|
You can not register your gateway in two
different gatekeepers at the same time. The secondary gatekeeper config in your
Tenor would work in case of any problems in the connection between gateway and
the primary gatekeeper.
Since your gateway is registered into your
primary gatekeeper it wouldn't register itself into the secondary and that's why
the calls would get ARJ through the second gatekeeper but not the first
one.
- Bahram
----- Original Message -----
Sent: Sunday, September 11, 2005 2:06
AM
Subject: Two Gnugk
having single tenor quintum
Hi dear.....
Let the scenerio as follows,
I have two
GnuGK in two PC having both public IP and a tenor quintum A800 also having
public IP.
Now I configure .ini as
follows,
[RasSrv::GWPrefixes]
bab=345
And in quintum, in
conf->h323gw section I change as follows,
Primary GK Address =
xxx.xxx.xxx.xx1
Primary Auto Discovery = 0
Secondary GK Address =
xxx.xxx.xxx.xx2
Secondary Auto Discovery = 0
H.323 ID = bab
when
I call through xxx.xxx.xxx.xx1, it works very fine.
but when I call through
xxx.xxx.xxx.xx2, the calls are drpped and the calls may route to
xxx.xxx.xxx.xx1
because, telneting xxx.xxx.xxx.xx2 it shows
ACF|.........................................|false;
DCF|.........................................|normalDrop;
but
telneting xxx.xxx.xxx.xx1 it shows
ARJ|..........................................true|routeCallToGatekeeper;
Have
any idea to solve it ???
--
Regards........
VOIP
Support
|
