We have gnugk at our office (our engineers write software to complement CCM) running against every version of CCM (same gnugk). 4.1.3 is the latest version we have running. Well, we have a CCM per engineer, so about 30 of them, and we use GK to talk to all of the CCMs and Asterisk boxes on our network. Is 4.1 the only version you cannot get to work? Internally, we use CCM for our IP phones so we can chew our own food, but use asterisk fro VM and IVR functionality. We are a pure Linux shop. Our PRI is MGCP controlled by our production CCM cluster. Calls from CCM phones work fine, but SIP phones dialing from Asterisk -> oh323 -> gk -> CCM -> PRI get dropped after a few seconds of trying. Asterisk get DRQ from gatekeeper and drops the calls. Inbound to SIP works just fine though - bad because I work from home a lot, so wee ended up having to use a Broadvoice number for outbound SIP with this config.. -Greg On Wed, 2005-06-08 at 13:21 -0600, Jason Swenson wrote: > Has anyone gotten gnugk to operate with Cisco Call Manager 4.1? I get > registation to go through, but end up with a fast busy when I try and > dial out. Calls coming in don't seem to even go through the > gatekeeper. > > Look for some help, cisco engineers are having problems gett this to > operate as well. > > Jason ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. How far can you shotput a projector? How fast can you ride your desk chair down the office luge track? If you want to score the big prize, get to know the little guy. Play to win an NEC 61" plasma display: http://www.necitguy.com/?r=20 _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
