Re: GK Behind Router

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




 Hi Stewart,
I have set up the networkInterfaces as you told me and in any other way.
 (for example 81.32.50.208/0 or "/24" or "/32" or without "/")

I'm using the version 2.2.3-2 and 2.0.9 with same results.

The RRQ packet when arrives at the gk is a
    UDP   destAdd=10.0.0.23 destPort=1719 sourceAdd=62.102.107.32.
    H225 : RRQ
        callSignalAddress...TransportAddress...ipAddress=62.102.107.32 and
port
        1720

I have also tried several router/nat:
    SONICWALL  model=TZ 170 this is a router + nat + firewall that
      acknowledge voip (h323 and sip)
      clearly, i have tried working with either firewall and h323
functionality off.

    AETHRA this is a router+nat for h323 too  (...but this is cheaper)

    U.S. ROBOTICS this is a generic router + nat for home users.

I turn off the windows firewall and the telefony service on my windows xp
machine.

anyway,
Thank you stewart.

                        -Luca-







> > ----- Original Message ----- 
> > From: "Stewart Nelson" <sn@xxxxxxxxxxx>
> > To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
> > Sent: Sunday, September 18, 2005 5:04 PM
> > Subject: Re:  GK Behind Router
> >
> >
> > > Hi Luca,
> > >
> > > Your NetworkInterfaces statement is still not correct,
> > > please try NetworkInterfaces=10.0.0.23/24,81.32.50.208/0 (not /29).
> > >
> > > If it still fails, please confirm that you get the same error
> > > with version 2.0.x (there was a bug in this area in some 2.2.x
> versions).
> > >
> > > If still no luck, please verify that the source IP address of the
> > > RRQ packet, when it arrives at the gk, is the public 62.102.107.32.
> > > If not, your NAT box, or some other intervening firewall, is acting as
> > > an application level gateway, which may not be compatible with gnugk.
> > >
> > > If that's not the problem, either, I have no idea what might be wrong.
> > > There are many users (of 2.0.x) with the GK behind a NAT.
> > >
> > > Perhaps it's possible for you to put a second NIC in gnugk and
> > > give it both public and private addresses.  If you don't have a
> > > spare public IP, maybe you could run NAT and gnugk on the same
> > > machine.
> > >
> > > --Stewart
> > >
> > > ----- Original Message ----- 
> > > From: "-Luca-" <noceluca@xxxxxxxxxxx>
> > > To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
> > > Sent: Sunday, September 18, 2005 4:29 PM
> > > Subject: Re:  GK Behind Router
> > >
> > >
> > > > Hi,
> > > > First off all, i want to thank Stewart, for his advices.
> > > >
> > > > I have set up the networkInterfaces as steward told me. I also have
> try
> > to
> > > > remove the home statement.
> > > > ..But nothing is changed. (the gatekeeper continue to put its
internal
> > > > address in the h225 packets)
> > > > Clearly, i have tried many possible configurations of the
> gatekeeper.ini
> > > > file.
> > > >
> > > > There is anyone know how gatekeeper selects its networkInterface?
> > > > Look down at my network architecture.
> > > >                                         _ _ _ _ _ _ _ _ _  _ _ _ _
_
> _
> > _ _
> > > > _ _ _ _
> > > >                                         |the gatekepeer network
> > > > |
> > > >                                         |
> > > > |
> > > >                                         |
> > > > |
> > > >                                         |
> > > > |
> > > >                (client) -------> |  (router/nat) ----------> (gnugk)
> > > > |
> > > >        62.102.107.32          |  81.32.50.208
10.0.0.23
> > > > |
> > > >                                         |
> > > > |
> > > >                                         |_ _ _ _ _ _ _ _ _ _ _ _ _ _
_
> _
> > _
> > > > _ _ _ _ |
> > > > The client is a netmeeting having a public ip address, the gk is
> behind
> > a
> > > > router/nat.
> > > > The router nat all the incoming tcp toward 81.32.50.208 to 10.0.0.23
> of
> > the
> > > > gnugk, the router doesn't change the tcp port.
> > > > (router doesn't do Port Address Translation)
> > > >
> > > > So, how the gk understands that in the h225 message, it must set up
> its
> > > > transportAddress eqaual to router ip address?
> > > >
> > > >
> > > > I' am attaching my gatekeeper.ini
> > > >
> > > > Thanks a lot.
> > > >
> > > >                    -Luca-
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Stewart Nelson" <sn@xxxxxxxxxxx>
> > > > To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
> > > > Sent: Saturday, September 17, 2005 1:56 PM
> > > > Subject: Re:  GK Behind Router
> > > >
> > > >
> > > >> Hi Luca,
> > > >>
> > > >> Try NetworkInterfaces=10.0.0.23/24,xx.xx.xx.xx/0
> > > >> Also try removing Home= statement.
> > > >>
> > > >> Look at the incoming RRQ.  Make sure source address
> > > >> is public IP of endpoint and internal addresses are
> > > >> public / private according to whether endpoint
> > > >> isn't / is NATed.  If NATed, make sure private
> > > >> network of endpoint is *not* 10.0.0.0/24 .
> > > >>
> > > >> If the above does not help, try with gnugk 2.0.9 .
> > > >>
> > > >> --Stewart
> > > >>
> > > >> ----- Original Message ----- 
> > > >> From: "-Luca-" <noceluca@xxxxxxxxxxx>
> > > >> To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
> > > >> Sent: Saturday, September 17, 2005 12:41 PM
> > > >> Subject: Re:  GK Behind Router
> > > >>
> > > >>
> > > >> > Hi,
> > > >> > I'm Luca and i'm trying to do work gnugk behind a router.
> > > >> > I set up the networkInterface= ip of my router/nat...  but not
> works.
> > > >> >
> > > >> > I have captured the packet that gatekeeper send to client with
> > ethereal,
> > > > and
> > > >> > i have seen that gk sets its internal ip into the packet.
> > > >> > For example, when my client try to register to the gk with RRQ,
the
> > gk
> > > > reply
> > > >> > with RCF in which the field
> > > >> > callSignalAddres...transportAddres...ipAddress=10.0.0.23 (that is
> the
> > > >> > internal ip of gk instead that router/nat ip).
> > > >> >
> > > >> > What i've got wrong?
> > > >> >
> > > >> > I' am attaching my gatekeeper.ini
> > > >> >
> > > >> > Thanks a lot.
> > > >>
> > > >>
> > > >>
> > > >> -------------------------------------------------------
> > > >> SF.Net email is sponsored by:
> > > >> Tame your development challenges with Apache's Geronimo App Server.
> > > >> Download it for free - -and be entered to win a 42" plasma tv or
your
> > very
> > > >> own Sony(tm)PSP.  Click here to play:
> > http://sourceforge.net/geronimo.php
> > > >> _______________________________________________________
> > > >>
> > > >> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > > >> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> > > >> Unsubscribe:
> > http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> > > >> Homepage: http://www.gnugk.org/
> > > >>
> > > >
> > >
> > >
> > > -------------------------------------------------------
> > > SF.Net email is sponsored by:
> > > Tame your development challenges with Apache's Geronimo App Server.
> > > Download it for free - -and be entered to win a 42" plasma tv or your
> very
> > > own Sony(tm)PSP.  Click here to play:
> http://sourceforge.net/geronimo.php
> > > _______________________________________________________
> > >
> > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> > > Unsubscribe:
> http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> > > Homepage: http://www.gnugk.org/
> > >
> >
> >
> > -------------------------------------------------------
> > SF.Net email is sponsored by:
> > Tame your development challenges with Apache's Geronimo App Server.
> > Download it for free - -and be entered to win a 42" plasma tv or your
very
> > own Sony(tm)PSP.  Click here to play:
http://sourceforge.net/geronimo.php
> > _______________________________________________________
> >
> > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> > Unsubscribe:
http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> > Homepage: http://www.gnugk.org/
> >
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by:
> Tame your development challenges with Apache's Geronimo App Server.
> Download it for free - -and be entered to win a 42" plasma tv or your very
> own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
> _______________________________________________________
>
> Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
> Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
> Homepage: http://www.gnugk.org/
>


-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________________

Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux