|
I was thinking of two ways,
1-) You register the asterisk as a permenant
endpoint and attach a prefix to that. Under that prefix you can then call all
the endpoints behind asterisk
2-) YOu have already registred asterisk with its
endpoints dialed-digits so every cll that comes to the gatekeeper with that
alias will actually call the asterisk, so it should have worked in this
case.
Gentian
----- Original Message -----
Sent: Thursday, May 05, 2005 12:56
PM
Subject:
Asterisk+GNUGK
Hi,
Maybe this is off topic, but I thought there is
somebody who can help me in this list.
I'm trying to configure
asterisk-1.0.7 to work with gnugk-2.0.8. Something like:
SIP phones
-> ASTERISK -> GNUGK ->Cisco GW -> PSTN
|
h323 phones
Following is
h323.conf in
Asterisk:
--------------------------------------------------------------------------------
[general]
port
= 1720
bindaddr = MailScanner
has detected a possible fraud attempt from "0.0.0.0" claiming to be
0.0.0.0
disallow=all
allow=g729
gatekeeper =
x.x.x.x
secret = 1234
AllowGKRouted = yes
noFastStart =
yes
noH245Tunneling = yes
noSilenceSuppression =
yes
[30598272]
type=h323
prefix=1100001,1100005,1100006,1100007
context=home
;e164=1100007
[1100005]
type=user
context=home
incominglimit=4
--------------------------------------------------------------------
sip.conf
in
asterisk
--------------------------------------------------------------------
[general]
port=5060
; Port to bind to
bindaddr=MailScanner has detected a possible
fraud attempt from "0.0.0.0" claiming to be 0.0.0.0
; Address to bind SIP channel to
context=home
; Default context for incoming
calls
musicclass=default
;videosupport=yes
allow=g729
allow=g723
;externip
= MailScanner has detected a
possible fraud attempt from "202.179.0.164" claiming to be
202.179.0.164
;localnet=MailScanner has detected a possible fraud attempt from
"192.168.0.0" claiming to be
192.168.0.0/255.255.0.0
[1100001]
type=friend
username=1100001
;secret=1111
host=dynamic
nat=yes
defaultip=MailScanner has detected a
possible fraud attempt from "192.168.0.11" claiming to be
192.168.0.11
context=home
canreinvite=no
callerid=1100001
mailbox=1100001@local
[1100002]
type=friend
username=1100002
;secret=2222
nat=yes
host=dynamic
context=home
canreinvite=no
callerid=1100002
mailbox=1100002@local
[1100005]
type=friend
username=1100005
;secret=1234
defaultip=MailScanner has detected a
possible fraud attempt from "192.168.0.62" claiming to be
192.168.0.62
nat=yes
host=dynamic
context=home
canreinvite=no
callerid=1100005
mailbox=1100005@local
[1100006]
type=friend
username=1100006
;secret=4321
host=dynamic
context=home
canreinvite=no
callerid=1100006
mailbox=1100006@local
--------------------------------------------------------------------------------
As
in above configuration I'm registering Asterisk as an endpoint to gnugk.
It
is working and I can make calls from SIP phones to PSTN.
However my
question is, how can I call from h323 endpoints to SIP
phones or vice versa
in above case?
Is it possible? I'm afraid, it can't since asterisk is
itself an one
endpoint to gnugk.
If possible how can I make it
work?
If not, is it possible to register or make each SIP phones to be
known to gnugk?
How can I accomplish that? Ideally this solution could be
the best.
It would be very helpful if somebody can show me the config
samples, or give me some hints and advices.
thanks in
advance,
Ganbold
|
