127 > > > [Proxy] > Enable=1 > InternalNetwork=10.0.0.0/8,172.16.0.0/12,192.168.0.0/16 > T120PortRange=40000-40999 > RTPPortRange=50000-59999 > ProxyForNAT=1 > > > [CallTable] > DefaultCallDurationLimit=7200 > IRRFrequency=0 > IRRCheck=FALSE > SingleFailoverCDR=TRUE > > [GkStatus::Auth] > default=forbid > rule=explicit > 127.0.0.1=allow > KeyFilled=123 > Shutdown=disable > DelayReject=3 > > > [Gatekeeper::Auth] > default=allow > > [Gatekeeper::Acct] > FileAcct=optional;stop > > [FileAcct] > DetailFile=/usr/local/gatekeeper/cdr.log > StandardCDRFormat=0 > CDRString=Call-%n|IP=%{caller-ip}:%{caller-port}|Pin=%u|Tel=%{Calling-S tation-Id}|DialedNo=%{Dialed-Number}|RewrNo=%{Called-Station-Id}|Start= %{connect-time}|Stop=%{disconnect-time}|ConfID=%{ConfId}|SessID=%s|Ring Time=%{ring-time} > | Duration=%d | TotalDuration=%t | PDD=%p |DisCause=%c| WhoDisc=%r > |GW=%{callee-ip}:%{callee-port} | Attempt=%{call-attempts} > |LastCDR=%{last-cdr} |CallersRtpIP=%{media-oip} |Codec=%{codec} > TimestampFormat=MySQL > UseDialedNumber=1 > > > [RasSrv::RRQFeatures] > AcceptGatewayPrefixes=1 > OverwriteEPOnSameAddress=1 > AcceptEndpointIdentifier=1 > IRQPollCount=0 > > [RasSrv::ARQFeatures] > CallUnregisteredEndpoints=1 > RoundRobinGateways=1 > ArjReasonRouteCallToSCN=1 > ArjReasonRouteCallToGatekeeper=1 > RemoveTrailingChar=# > > ## For Permanent END Point > [RasSrv::PermanentEndpoints] > 69.xx.xx.12=TestGW1;02 > 69.xx.xx.13=TestGW2;02 > > ## GW Name and Prefixes > [RasSrv::GWPrefixes] > TestGW1=02 > TestGW2=02 > > ## Call control Per Gateway, 1 = Highest Priority > > [EP::TestGW1] > Capacity=2 > GatewayPriority=1 > > [EP::TestGW2] > Capacity=3 > GatewayPriority=2 > > ;;;;; gnugk.ini EOF ;;;;;; > > > Note : With the same ini file gnugk-v.2.3.3 or gnugk-v.2.2.2 working fine . > > > Thanks and Regards. > > ..Tusar.. > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642 > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id_49 > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id?49 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
