Hello,
Yesterday, we installed Gnugk-2.2.3 from CVS on FreeBSD-5.4-STABLE as
2005/06/23.
We are using HP Proliant ML370 server with Dual 3.06GHz CPU, 1GB RAM,
73GB HDD.
1.How many concurrent calls can to handle on this hardware (direct
routed, gatekeeper routed, full proxy mode)?
2.Is there any tool make measure/generate concurrent calls?
3.We are trying to use Gnugk for following scenarios.
=====================================
a.PSTN<----AS5300<-----Gnugk<-----AS5300<----Oversea partner AS5300,
Quintum D3000, Vocaltec gatekeeper, Nextone session controller, H323
gatekeeper from Cosmobridge, H323 gatekeeper based on
PWLib/OpenH323Lib
b.PSTN---->AS5300----->Gnugk----->Oversea partner AS5300, Quintum
D3000, Vocaltec gatekeeper, Nextone session controller, H323 gatekeeper
from Cosmobridge, H323 gatekeeper based on PWLib/OpenH323Lib
c.PSTN<----AS5300<-----Gnugk<-----Oversea partner AS5300, Quintum
D3000, Vocaltec gatekeeper, Nextone session controller, H323 gatekeeper
from Cosmobridge, H323 gatekeeper based on PWLib/OpenH323Lib
We need to setup first scenario during 1-2 weeks time before completely
move termination traffic to Gnugk.
Second/third scenario planning after complete move
termination/origination traffic to Gnugk.
Any suggestion on scenario?
Today, we tried to get work first scenario, but we see problem. I think
we made mistake on configuration. Don't know which one is wrong.
Gnugk config
==============
## Gatekeeper ini file
##
[Gatekeeper::Main]
Fourtytwo=42
Name=gnugk1
Home=x.x.x.x
TimeToLive=600
StatusPort=7000
UseBroadcastListener=0
[GkStatus::Auth]
;rule=regex | password
;regex=^(y\.y\.y\.y)$
;admin=sl55R5XHyeq+mjw6enTtXQ==
;DelayReject=10
;KeyFilled=123
[Gatekeeper::Auth]
;AliasAuth=sufficient;RRQ
;RadAliasAuth=required;RRQ,ARQ
;RadAuth=required;RRQ,ARQ
default=allow
[RadAuth]
Servers=z.z.z.z:1645
LocalInterface=
RadiusPortRange=10000-11000
DefaultAuthPort=1645
SharedSecret=cisco
RequestTimeout=2000
IdCacheTimeout=9000
SocketDeleteTimeout=60000
RequestRetransmissions=4
RoundRobinServers=1
AppendCiscoAttributes=1
IncludeTerminalAliases=1
IncludeEndpointIP=1
[Gatekeeper::Acct]
;RadAcct=required
[RadAcct]
Servers=z.z.z.z
LocalInterface=
RadiusPortRange=12000-13000
DefaultAcctPort=1646
SharedSecret=cisco
RequestTimeout=3500
IdCacheTimeout=9000
SocketDeleteTimeout=60000
RequestRetransmissions=4
RoundRobinServers=1
AppendCiscoAttributes=1
IncludeTerminalAliases=1
IncludeEndpointIP=1
[RoutedMode]
GKRouted=1
H245Routed=1
CallSignalPort=1720
CallSignalHandlerNumber=100
RtpHandlerNumber=100
RemoveH245AddressOnTunneling=1
AcceptNeighborsCalls=1
AcceptUnregisteredCalls=1
SupportNATedEndpoints=1
DropCallsByReleaseComplete=1
RemoveCallOnDRQ=1
SendReleaseCompleteOnDRQ=1
ScreenDisplayIE=1
ScreenCallingPartyNumberIE=1
ForwardOnFacility=1
ShowForwarderNumber=1
Q931PortRange=20000-20999
H245PortRange=30000-30999
[Proxy]
Enable=1
#InternalNetwork=192.168.0.0/255.255.255.0
#T120PortRange=40000-40999
##RTPPortRange=50000-59999
#RTPPortRange=10000-19999
#ProxyForNAT=1
#ProxyForSameNAT=1
[RasSrv::GWPrefixes]
;AS5300GW=004
;ASTERISK=005
;UB-GW1=098
UB-GW2=004
[RasSrv::RewriteE164]
;001=1
;098=004
;0167=004
;0199=004
UB-GW3=in=0199=004
UB-GW3=in=0167=004
[RasSrv::PermanentEndpoints]
;a.a.a.a=AS5300GW;004
b.b.b.b=ASTERISK;005
c.c.c.c=UBGW1;098
[NATedEndpoints]
#[SQLAcct]
#Driver=MySQL
#Host=localhost
#Database=voipdb
#Username=<removed>
#Password=<removed>
#StartQuery=
#UpdateQuery=
#StopQuery=insert into voip_accounting set
h323_connect_time=NULLIF('%{connect-time}','')::TIMESTAMP(0) WITH
TIME ZONE,acctsta
tustype='Stop',h323_remote_address=NULLIF('%{callee-ip}',
'')::INET,h323_call_type='',calledstationid='%{Called-Station-Id}',n
asipaddress='%{gkip}',h323_call_origin='',acctsessiontime='%d',acctdelaytime='0',h323_setup_time=NULLIF('%{setup-time}','')::T
IMESTAMP(0) WITH TIME
ZONE,h323_voice_quality='',h323_gw_id='%g',callingstationid='%{Calling-Station-Id}',acctsessionid='%s',h
323_disconnect_cause='%c',h323_disconnect_time=NULLIF('%{disconnect-time}','')::TIMESTAMP(0)
WITH TIME ZONE,time_stamp=unix_ti
mestamp(),card_number='%u',cisco_nas_port='%{caller-port}',custani_code='%{src-info}',h323_conf_id='%{ConfId}'
#StopQueryAlt=
[LogFile]
Rotate=daily
RotateTime=4:00
How can we to get work first scenario?
If possible second/third scenario sample config too?
Regards,
Balgaa
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
